9450-0012-2-P Laticrete 3' x 5' x 1/2" HYDRO BAN Board - Pallet

Laticrete 3' x 5' x 1/2" HYDRO BAN Board - 60 Piece Pallet

Laticrete HYDRO BAN Board is a lightweight, high-density foam backer board. This shower panel is made from high density polystyrene which is coated in a reinforced waterproof layer. Weighing approximately 5 lbs., installation of these foam, tile backer boards is a quick and easy job.

Packaging

• 1/2" x 3' x 5' sheet panel
• 60 panels per pallet
• Screws and Washers Sold Separately

HYDRO BAN Board Applications

• Tile installations
• Showers, kitchens, tub surrounds
• Steam rooms (when used with a vapor barrier)
• Use to construct your own benches, seats and curbs
• For interior use only; not for use in submerged applications

Advantages

• Light weight - under 5 lbs!
• Ready to tile
• Easy to handle
• Made with waterproof, high-density polystyrene core
• Coated with a reinforced waterproof layer
• Adds additional insulation to the assembly
• Cuts easily with a knife
• Part of the LATICRETE Lifetime System Warranty
• Attaches to metal or wood framing using HYDRO BAN Board Tab Washer and Screws (sold separately) - Washers required for ceiling panels only
• Remember to use HYDRO BAN Waterproofing Membrane on the screws/washers to maintain a fully waterproofed installation
• Use as a fully adhered wall board over masonry or cementitious substrates

Suitable Substrates (Interior Only)

• Wood or metal studded walls
• Masonry, brick, or concrete

Common Questions

Is Hydroban board waterproof?

HYDRO BAN® Board is a lightweight easy to handle and ready to tile wall board designed to be used in bonded tile or stone installations. It is made with a high-density, waterproof extruded polystyrene core and a reinforced, waterproof membrane on both sides to give triple protection from water and vapor intrusion.

What is hydroban board made of?

Laticrete HYDRO BAN Board is a lightweight, high-density foam backer board. The shower panel is made from waterproof, high density polystyrene which is coated in a reinforced waterproof layer. Weighing approximately 5 lbs., installation of these foam backer board panels is a quick and easy job.