17 questions
Can the 24 inch cutter cut tile that is 24 inches in length?
by Lewis 7/21/2017 6:49:29 pm
The 63P3 is 63cm metric which measures to 24.80"
Does the monolit cutter have inches on the scale or does it only come in metric
by Daniel 10/3/2017 10:02:45 pm
The Montolit Evolution tile cutters that we offer are in sold with "standard" measurements in inches.
Does the cutter come with a carrying case?
by M Cutler 10/9/2017 3:35:20 pm
The Montolit tile cutter does not come with a case. There is a cover that can be purchased separately Click Here to view
Is this Montolit tile cutter able to cut glass?
by F. Scantilli 10/9/2017 3:36:41 pm
This tile cutter is capable of cutting glass tile, though it would likely have a rougher edges than if that same tile were to be cut on a wet tile saw.
So from 0-3" it has the blue sticker inlay for standard measurements?
by Michael H 2/5/2018 4:55:53 pm
Michael,
That is correct!
Thanks for contacting Contractors Direct.
Where can I get replacement metal breaker pads?
by SBayerl 2/12/2018 10:48:06 pm
Please check the parts list here and contact our customer service team to place the order for the part needed.
What material is the scoring handle made out of? Metal? Plastic? Thanks.
by Sean McGrath 6/8/2018 9:34:01 am
The handle is made of a durable cast-Aluminum.
Will it come with a cutting wheel and if so will that will cut porcelain?
by Jason 2/27/2019 12:43:50 pm
Yes this comes with a scoring wheel that will be suitable for cutting porcelain tile.
How do you change the cutting wheel
by Thornton Shackelford 2/28/2019 10:03:35 pm
Here is video showing to change the cutting wheels.
https://www.youtube.com/watch?v=x6n51qhD-cw
doing a large job with 3/4" thick large format "everblue" exterior porcelain tiles. anyone used this cutter for something that thick with success?
by Steve Minster 4/16/2019 12:28:18 pm
This cutter can cut materials from 1/4"-1" so it can cut tiles at that thickness
Does the cutter come with the WD oil & the titanium wheel?
by L Crawford 4/24/2019 10:02:15 pm
Yes this cutter comes with the WD oil and titanium scoring wheel.
Do you sell the replacement rubber feet for the 61" Montolit?
by Bill 1/8/2020 9:04:07 am
5 rubber feet are included when you purchase the Montolit assorted parts kit available here.
I use a lot of 12" x 24" porcelain tile ,what size cutter do you recommend ?
by Bill 6/5/2020 10:47:33 pm
We would recommend the 29 inch tile cutter because that will allow you to cut a 12" x 24" tile diagonally. With the 29 inch cutter, you can cut all angles without a problem, which will give you the most versatility on the job.
I do a lot of tile, my question is there a cutter machine thats cuts 48" or more in length .
by William Boanerges 6/19/2020 7:07:57 pm
Yes, both the 125P3 (49" length of cut) and 155P3 (61" length of cut) will cut tiles larger than 48".
Can this be used to cut the score-and-snap vinyl plank tiles that are becoming popular now?
by Marc Paolella 1/5/2021 2:27:32 am
This unit is not recommended for cutting vinyl
Can you cut a non-smooth surfaced tile with this cutter? The tile I have to cut has a slight wave surface. It’s a 4” x 12” tile and I’ll have to cut off one end at a 45 in order to start a herringbone pattern.
by Rich Robinson 11/18/2021 6:15:26 pm
Yes, you can power through tile like that with the Montolit tile cutter.
Can the 125P3 cut 24x48” porcelain tile?
by Irene Caruso 7/22/2023 8:33:32 pm
Yes, the 125P3 can cut up to 49 inch length-wise but it will only be able to cut a 34.5 inch tile diagonally.