Laticrete Prime-N-Bond Adhesive Primer

Laticrete Prime-N-Bond Adhesive Primer

Laticrete's Prime-N-Bond enhances mortar adhesion to smooth, non-absorptive substrates that have difficulty forming a bond to the mortar before installing the tile. This versatile primer is ready to use and bonds to a wide range of substrates.

Features

• Single coat application can be applied with a roller or a brush
• One component product does not require mixing
• Formulated with aggregate to enhance the mechanical bond between the mortar and the substrate
• It also improves the bonding of self-leveling underlayments
• Available in 1-gallon pails or 3-1/2 gallon buckets
• Low VOC, low odor primer is ideal for interior or occupied areas
• Should be stored in original packaging and used within 2 years of the date manufactured - do not allow to freeze
• Click here for suitable substrates

Common Questions

How long does it take for the prime N bond to dry?

Allow PRIME-N-BOND to dry before applying a polymer-modified mortar. The minimum drying time is 15 – 60 minutes, depending on the substrate and environmental conditions. When used as a primer for self-leveling products (e.g., NXT LEVEL), allow 2 – 5 hours for PRIME-N-BOND to dry before self-leveling products are poured.

What is the difference between primer and bonding agent?

Primer — hydrophilic monomer used to wet and penetrate the tooth surface. Self-cured bonding agent — bonding agent with a catalyst that allows self-curing without light activation.