9200-0001-2 Laticrete Blue 92 Anti-Fracture Membrane Full Kit
$74346 USD
Unit price
/
Unavailable
Shipping calculated at checkout.
Brand: Laticrete
| SKU: 9200-0001-2
| MPN:
Shipping & Delivery
Shipping & Delivery
- $13.95 Flat Rate shipping for orders under $500 (Other options at checkout)
- Same-day shipping cut-off time for ground orders for CD stock items is 3:00 PM ET
- Same-day shipping cut-off time for expedited orders for CD stock items is 12:00 PM ET
- Shipping time is calculated by business days. Weekends do not count.
- For Freight Items See Policy Here
Laticrete Blue 92 Anti-Fracture Membrane Full Kit
A two-part system consists of liquid rubber and reinforcing fabric. When cured, it forms a highly flexible membrane. While the thin-bed method of tile installation provides many advantages, this method can be affected by problems with shrinkage cracking in concrete and other substrates. Cracks can telegraph through the tile and/or grout joints. To reduce or eliminate cracks in tile work, a flexible membrane should be applied to the cracked substrate prior to the installation of ceramic tile, marble, and stone.
Features
- Full Unit Kit includes: 5 US gallon (19 l) pail liquid, 1–roll reinforcing fabric: 38" (97 cm) wide, 95 ft (29 m) long, 1–roll reinforcing fabric: 6" (15 cm) wide, 75 ft (23 m) long
- Reduces crack transmission in ceramic tile, thin brick, marble, and stone installed using the thin-set method. It is also ideal for use under cement-based or resin Terrazzo
- Inhibits the growth of stain-causing mold and mildew with Microban antimicrobial protection
- Thin adds no appreciable thickness to floor construction; install tile with LATICRETE Polymer Fortified Thin-Set Mortar directly to the cured membrane
- “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Easy to Apply goes on quickly with paint brush or roller; no mixing or special equipment required
- Fast Cure dries in a few hours to receive finished surfacing
- Easy Cleanup cleans with water while fresh
- Safe, no solvents or harsh fumes, non-flammable
Uses
- For interior or exterior use on floors and walls, whenever hairline cracking or “spiderwebbing” occurs in the substrate
- For use over shrinkage and other non-structural cracks up to 1/8" (3 mm)
- Typical applications are over concrete slabs (suspended or on grade) in malls, lobbies, and residential applications under ceramic tile, marble, and stone
- Use to cover joints in plywood underlayments, cement backer boards, and concrete masonry on floors and walls
- Also, use over concrete floors and underlayments with radiant heating systems
Coverage
- Approximately 300 sq ft. (28 sq m) at 20 mil thickness per full unit
- Approximately 75 linear ft. (23 linear m) per crack suppression kit