Rubi Cyclone Leveling System CapsRubi's new leveling system is designed to avoid lippage during the laying of ceramic tile in both floor and wall tiles.
Features- Available in 100, 300 and 1200 quantities
- Works with Rubi Cyclone Bases as well as other threaded base leveling systems
- Recommended for tiles 12" x 12" and larger
- Especially recommended to improve finishes when working with large-format tiles
- Easy, fast and intuitive to use as no prior user experience is necessary
- No tools required - simply spin the screw cap into place and hand tighten
- Spacer bases fit below tiles and then the cap is screwed on
- Guaranteed flatness and regularity of the laying surface
- Recommended for tiles thickness from 3 - 18 mm (1/8" - <3/4")
- Simple impact removal system (by kicking or mallet) - Always in the direction of the grout joint
- Color-coded Spacer Bases are available in a variety of sizes (sold separately)
Technical Data- Use on most tile and stone from 3 - 18 mm (1/8" - <3/4") thick
- Minimum joint size: 1/32" (1mm)
- 100, 300, or 1200 caps per bag
How to use- STEP 1: Place spacer bases under tile once thinset has been applied
- STEP 2: Apply Cap. The cap will align with the top of the base allowing for easy threading
- STEP 3: Spin cap onto base and once the cap makes contact with the tile, turn the cap until the adjacent tiles are level, no need to over-tighten
- STEP 4: After thinset has cured break off caps and bases. It’s important to break the cyclone caps by kicking them or hitting with a rubber mallet, in the direction of the grout joint
- STEP 5: Remove the broken bases from caps by unscrewing them (caps are reusable and will last multiple jobs with proper installation and removal)
|
