5987 Laticrete Strata Heat 120V Floor Heating Wire

SKU: 5987
Manufacturer: Laticrete
$ 100.52 to $ 428.44


$100.52 to $428.44


Please select options before adding to cart


Laticrete Strata Heat 120V Wire

The very luxurious Strata Heat wire by Laticrete can be used on many different floor coverings for your comfort


  • Component of the Laticrete system lifetime warranty
  • Different spacing of wire allows for variable heat output that can be spread out of put closer together

Please see conversion chart for cable in square feet below

Suitable Substrates

  • Interior Horizontal Surfaces Only
  • Hydro Ban Board
  • Concrete
  • Mortar Beds
  • Exterior Glue Plywood
  • Existing Ceramic Tile & Stone
  • Cement Terrazzo
  • Cement Backer Board


  • Interior floor installations only
  • Adhesives/mastic's, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproofing membranes

Floor Heating Spacing

Coverage varies based on the chosen spacing pattern of the cable.

  • Standard Coverage - 17 watts per sq ft. with 3/2/3 pillar spacing on uncoupling systems

Item NumberCable Length
Uncoupling Systems
3-2-3 pegs
Uncoupling Systems
3 pegs
Uncoupling Systems
4 pegs
Loose Laid Cable
2in space
Loose Laid Cable
4in space
Loose Laid Cable
6in space
0802-0017-2Coverage17 ft4 sq ft5 sq ft7 sq ft3 sq ft4 sq ft6 sq ft
0802-0034-2Coverage34 ft8.5 sq ft10 sq ft13 sq ft6 sq ft8 sq ft11 sq ft
0802-0050-2Coverage50 ft12.5 sq ft15 sq ft20 sq ft8 sq ft12 sq ft17 sq ft
0802-0067-2Coverage67 ft16.5 sq ft20 sq ft27 sq ft11 sq ft17 sq ft22 sq ft
0802-0084-2Coverage84 ft21 sq ft25 sq ft33 sq ft14 sq ft21 sq ft28 sq ft
0802-0100-2Coverage100 ft25 sq ft30 sq ft40 sq ft17 sq ft25 sq ft33 sq ft
0802-0133-2Coverage133 ft33.5 sq ft40 sq ft53 sq ft22 sq ft33 sq ft44 sq ft
0802-0166-2Coverage166 ft41.5 sq ft50 sq ft67 sq ft28 sq ft42 sq ft55 sq ft
0802-0200-2Coverage200 ft50 sq ft60 sq ft80 sq ft33 sq ft50 sq ft66 sq ft
0802-0233-2Coverage233 ft58.5 sq ft70 sq ft93 sq ft39 sq ft58 sq ft77 sq ft
0802-0266-2Coverage266 ft66.5 sq ft80 sq ft107 sq ft44 sq ft66 sq ft88 sq ft
0802-0299-2Coverage299 ft75 sq ft90 sq ft120 sq ft50 sq ft75 sq ft100 sq ft
0802-0332-2Coverage332 ft83.5 sq ft100 sq ft133 sq ft55 sq ft83 sq ft111 sq ft
0802-0365-2Coverage365 ft91.5 sq ft110 sq ft147 sq ft61 sq ft91 sq ft122 sq ft
0802-0398-2Coverage398 ft100 sq ft120 sq ft160 sq ft66 sq ft99 sq ft133 sq ft

Questions & Answers (7)

2/7/2018 3:33:09 pm

How many cables can I attach per thermostat?

You can attach multiple Laticrete Strata Heat cables without exceeding 15amps. For cases in which may exceed 15amp a relay must be used. Please contact an electrician for all electrical connections questions and issues.

2/27/2018 6:34:59 pm

Just double checking...heating 27sqft, using 2 peg spacing 133ft wire is correct...

Yes this is correct. 133 Linear feet of Strataheat cable will cover 27sq ft on a 2 peg strataheat mat

3/10/2018 3:28:18 pm

Can you run this cable in a shower floor and shower bench as long as it is properly waterproofed above the cable?

You can safely install this product in wet areas (i.e. showers, steam rooms, etc.) with proper waterproofing methods.

Please refer to the installation manual for more detailed information.

5/18/2018 3:19:28 pm

If the heat cord rows are 3 pegs apart, will this meet Laticrete’s warranty and is this an effective way to use this product?

Typical peg spacing is 2, 2/3/2, or 3. The peg spacing determines how effectively the gets transfer through the floor.

Refer to the installation guide for more information.

9/26/2019 4:00:46 pm

If your wire ends up being too long can it be cut and sealed in the field?

You should not cut the floor heating wire for any reason. Please purchase the most appropriate cable length.

2/2/2020 12:55:20 pm

Can I use the heating wire under carpet?

Do not use floor heating cables under carpet. This heating wire, which works with an uncoupling membrane or spacing strips, is designed to go underneath tile installed with mortar.

6/26/2020 9:51:06 am

What size service wire & breaker do i need for 66sf , 220v
of heating for a
tile floor?

First you will need to purchase SKU 5988, which is the 240V Strata Heat Cable.  If you are using 3-2-3 peg spacing for a 66 sq ft. area you will need the 266 linear ft cable.  As far as the breaker requirements, please consult your local electrical codes or speak with a local licensed electrician.

Ratings & Reviews

No reviews available

Be the first to Write a Review