• Home
  • S-310AB-NC-08 Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B

S-310AB-NC-08 Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B

(0) No Reviews yet
SKU: S-310AB-NC-08

Product Details

Product Details

Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B, S-310AB-NC-08, 2 x 1/2 liter

Two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. Maintains its non-sag consistency at high temperatures up to 95°F (35°C).


  • Best speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation
  • Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins
  • LATAPOXY 310 Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations
  • Permanent; it will not fail or deteriorate over time and is ICC and IBC approved
  • 1 liter - 2 parts - 2 x 1/2 liter
  • Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)

  • Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior and exterior applications
  • Adhesive for bonding masonry, precast concrete and stone panels
  • Ideal for fireplace surrounds, elevators and stair risers
  • Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting
  • Adhesive for fabricating granite, marble and other stone
  • Approved by TCNA for Interior applications method W215 and W260


  • Fast Permanent Bond-45 minutes to 1 hour set time
  • Easy to Use-1:1 mixing ratio by volume
  • Non-Staining-ideal for white and light colored?marbles, other stones and tiles
  • Withstands shock and vibration
  • Durable Permanent Bond-will not deteriorate over time
  • Safe-no solvents
  • Non-Sag-when applied up to 1" (25 mm) thick
  • Approved by the following building code bodies for exterior installations: ICC and IBC

Interior Substrates

  • Concrete
  • Concrete masonry units (CMU)
  • Brick/masonry
  • Exterior glue plywood
  • Consult cement backer board manufacturer for specific installation recommendations
  • Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials

Exterior Substrates

  • Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications
  • There is a maximum height restriction of 30 ft (9.1 m)
  • For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242

Concrete Application

  • Must be minimum 6" (150 mm) thick reinforced
  • Must be minimum 3500 psi (24 MPa)
  • Must be minimum 28 days old prior to installation
  • CMU
  • Double wythe walls only

Ratings & Reviews

No reviews available

Be the first to Write a Review