Alpha Tools ESC-150 6" Electric Stone Cutter Alpha introduces a new electric stone cutter, called the ESC-150, which is equipped with a powerful motor capable of cutting 1-1/4” (3cm) stone slabs in one pass. It is capable of miter cutting of 1-1/4” (3cm) materials with ease so that any stone fabricator can use it when miter cuts are required, without the time-consuming setup. The flexibility of the hose helps reduce operator fatigue and improves the operation. The Alpha ESC-150 has a built-in dust gate, making it dustless when connected to a HEPA vacuum. It can utilize a variety of consumables, including the Alpha Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods, and 1/8” fiberglass rods. A Libero 5” blade is recommended for marble applications since most marble slabs are 3/4” (2cm) thick or less.
Features- Powerful motor for use on granite, quartz surfaces, marble, limestone, concrete, and sintered/porcelain slabs
- Capable of miter cuts 1-1/4" (3 cm) material with ease
- Kink-free water hose for easy maneuverability and reducing operator fatigue
- Great for sink-hole cutting, groove cutting/rodding
- Comes with a built-in dust gate for dustless cutting when connected to a HEPA vacuum
- Blades sold separately
What's Included?- Alpha Tools ESC-150 6" Electric Stone Cutter
- Dust Cover
- Ground Fault Circuit Interrupter
- Easy On-Easy Off Sleeve
- Water Hose (15ft/4.5m)
- Water quick coupler with shut-off valve
- Hex wrench
- Additional Hardware
- Operator's Manual
| Alpha ESC-150 6" Stone Cutter Specifications | | Power | 11.2 amps (1,200 W) | | Voltage | 110V/220V | | No Load Speed | 10,000 RPM | | Arbor | 7/8 in | | Blade Capacity | 6 in | | Max Cutting Depth | 2" (50.88 mm) | | Weight | 11.30 lbs. |
|
