Diteq DiGard Concrete Hardener/Sealer

(0) No Reviews yet
SKU: 5480-5 gals
$342.30 to $342.30

Product Details

Product Details

Diteq DiGard Concrete Hardener/Sealer

DITEQ’s DI-GARD Concrete Hardener/Sealer is a semi-topical coating combining the benefits of a penetrating densifier with a topical abrasion resistant sealer. DiGard comes in a ready-to-use state — do not dilute or mix with other chemicals. When properly applied it will create an abrasion and chemical resistant protective barrier to enhance a polished concrete floor.


  • DI-GARD should be used after the concrete slab is polished and treated with the DI-HARD Densifier
  • The DI-GARD should be part of the final process because it will create a barrier coat to resist other chemicals from penetrating or bonding to the surface
  • The DI-GARD barrier coat should be reapplied as needed, typically every 3-5 years
  • Because it is a sealer, be certain to apply a test area in an inconspicuous place to be certain it doesn’t alter the appearance of the slab surface
  • Do not let product freeze


  • Be certain the surface is completely clean, dry and the concrete slab has remained over 38°F for over 72 hours
  • Charge a dry microfiber mop with a small amount of the DI-GARD product and use a misting sprayer to lightly mist just enough product for a very thin coat to be spread evenly with the microfiber mop
  • It should be applied at a coverage rate of about 1000 sq-ft per gallon
  • Let DI-GARD dry 1 hour between coats or for 2-4 hours before final burnishing or buffing the surface after the final coat
  • If any coat is applied too thick it will create ridges, streaks and/or visible staining, which will alter the appearance of the slab surface


  • 1 Gallon Bottle - Part No. 160943
  • 5 Gallon Bucket - Part No. 160944
Questions & Answers
No questions available

Be the first to Write a question

Ratings & Reviews

No reviews available

Be the first to Write a Review