Husqvarna GM3000 Hiperfloor Grouting System

1 Review
SKU: 529750906
Contractor pricing

Product Details

Product Details

Husqvarna HiPERFLOOR GM 3000 Concrete Hole Filler

Use GM 3000 surface preparation and re-grouting solution to fill small pin holes in concrete floors before polishing the surface.


  • Latex-based bonding additive for concrete pore filling and re-grouting applications
  • Fill and patch small holes and air pockets in concrete floors before polishing

Husqvarna GM3000 Benefits

  • Fills small pin holes in concrete
  • Enhances the final clarity and shine of polished concrete floors
  • Improves the overall cleanliness of the finished concrete floor by eliminating tiny holes and voids where bacteria can grow
  • Eco-friendly
  • VOC compliant
  • Ready to use - no mixing or dilution required

GM3000 Application

A pump sprayer and fine bristled broom are required for application

  • Step 1 - Spray a small coat of water onto the floor (do NOT allow water to pool or form puddles) - water helps facilitate product absorption into the concrete
  • Step 2 - While the floor is damp, spray a liberal coat of GM3000 onto the floor roughly 10 - 15 ft. ahead of the concrete grinder
  • Step 3 - Brush the damp concrete floor with a bristled broom to remove any dust or debris from the pin holes and pores
  • Step 4 - Grind the wet area using 120 grit diamond pads; GM3000 will mix with dust from the floor to create a slurry - this slurry will work its way into the small pin holes in the floor
  • Step 5 - Sweep the concrete floor with the fine bristled broom to remove excess slurry from the floor
  • Step 6 - Apply concrete densifier and distribute evenly across the floor using a micro-fiber mop; let densifier sit for 4-8 hours

Approximate Coverage

  • 5 gallons provides 1,000 - 1,500 sq. ft. of coverage (about 250 sq. ft. per gallon), depending on the porosity of the concrete

GM3000 Grouting System Shelf Life

  • Unopened containers have a 3 year shelf life from the date of manufacture
  • GM3000 should be stored at room temperature (about 70°F)
  • Once opened, do not allow any dirt, water, or other contaminates to accumulate inside the bottle

How to Clean Application Equipment

  • Use water to clean application gear if GM3000 has not already dried
  • Use xylene or other approved solvent to clean equipment if GM3000 has already dried
Questions & Answers
No questions available

Be the first to Write a question

Ratings & Reviews

1 review

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
11/16/2016 11:56 am

Works as advertised

by Concrete Creations

Great product, works exactly as advertised. You can definitely see a big difference in final shine compared to other rooms where GM3000 was not used to prep the floor first. We purchased based on the average consumption rate of 1,500/sq.ft. but found we had a fair amount left over, but that's never a bad thing.