31 Products

View by:

31 Products

HEX17CBDCLT Pearl 15" Hexplate W Carbide Hexpin Assembly Complete

$1,010.00
  • Super clutch will disengage if the Hexpin plate hits an obstruction.
  • Super clutch is self resetting, simply turn off buffer and restart, less downtime.
  • Safely prevents coupler breakage and buffer damage.
  • HEX1110B Pearl 11" Plate with 10 Blue Diamond Pins (Hard Bonded)

    $700.00
  • 11" Hexplates for 13" Buffers or 11" Single Head Floor Grinders.
  • Spring mounted pins to allow for uneven surfaces.
  • HEX1110G Pearl 11" Plate with 10 Green Diamond Pins (General Purpose)

    $641.00
  • 11" Hexplates for 13" Buffers or 11" Single Head Floor Grinders.
  • Spring mounted pins to allow for uneven surfaces.
  • 7775 Pearl #1 Carbide Hexpin Attachment

    $15.00 to $141.32
  • Replaceable four sided, abrasion resistant, carbide insert.
  • For scraping and removal of a variety of coatings and paints from concrete surfaces.
  • Add to cart

    6512 Pearl Diamond Hexpin® Attachment

    $45.39 to $61.60
  • Designed to be used for grinding and sanding concrete surfaces.
  • Choose from blue pin for Hard bonded for abrasive surfaces, coarse gold and green pin is for general purpose grinding.
  • Add to cart

    HEX1EZPAD-MFD Scrape and Grind Diamond Pad (sold individually)

    $82.80
  • NEW Pearl Scrape and Grind pads attachment scrapes away mastic, thinset, etc. and grinds the concrete at the same time.
  • Can easily be used with Hexpin® carbide plate (#HEX17CBD or #HEX17CBDCLT)
  • 7774 Pearl Hexplate Diamond Segmented Pads Attachment

    $6.26 to $156.39
  • Faster and more aggressive, hex pin diamond segmented pad attachment.
  • Can be used dry or wet on concrete surfaces 
  • Ideal for removing soft coatings & repairing, leveling, and grinding concrete.
  • Add to cart

    HEX17CBD4CLT Pearl 15" Hexplate With Clutch And Complete Hexpin Assembly

    $1,220.35
  • Equipped with a very aggressive #4 carbide chip hexpin
  • Super clutch will disengage if the Hexpin plate hits an obstruction to prevent coupler breakage and buffer damage
  • HEX4CHIP12 Pearl Carbide Very Aggressive Chip #4

    $196.32
  • 8 Sharp edges! Best used to remove thin paint and epoxy from concrete, but works well for other concrete surface removal applications.
  • So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.
  • HEX4CHIP Pearl Carbide Very Aggressive Chip #4

    $18.32
  • 8 Sharp edges! Best used to remove thin paint and epoxy from concrete, but works well for other concrete surface removal applications.
  • So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.
  • HEX1SLV Pearl Repl, Carbide Sleeve (each)

    $18.63
  • Replacement carbide sleeve.
  • Sold individually.
  • HEX1FTC Pearl TURBO-CUT™ HEXPIN® Attachment (complete)

    $34.57
  • 4-1/2" x 7/8". C16-Turbo-Cut™ disc.
  • Suited for light scarification of coated surfaces, removal of urethane and rubberized coatings, sealers and light rust from metal surfaces.
  • HEX4CARB Pearl Carbide holder with #4 chip and screw (complete)

    $48.74
  • 8 Sharp edges! Best used to remove thin paint and epoxy from concrete, but works well for other concrete surface removal applications.
  • So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.
  • HEX1EZPAD Pearl Hexpin Diamond EZ Pad (sold individually)

    $54.03
  • Excellent for Sanding, Light Grinding and Floor Preparation on Concrete and the spring mounted pins allow for uneven surfaces.
  • Fits the Hexpin® carbide plate (#HEX17CBD or#HEX17CBDCLT) and either 6 or 12 EZ pads can be used.
  • HEX1EZHLD Pearl Hexpin Carbide Holder with Diamond EZ Pad and Screw

    $68.20
  • Excellent for Sanding, Light Grinding and Floor Preparation on Concrete and the spring mounted pins allow for uneven surfaces.
  • Fits the Hexpin® carbide plate (#HEX17CBD or#HEX17CBDCLT) and either 6 or 12 EZ pads can be used.
  • HEX1EZPIN Pearl EZ Lock Pin (each)

    $1.53
  • Locks the Hexpin to the Hexplate.
  • FSP4516 Pearl 4-1/2" x 7/8". C16-Turbo-Cut™ Disc (each)

    $6.50
  • For coating removal where abrasive grains are more effective than customary scraping methods.
  • Light scarification of coated surfaces, removal of urethane and rubberized coatings, sealers, and light rust from metal surfaces.
  • CCD016P Pearl 8 Grit Double-Sided 16" Tungsten Carbide Sanding Disc

    $122.72
  • Perfect for removal of paint, epoxy, thin-set, mastic, carpet padding and a wide variety of concrete surfaces.
  • Ideal for use on Pearl’s Sanding Disc attachment and with any 17” floor buffer.
  • HEX1CLP Pearl Clutch Plate Repl, Part

    $17.50
  • Replacement Clutch Plate.
  • HEX4CRBH Carbide holder for #4 chip

    $29.19
  • So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.
  • Carbide chip sold separately.
  • HEX1SCRE Pearl Abrasive Hex Screw For #1 Hex Chip 3/16 Allen

    $0.52
  • Replacement screw for #1 chip, as well as plates and blocks.
  • 3/16 Allen.
  • HEX15811 Pearl Abrasive 5/8-11 Quick Change Pin

    $25.93
  • Hexpin attachment with 5/8-11 reverse thread for use with a variety of Quick Change Hexpin attachments.
  • HEX17FTCCLT Pearl 15" Hexplate with Clutch and 6 Turbo Cut Pins

    $804.98
  • Hexplate with clutch comes equipped with 6 carbide turbo cut pins
  • Super clutch is self resetting, simply turn off buffer and restart, less downtime
  • HEX1706CBDCLT 15" Hexplate w/ 6 - #4 Carbide Chips

    $583.70
  • Floor buffer attachment for grinding, sanding & coating removal
  • Superclutch provides safety & protection
  • Interchangeable accessories
  • Multi-purpose floor preparation