I applied 2 coats of gold sealer. This was done months ago. I would prefer a low sheen look however. Can I apply the low sheen aqua mix directly over the gold sealer ?

Aquamix does not recommend applying the Low Sheen Aqua Mix sealer on top of the Gold Sealer. The best way to get a low sheen look after applying the sealer would be to have it polished.

I'm planning to use this product on the partially sandy grout between glass tiles. What is the procedure for protecting the glass while doing it, or should i also cover the glass tile with it? I also have grout between ceramic and porcelain tiles and I'm wondering if I should seal the whole thing or just the grout between the tiles and if so how to protect the tiles while doing that

This product is not meant to be used on glass. Its recommended to very carefully apply the sealer in the grout lines around glass. However, with porcelain and ceramic, you are able to use the sealer on the tile and grout.

I just installed granite tiles over my balcony should I seal with this first or do grouting first then seal with this? Also Does this help prevent leaks under balcony?

You can seal either before or after grouting or both which ever you prefer. You will just need to adhere to the manufacturer guidelines when applying this the sealer. This sealer is more for stain resistance rather than waterproofing but will aid in the water not saturating the tiles and will bead up when hitting the surface.

What works best for saltillo don't want it shiny?

This product is supposed to dry with a "no sheen" look. It is recommended to test on a small, discreet area first prior to applying to the entire floor.

I applied Enrich N Seal on outdoor slate about 9 months ago, looked good! Would like to refresh, can I just reapply after cleaning with soapy water & let dry? Or would another product line be better to use? Thank you.

Since you had great results with this product we would recommend to continue using it. Just allow the stone to dry prior to using this product.

I used this on 2"bathroom ceramic floor tile and grout last Fall. The tile and grout look good but my husband wants to reseal it. Can I just go over it with this again or do I have to take previous sealer off first?

You need to ensure the surface is clean and dry for at least 24 hours prior to applying an additional coat of sealer. There are no additional steps.

1 2

Aqua Mix Sealers Choice Gold Penetrating Sealer | 1 Pint

Name: Aqua Mix Sealers Choice Gold Penetrating Sealer
Brand: Aquamix
SKU: 10400-1 Pt.
Price: 26.2 USD
Availability: InStock

$26²⁰ USD ~~$32⁷⁵~~

Shipping calculated at checkout.

Brand: Aquamix | SKU: 10400-1 Pt. | MPN:

Container Size

1 Pint 1 Quart 1 Gallon

Product variants

Shipping & Delivery

$13.95 Flat Rate shipping for orders under $500 (Other options at checkout)
Same-day shipping cut-off time for ground orders for CD stock items is 3:00 PM ET
Same-day shipping cut-off time for expedited orders for CD stock items is 12:00 PM ET
Shipping time is calculated by business days. Weekends do not count.
For Freight Items See Policy Here

Aqua Mix Sealers Choice Gold Penetrating Tile Sealer

Features

New modernized and innovative formulation is PFAS-Free, with no forever chemicals!
Premium, no-sheen, natural look, low VOC, water-based penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas
NEW Rapid Cure Formula protects in less than 4 hours and is designed to achieve optimal penetration into dense, low-porosity surfaces
May also be used as a pre-grouting sealer over clean stone surfaces a minimum of 1 hour prior to grouting
Use on all natural stone (such as marble, granite, slate, travertine, and limestone), porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout where a natural look is desired
Not recommended for use with composite or engineered stone
Expected wear is up to 15 years. Extreme weather conditions, harsh cleaning methods and high-alkaline or solvent-based cleaners will affect wear
Effective for interior and exterior applications
Coverage: Approximately 300 to 1,500 sq. ft. per coat per gallon, depending on type of stone, porosity and texture of surface, temperature, humidity and method of application

Tile and Stone Sealer Application

For new installations, sealer can be applied as soon as 48 hours after grouting
Surface must be clean, dry, and free of existing sealers or coatings
Apply using a sponge, brush, paint pad, cotton towel, or sprayer
Be sure any sealer that does not penetrate surface is removed from surface within 5 minutes of each application using absorbent paper or cotton towels
If 2 or more coats are applied, allow a minimum of 30 minutes drying time between coats
2 hours after final coat conduct a test to determine if surface is completely sealed by applying water droplets to the surface
If water is absorbed, apply an additional coat. Wait 2 hours and repeat the test
Ready for surface traffic in 2 hours after final coat
Keep area dry for 12 hours, achieves a full cure in 24 hours
Clean applicator tools with water after each use
Pre-Grouting Application apply over clean stone or tile a minimum of 2 hours prior to grouting, follow application procedures above

Product Manuals

Manual

Additional Info

5 stars: 7 (88%)
4 stars: 1 (13%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Aqua Mix Sealers Choice Gold Penetrating Sealer

Great service and good pricing !

Great product that works well for our needs. Contractor's Direct offers the best pricing on this item even when compared with the "big box" stores. When I call Contractor's Direct I am always dealing with people that are very upbeat and helpful. I tell everyone that I can about Contractor's Direct.

Easy to do business with !

I like dealing with Contractor's Direct. They are very polite and professional. Orders are processed very quickly

Excellent

Excellent. Well worth the shipping cost I paid to get it to the UK. The UK doesnt have a brand this good. It works. I applied two coats 24 hours apart.

easy to apply

very easy to apply. works good with marble and I used a brush to apply it. does not change the look of the finished product. sometimes sealers change the color and ruin the look

auqamix

dries quick, the water beads up when it touches the surface. works great for a long time

best sealer on the market

All the research I have done on sealers this one always came out on top. many positive reviews with this product and when I seal the grout the tile, marble looks good

5 Stars

dries very quick and it looks great!

I need to know if this sealer is UV Rated so it will not turn yellow with sunlight

Contractors D.

Yes, this product is UV Stable.

I have stoned floor (little stones with grout) in my shower. Can I use this and how many coats should I use?

Contractors D.

Per the manufacturer's recommendation you should use 2 applications with a 30 minute drying period between each application

Can you use this product to seal quartzite counters?

Contractors D.

Yes, this can be used on quartzite.

How long is a container of Sealer's Choice gold, good for, once it's been opened?

Contractors D.

As long as you store and use between temperatures of 45° F 85° F (7° C 29° C), the product will be good until the expiration date listed on the product or with the data sheet provided with the product.

I am looking to apply sealer on outdoor terracotta. Im looking for a glossy look. its a high traffic area. What would you recommend and how long will the sealer last?

Contractors D.

If you are looking for a shine we recommend using the Aqua Mix Seal & Finish Low Sheen Sealer, item#020552-4. This product has an expected wear of up to 15 years. However, extreme conditions or high traffic may affect wear time.