Back
Questions & Answers
11 questions
Write a question

I used this on 2" bathroom ceramic floor tile and grout last Fall. The tile and grout look good but my husband wants to reseal it. Can I just go over it with this again or do I have to take previous sealer off first?

You need to ensure the surface is clean and dry for at least 24 hours prior to applying an additional coat of sealer. There are no additional steps.

What works best for saltillo don't want it shiny?

This product is supposed to dry with a "no sheen" look. It is recommended to test on a small, discreet area first prior to applying to the entire floor.

I applied Enrich N Seal on outdoor slate about 9 months ago, looked good! Would like to refresh, can I just reapply after cleaning with soapy water & let dry? Or would another product line be better to use?
Thank you.

Since you had great results with this product we would recommend to continue using it. Just allow the stone to dry prior to using this product.

I just installed granite tiles over my balcony should I seal with this first or do grouting first then seal with this? Also Does this help prevent leaks under balcony?

You can seal either before or after grouting or both which ever you prefer. You will just need to adhere to the manufacturer guidelines when applying this the sealer. This sealer is more for stain resistance rather than waterproofing but will aid in the water not saturating the tiles and will bead up when hitting the surface.

I applied 2 coats of gold sealer. This was done months ago. I would prefer a low sheen look however. Can I apply the low sheen aqua mix directly over the gold sealer ?

Aquamix does not recommend applying the Low Sheen Aqua Mix sealer on top of the Gold Sealer. The best way to get a low sheen look after applying the sealer would be to have it polished.

I am looking to apply sealer on outdoor terracotta. Im looking for a glossy look. its a high traffic area. What would you recommend and how long will the sealer last?

If you are looking for a shine we recommend using the Aqua Mix Seal & Finish Low Sheen Sealer, item#020552-4. This product has an expected wear of up to 15 years. However, extreme conditions or high traffic may affect wear time.

I'm planning to use this product on the partially sandy grout between glass tiles. What is the procedure for protecting the glass while doing it, or should i also cover the glass tile with it? I also have grout between ceramic and porcelain tiles and I'm wondering if I should seal the whole thing or just the grout between the tiles and if so how to protect the tiles while doing that

This product is not meant to be used on glass. It's recommended to very carefully apply the sealer in the grout lines around glass. However, with porcelain and ceramic, you are able to use the sealer on the tile and grout.

How long is a container of Sealer's Choice gold, good for, once it's been opened?

As long as you store and use between temperatures of 45° F ­ 85° F (7° C ­ 29° C), the product will be good until the expiration date listed on the product or with the data sheet provided with the product.

Can you use this product to seal quartzite counters?

Yes, this can be used on quartzite.

I have stoned floor (little stones with grout) in my shower. Can I use this and how many coats should I use?

Per the manufacturer's recommendation you should use 2 applications with a 30 minute drying period between each application

I need to know if this sealer is UV Rated so it will not turn yellow with sunlight

Yes, this product is UV Stable.