Questions & Answers
7 questions
Electra Safe-Hete Water Heater, tile saw heater, bucket heater, tile contractor water heater

Electra Safe-Hete Water Heater

$69.09 to $72.03

What is the diameter of the heating ring on these bucket water heaters?

The circular heating plate is 5'' in diameter.

What is the height of the heating ring?

The height of the heating ring is 1''.

Can you regulate the temperature?

No, this tile saw water heater does not have a temperature control function.

Can you put it in the tile saw tray with out any damages accur?

The 5" water heater and will fit in most tile saw water trays with no damage occurring.

How hot will the water get?

This heater takes tap temperature water up to 90 degrees Fahrenheit in about 10 minutes. Once the water is at the desired temperature you may want to turn off the heater to ensure that the water does not get to hot. This unit can bring water to a boil or very close to it if left unattended for an extended period of time.

Can I put this heater in a Dewalt plastic water tray without melting the tray?

We do not recommend using a heater in the plastic pan as the pan may melt if water level drops. The heater may also get in the way of the cart. However some users put a 5 gallon bucket beside or underneath the pan, then put their heater and the pump in the bucket; you would need to pull the plug in the pan so water can run out into the bucket.

What is the length of the power cord?

The power cord length is 5-1/2 ft.