Aqua Mix Enrich'N'Seal Penetrating Sealer

(0) No Reviews yet
Aquamix
$36.51 to $59.16
QuantityPrice
1 - 5$36.51 - $59.16
6 +$35.80 - $58.00
Available in CT warehouse More Info
Available in UT warehouse More Info

Product Details

Product Details

Aqua Mix Enrich'N'Seal Penetrating Sealer

Features

  • A premium, no-sheen, enhanced-look, 100% polymer-solid, penetrating sealer formulated to darken, enrich, and highlight the character and beauty of unsealed natural stone
  • Use on unsealed, natural stone such as marble, granite, slate, limestone, flagstone, quartzite and sandstone
  • Expected wear is up to 15 years will vary depending on hardness and texture of surface, type of area, surface wear, frequency and type of maintenance products used, (Exterior applications may require more frequent re-applications. Weather conditions, harsh cleaning methods and high-alkaline, acidic or solvent-based cleaners will affect wear)
  • Coverage: Approximately 500 to 1,500 sq. ft per coat per gallon

Key Features

  • Rejuvenates the color and improves the appearance of worn and weathered stone
  • May also be used as a pre-grouting sealer
  • Allows moisture-vapor transmission
  • Effectively seals and darkens the color of grout joints
  • Effective for interior and exterior applications

Application

  • For new installations, sealer can be applied to a dry surface as soon as 72 hours after grouting
  • Surface must be clean, dry, and free of existing sealers or coatings
  • Apply using a sponge, brush, paint pad, cotton towel, or sprayer
  • Ready for surface traffic in 12 hours after final application
  • Keep dry for 12 hours. Achieves full cure in 48 hours
  • Some highly porous surfaces may require an additional coat after full cure
  • Clean applicator tools with mineral spirits after each use

Questions & Answers

4 questions

Is this product good for sealing a Terrazzo shower base?

This product will seal and darken Terazzo. Be sure the floor does not contain previously applied sealer or wax prior to use of Aqua Mix Enrich & Seal

How long until this dries?

This is ready for surface traffic after 12 hours, and is fully cured at about 48 hours.

can I use this on previous sealed slate?

No.  This product is designed to be used on unsealed natural stone.  The surface needs to be dry, clean and free of any waxes, sealers, or finishes.

Can Aqua Mix Enrich and Seal be used on glazed porcelain tile?

No; the Aqua Mix Enrich ‘N’ Seal is recommended for unsealed natural stone such as marble, granite, slate, limestone, travertine, quartzite, and sandstone.  The sealer cannot penetrate the Glazed porcelain.

Ratings & Reviews

No reviews available

Be the first to Write a Review