13016 Maxxon Gyp-Fix EZ Patch & Skim Coat Bag, 25 lb.Specially formulated, polymer modified, gypsum-based, high-strength trowel-able underlayment. For smoothing surfaces, and filling cracks, holes and depressions in gypsum and concrete subfloors Features- Mixes and applies easily
- Can be feathered out to produce a smooth, even surface
- Fast Drying
- For the repair of old, weak, or dusty gypsum prime with Maxxon Fortify Primer.
- TOOLS NEEDED: Mixing Pail, volume measuring tool, high-speed mixing drill (850 rpm), stainless steel spatula, trowel.
- All subfloors must be structurally sound, broom cleaned and contaminant free
- All subfloors must be dry and a minimum of 50 °F (10 °C).
- Adding cement to water, begin with 4.0 qts (3.8L) of water per 25 lb bag of Gyp-Fix EZ. For desired consistency, increase total water volume up to 4.4 qts (4.1 L). For smaller quantities, mix cement into water beginning with a 3:1 cement-to-water ratio by volume. Increase water volume up to 10% as desired. Depending on amount, mix until lump free with drill or a stainless-steel spatula.
- Only mix the amount that can be applied within 20 minutes
- Dry time varies based on building conditions and depth of the applied material. Gyp-Fix EZ is typically ready for foot traffic in 40 minutes for skim coat, and when applied at ¼” ready for floor coverings in about 12 hours. Deeper areas will require longer dry times.
- Maxxon Gyp-Crete family of products Standing the test of time since 1972, Gyp-Crete makes for safer, quieter living, and has become a standard in apartments, condominiums, townhomes, hotels and motels nationwide and abroad
|
