7897 Husqvarna Superlok Glass Plus Diamond Blade
Husqvarna Superlok Glass+ Diamond Blade
Enjoy 10% Off With The Purchase Of This 10 inch Blade During Our 10 Off 10 Monthly Special! Was $68.85, Now Only $61.97!
The Husqvarna Superlok Glass+ is a specialized diamond blade designed specifically for cutting glass tile.
- Premium diamond blade for fast, chip-free cutting through glass tile
- Finer diamond grit and bond formulation for precision glass tile cutting
- These blades are designed for wet cutting only
- Rim Height 7mm
- 6" Blade has a 5/8" Arbor, 10,185 Max RPM and a .060" Kerf
- 7" Blade has a 5/8" Arbor, 8,730 Max RPM and a .065" Kerf
- 8" Blade has a 5/8" Arbor, 7,640 Max RPM and a .065" Kerf
- 10" Blade has a 5/8" Arbor, 6,115 Max RPM and a .085" Kerf
|Hard Granite||Not Recommended|
Ratings & Reviews
Great chip free glass cutting blade
by ibbrian -
There are alot of choices for glass cutting blades out there. I have cut all kinds of stone, ceramic, and porcelin, but not glass tile. All the other comments I read about this blade greatly influenced my decision. So, I'm giving back my experience. The blade cut beautifully, little to no chipping. I even accidently cut into some aluminum that was in this accent piece I was installing and didn't seam to affect the blade at all. Very durable. Just remember to go slow and dress the blade about every 10-12 cuts. I would buy again. Thanks.
Glass cutting blade
by Buena Vista Man -
Good blade only critic i have is that it sometimes gets stuck, other than that i like the clean cut.
Best glass blade I have ever used
by Chip -
Cuts without chipping
Worked Great on 2" Villi Tiles
by Trying to Upgrade -
Worked really well to get the 2" Villi colored glass tiles cut smooth and accurately.
The best glass blade I've purchased. Cuts great on one condition. Blade most be dressed constantly. Buy plenty of dressing stones.
Excellent Glass Cutting
I have been using one of these blades for 2 1/2 years making a few hundred cuts on glass. I have yet to need to dress the blade as it continues to cut through glass like butter. Slow cuts with plenty of coolant still producing smooth edges. My material is glass bottles.