74 Products

View by:

74 Products

966916101 Husqvarna DMS 180 Core Drill Rig

$1,063.63
  • Drill holes up to 6" (153mm) in diameter.
  • 1,700 watts/15 amp motor with an 800 rpm single-speed gearbox.
  • For angle drilling.
  • 8221 Husqvarna Shaft Couplings

    $50.00 to $85.05
  • Shaft couplings permit positive thread-to-thread adaptation from machine to core bit.
  • Add to cart

    8222 Husqvarna 12" Shaft Extensions

    $48.36 to $93.00
  • Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity.
  • Male 5/8"-11 to Female 5/8"-11, Length 12".
  • Male 1-1/4"-7 to Female 1-1/4"-7, Length 12".
  • Add to cart

    8288 Kor-It K-160 KOR-Mobile Trailer System

    $15,900.00 to $24,924.90
  • 17.5 hp gasoline powered drill head with electric start, 16" bit capacity and 24" travel.
  • Variable drill head positioning system.
  • 200 gals water tank and 12 VDC water pump.
  • Free shipping
  • Add to cart

    8240 Husqvarna 2" Spacer Blocks

    $117.41 to $151.72
  • 2" spacer block for DS 700 and DS 800.
  • Allows rigs to use 16" bits.
  • Add to cart

    8291 Kor-It K-201 Electric & Hydraulic Core Drill

    $2,494.90 to $8,419.90
  • Hydraulic or electric motors, 12" to 48" diameter capacity.
  • 36" carriage travel.
  • Electronic and Hydraulic auto-feed available.
  • Free shipping
  • Add to cart

    8292 Kor-It 12" K-102 System

    $2,645.99 to $4,656.90
  • 3.5 hp electric motor with 2-Speed Gearbox 450/900 Rpm
  • Up to 12-inch diameter bit capacity, 8" std., 22" hole depth
  • Oil-less vacuum pump, vacuum filter, hose and quick connections.
  • Free shipping
  • Add to cart

    8293 Kor-It K-1700 Flexible Position Receiver Mounted Drilling System

    $8,899.90 to $10,219.90
  • Positioning arm swings 180 degrees 
  • Drill head extends approximately 36" beyond side of vehicle
  • Variable RPM: 300 to 1500 bit Rpm.
  • 16" to 24" diameter capacity, 8" auger available.
  • Free shipping.
  • Add to cart

    8249 Husqvarna DR 150 Vacuum Assembly

    $218.65 to $618.48
  • Heavy-duty, pliable rubber gasket
  • Quiet, 4 Amp diaphragm pump
  • Mount bracket holds vacuum pump to machine base
  • For combo bases
  • Add to cart

    93678 Core Bore Weka DK 16 Handheld Core Drill

    $1,937.20
  • 20 Amp, 110 volt motor.
  • Slow start for safer operation.
  • Advanced electronic overload warning and protection.
  • 3-speed 580/1200/2520 Rpm.
  • 01741 Core Bore Weka DK22 Wet Core Drill Motor

    $2,457.84
  • 23 Amp. 110 Volts Motor.
  • 3 Speed 300/640/960 Rpm.
  • Water attachment.
  • 1.250-7 threaded spindle.
  • 47828 Core Bore Weka DK 22S Wet Core Drill Motor

    $2,457.84
  • 23 Amp, 110 Volts motor.
  • 3 Speed 420/880/1300 Rpm.
  • Water attachment
  • 1.250-7 threaded spindle
  • 8295 Kor-It K-401 & K-416 Mobile Core Drill Machines

    $4,709.90 to $6,589.90
  • Variable Rpm: 300 to 1100 bit Rpm.
  • Drill anywhere with gasoline motors (6.5 & 15 hp).
  • 6" to"16" diameter core bit capacity.
  • weight: 285 lbs. to 300 lbs.
  • Free shipping.
  • Add to cart

    8102 Core Bore Complete M-1 Anchor Drill Rigs

    $2,193.15 to $3,277.59
  • 1" to 10" bit capacity (14" with a spacer block)
  • Dual switch/outlet control panel & amp meter
  • 6" wheels for better mobility
  • Add to cart

    8236 MK Diamond Vacuum Pumps

    $657.00 to $741.75
  • Oil-less operating 1/8 hp vacuum pumps for Manta core rigs.
  • Vacuum pump for Manta III combination drill stands.
  • Vacuum pump with handle & iso-vibe foot pads, fits any combination drill stand.
  • Add to cart

    8238 Husqvarna DS 800 Stand Less Motors

    $1,216.47 to $1,793.00
  • Drill holes up to 16" (extra spacer required).
  • 1" to 14" bit capacity standard. Spacers available for larger bit sizes.
  • 42" long, precision ground and plated 2-7/8" square column reduces flex 
  • Add to cart

    8108 Core Bore M-6 Drill Rig Stand

    $2,850.25
  • 2:1 gear reduction makes easy lifting of larger bits.
  • 18" bit capacity with a standard pillow block.
  • Optional 4" x 6" steel tube spacers for drilling up to 72" diameter holes.
  • 8107 Core Bore M-5 Combination Rig With Vacuum Pump

    $2,775.36 to $3,979.08
  • 12" bit capacity (up to 36" with spacers or pillow block)
  • Easy quick disconnect motor mount
  • Angle drilling capability up to 45 degrees
  • Add to cart

    8105 Core Bore M-4 Complete Core Drill Rig

    $2,126.60 to $3,057.32
  • Weighs only 35 pounds
  • 6" bit capacity (3" hand-held)
  • Converts to hand held drill motor in seconds
  • Combination stand quickly angles to 45 degrees
  • Add to cart

    544969201 Husqvarna Truck Mount For Gyro Stand

    $1,305.73
  • Mount support for Gyro stand.
  • Does not include the Gyro stand item 965157822
  • K812 Kor-It Anchor & Vacuum Base, Angle Core Drill & Stand

    $2,775.90 to $4,769.90
  • Heavy duty combination anchor/vacuum base.
  • 2 Speed 460/900 Rpm.
  • 2,500 Watts, 3.5 hp.
  • 12" bit capacity.
  • Free shipping.
  • Add to cart

    8289 Kor-It K-150 KOR-Mobile Trailer System

    $12,500.00 to $17,628.00
  • 200 gals water tank and 12 VDC water pump
  • 5 ft. by 8 ft. steel construction trailer, equipped with electric brakes and pre-wired for tail lights.
  • Free shipping
  • Add to cart

    965173601 Husqvarna DMS 240 Core Drill Rig

    $1,672.87
  • The stand can be tilted from 0 to 45 degrees for angle drilling.
  • Perfect for drilling reinforced concrete, bricks and other building material for ventilation and plumbing channels, waste evacuation pipes, barriers and road signs.
  • 3508 Husqvarna DMS 280 Core Drill Rig

    $2,883.05 to $3,748.25
  • The stand can be tilted from 0 to 45 degrees for angle drilling.
  • Drill holes up to 10" (153mm) in diameter.
  • 24" drilling stroke.
  • Add to cart