Tile Saws & Stone Saws 
Tile & Stone Diamond Blades 
Tile Leveling Systems 
Tile Cutters & Nippers 
Thin Panel Tools 
Waterproof/Uncoupling Membranes 
Shower Installation Products 
Grouting Tools 
Knee Pads 
Mixing Drills & Paddles 
More Tile & Stone Tools 
Floor Heat 
Diamond Hole Saws & Core Bits 
Polishing & Profiling Equipment 
Spacers & Wedges 
Jamb Saws & Toe Kick Saws 
Layout & Marking Tools 
Trowels 
Tile & Stone Maintenance 
Tile Removal Equipment 
Tile Adhesive, Mortar & Grout 
Kitchen Sinks 
Concrete & Mortar Mixers 
Compaction Equipment 
Masonry Saws 
Walk-Behind Concrete Saws 
Cut-Off Saws 
Diamond Blades 
Core Drill Equipment 
Diamond Core Bits 
More Concrete & Masonry Tools 
Concrete Vibrators 
Surface Preparation 
Tooling for Surface Preparation 
Power & Manual Screeds 
Cup Wheels 
Concrete Pumps & Grout Pumps 
Scarifiers & Scabblers 
Power Trowels 
Rebar Cutters & Benders 
Decorative Concrete Coatings 
Demolition Hammers & Drills 
Material Handling 
Drainage Solutions 
Water Pumps 
Lasers & Distance Measurers 
Air Filtration 
Dust Collection 
Levels 
Quik Drive 
Generators 
Accessories 
Safety Equipment 
Abrasives 
Wood Adhesives 160041 Replacement Water Pan for MK-370EXP Tile Saw
New
Questions & Answers (12)
Does this MK 160041 water pan come with a water plug?
Anonymous
The MK 160041 water pan does not have a drain hole and does not require a drain plug.
I have a Kobalt saw that I dropped and broke the pan. Wondering if this pan will fit.
Er
These pans are designed for the specific saws for the manufacturer. I would not recommend trying to fit an MK pan on a Kobalt saw.
Why no drain, can I drill hole in pan and install my own plug without damaging the pan?
James Douglass
This replacement MK water pan does not have a drain hole nor drain plug, but you can drill a hole at your own discretion.
I have an old MK 377 tile saw with 15x25 inches pan. Is this going to fit to it?
Thomas
The replacement water pan part number for the MK-377 is 155791-MK. If you have the MK-377EXP Tile Saw, the replacement water pan part number is 160041, per MK Customer Service.
will this pan fit a MK101 saw?
AnonymouChucks
Please provide the serial number on your saw so we can confirm the correct part number.
You can reach us directly at 1-800-709-0002 for faster results!
Will this fit a Chicago tile saw?
Marc
This pan is to be used with the MK-370EXP saw. We would not recommend this pan to be used with a different manufacturers saw.
I have an MG-125DS-2 what pan will work? I know this is an older model and I don’t need an access opening for hose and wire. I rerouted through frame. I just want the frame to fit.
John
To get the exact part number for the pan that will fit your saw. Please contact MK directly at 800-421-5830 they will give you the part number and then we can get it ordered for you.
I need a replacement water pan with dimensions of 16.5" x 24.25" x 3.5"
Ramon Davila
If you have a part number for the pan that fits your saw we can get it ordered. Most water pans are saw specific.
What does exp mean I have a 370 my will this pan fit
Betty
The EXP is a different version of the MK-370 saw and this pan will not fit. The pan linked below will work for the MK-370.
https://www.contractorsdirect.com/MK-270-370-470-Repl-Pan
The pan I need is 18.5 x 34 x 3. Will this fit?
Bill Lekas
This pan will not fit the dimensions of this pan are31-1/4" L (33" W/ handles) x 18-1/4" W x 4" H
Does this fix The MK 270 model
Paul
This pan will only fit the model MK370EXP
I have a Husky thp901 do you have a pan that will fit it?
Alex Picard
It would be best to check with the manufacturer to confirm the pan for your saw as we do not deal in husky brand products
Ratings & Reviews
1 review
Tile water saw water pan
by Jerry A.
Could not find make of my tile saw but knew it came from Harbor Freight. Took measurement of old pan and use it for a reference. Pan is heavy plastic which I like and it will work on my saw. Just wish it had a drain hole but, I can take care that.