Spin Doctor 1/8" Black Threaded Spacers/Posts

Spin Doctor Tile Leveling System, 1/8" Black Threaded Posts/Spacers

The Spin Doctor tile leveling system is a new tile leveling system that does not require any tools or pliers for installation. The free-spinning leveling cap spins down the spacer screw with minimal effort, allowing the installer to secure the cap and level the tile with only one hand.

Features

• Choose between 100 piece or 250 piece boxes of 1/8" threaded posts/spacers
• Use with tile up to 3/4" thick
• Provides 1/8" grout joint - for a thinner grout joint, use the 1/16" Spin Doctor posts

How to Install Tile with the RTC Spin Doctor Tile Leveling System

• Lay the tile in the desired position
• Place the spin doctor tile leveling system threaded spacers right underneath each exposed edge of tile
• Ensure that direct contact is made between the spacer and the tile and that no mortar exists between the two
• Put the free-spinning cap on the top of the threaded spacer post and spin the cap down to the tile surface
• Continue spinning cap until all adjacent tile surfaces are flat and level
• One tile adhesive has cured, use a rubbet mallet to remove the cap and threaded post from the installed tile
• Caps can be cleaned and reused