Laticrete Quick Cure Hydro Ban Waterproofing Membrane

Laticrete Quick Cure Hydro Ban Waterproofing Membrane - 1 Gallon

Hydro Ban Quick Cure is a rapid, ready-to-use waterproofing membrane with wet-sure technology that allows it to cure even in humid, cold, or damp environments. The Quick Cure waterproofing membrane allows for flood testing within just 30 minutes—the contractor can install a full shower system all in one day!

Features

• 1-gallon unit approximate coverage - 134 ^ft/gal
• Designed for both commercial and residential tile installations suited for interior substrates
• Easily applied with a paintbrush or roller
• Bonds directly to metal, PVC, stainless steel, and ABS drain assemblies
• It can be used in humid, cold, and damp environments
• Allows for flood testing in 30 min. at 70°F (21°C) or higher
• Allows for crack isolation up to 1/16 when applied at 30 mils thick; anything over will require the use of fabric within any cove, corner, movement joint, and other areas of transition
• Thin; only 0.012" (0.3 mm) thick when cured
• Exceeds ANSI A118.10
• No solvents and non-flammable
• Install tile, brick, and stone directly onto the membrane
• Eco-friendly, Low VOC

Uses

• Swimming pools, fountains and water features
• Shower pans, stalls, and tub surrounds
• Industrial, commercial, and residential bathrooms and laundries
• Spas and hot tubs
• Kitchens and food processing areas
• Terraces and balconies over unoccupied spaces
• Countertops

Suitable Substrates

• Concrete
• Concrete and Brick Masonry
• Cement Mortar Beds
• Cement Plaster
• Gypsum Wallboard
• Exterior Glue Plywood
• Ceramic Tile and Stone
• Cement Terrazzo
• Cement Backer Board
• Poured Gypsum Underlayment