StoneTech Stone, Masonry and Grout Enhancer and SealerFeatures- Easier to use, water-based formula
- Enriches color
- Standard protection against most stains
- Interior use
Where to Use- Natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone and textured stone, masonry and grout
Directions- Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris
- Ensure work area is well-ventilated during application and until surface is dry
- Shake well before using
- Apply product evenly and liberally using a paint pad, low-pressure chemical-resistant sprayer, roller or brush. Avoid applying product on unintended surfaces
- Allow product to penetrate the surface for 15–30 minutes; denser material may require maximum time for Enhancer to penetrate
- Keep surface wet with sealer, adding more product if needed to prevent dry spots, for the entire penetration time
- Following penetration time, completely wipe surface clean and dry with absorbent towels
- DO NOT ALLOW EXCESS ENHANCER TO DRY COMPLETELY ON SURFACE
- A second coat may be needed for porous, absorbent surfaces or if a darker appearance is required
- Apply second coat 1 hour after first coat following directions in steps 1 and 2
- A full cure is achieved after 24–72 hours; foot traffic may begin in 6–8 hours. If needed sooner, cover the floor with red rosin paper to protect it until the recommended time periods have passed
- Clean tools used during application with water
Available Sizes and Coverage- Quart: 20-65 sq ft
- Gallon: 75-250 sq ft
- 5 Gallon: 375-1,250 sq ft
- Expected Wear: 3-5 years
|
