StoneTech Salt Water Resistant Sealer

StoneTech Salt Water Resistant Sealer

Features

• High-performance protection against saltwater damage
• For natural stone and masonry surfaces around saltwater pools
• Protection against water-based stains
• Preserves natural look
• Easy-to-use, water-based formula

Where to Use

• Porous tile, natural stone, concrete pavers, terracotta, and grout
• Best suited for porous substrates. If used on poured concrete, slight darkening or enhancement of the surface may occur

Directions for Use

• Allow new grout installations to cure for at least 72 hours before application. Make sure the surface is clean, dry, and free of waxes and coatings
• Surface temperature should be between 35°F and 90°F. Keep children and pets out of the area until foot traffic resumes
• Mask any surfaces not intended to be treated
• Liberally apply an even coat with a bristle paintbrush or paint roller
• Allow sealer to penetrate the surface for 15–20 minutes
• During this time, distribute excess sealer over the entire area to ensure even penetration
• Do not allow sealer to pool on the surface
• Thoroughly wipe the entire surface with a clean, dry cloth to completely remove all excess sealer from the surface
• DO NOT ALLOW EXCESS SEALER TO DRY ON THE SURFACE
• The sealer should be fully cured before water contacts the surface
• A complete cure is achieved in 72 hours. If there is a possibility of rain within the 72-hour cure time, cover the surface so it remains dry
• Clean tools used during application with water
• If resistance to oily stains is also desired, apply StoneTech Professional BulletProof Sealer after the Salt Water Resistant Sealer has fully cured

Available Sizes and Coverage

• Gallon: 315-475 sq ft
• 5 Gallon: 1,575-2,375 sq ft