BJM SV750-115 Vortex Trash 3" Submersible Pump
The SV-Series pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solids of up to 90% of pump outlet diameter.
Features
- Recessed vortex impeller pumps for passing large solids found in sewage and industrial waste
- SV pumps are designed to pass mud, raw sewage, leaves, rags, wood chips and other solids without clogging
- Constructed with a cast iron volute and fully recessed impeller for pumping solids without clogging
- Rugged construction (no breakable plastic component) and light weight for portability
- Lip Seal and double mechanical seals
- Lower seal is silicon carbide/silicon carbide and upper seal is carbon/ceramic
- Built in high temperature automatic overload switch and class F motor insulation protects against motor failure due to overheating
- 1 HP, 115 Volts, single phase, 14 Full Load Amp
- Max Solids 2"
Technical Specifications
General data |
MAX. FLOW: GPM | 100 gpm |
MAX. HEAD: ft | 31 ft |
PUMP TYPE | Elect.Submersible, Non-Clog Vortex |
DISCHARGE CONNECTION | 3" NPT-M |
SHIPPING WEIGHT:lbs | 80 lbs |
MECHANICAL SEAL UPPER | Crb / Cer |
MECHANICAL SEAL LOWER | Sic / Sic |
MOTOR CASING | 304 SS |
PUMP VOLUTE | Cast Iron |
IMPELLER-MULTI VANE | Cast Iron |
LIPSEAL & O-RINGS | Buna-N |
ROTOR SHAFT | 304 SS |
EXTERNAL HARDWARE | 304 SS |
QTY. OIL IN SEAL CHAMBER | 9.3 U.S. fl. oz. |
Motor Data |
MOTOR RATING: HP | 1 |
MOTOR RPM | 3450 Rpm |
MOTOR INSULATION CLASS | F |
MOTOR SERVICE FACTOR | 1.1 |
VOLTAGE | 115V, 1ph-60Hz |
CURRENT Full Load Amps. | 14 Amps |
MOTOR PROTECTION | Thermal breaker & Amp. O.L. |
POWER CORD GAGE & LENGTH | 14/3, 33 ft |
MAXIMUM LIQUID TEMPERATURE | 104 F |