StoneTech Bulletproof Sealer

4 Reviews
Stone Tech
$177.00 to $715.00
Free shipping

Product Details

Product Details

StoneTech Bulletproof Sealer

Use on natural stone such as marble, granite, limestone, slate, and travertine.


Features

  • Maximum penetrating micro bond protection
  • Heavy duty protection against most stains
  • Makes cleaning stone easier
  • Preserves natural look
  • Water-based formula
  • Interior and exterior

Directions for Use

  • Allow new grout installations to cure for a minimum of 72 hours prior to application
  • Make sure surface is clean, and free of waxes and coatings
  • Sealer may be applied to damp surfaces 1 hour after standing water is removed
  • Surface temperature should be between 50°F and 80°F
  • Ensure that the area is well-ventilated during application and until the surface is dry
  • Mask any surfaces not intended to be treated
  • Apply sealer evenly and liberally using a paint pad, roller, brush or low-pressure sprayer
  • Allow sealer to penetrate the surface for 15–30 minutes
  • During this time, keep the surface wet with sealer, adding more sealer as needed
  • DO NOT ALLOW SEALER TO COMPLETELY DRY ON THE SURFACE
  • Remove excess sealer by wiping surface thoroughly with clean, dry towels
  • Should a sealer residue appear, rewet the impacted section of the surface with sealer
  • Agitate the surface with a white nylon scrubbing pad to loosen residue and wipe dry with a clean, absorbent towel
  • A full cure is achieved after 24–72 hours
  • Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved
  • Clean tools used during application with water

Available Sizes and Coverage

  • Pint: up to 112 sq ft
  • Quart: up to 225 sq ft
  • Gallon: up to 900 sq ft for a single coat application
  • Expected Wear: up to 5 years on interior surfaces and up to 3 years on exterior surfaces

Stone Tech-Laticrete Logo
Questions & Answers
1 questions

Will this add any shine? I have been removing years of build up from a blue stone floor and its grout. We are seeing a beautiful color under the green/brown stains, but it is much more matte. If this does not add shine, can I use this to seal, and then put something on top to add shine? Or do you have some thing that will do both jobs (sealing and glossing)?

This product is for sealing only, it will not add any shine. We have the Aqua Mix Seal & Finish sealer, which will seal and add a low sheen to the tile. The item number for this product is 020552-4.

Ratings & Reviews

4 reviews

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews
8/7/2015 12:02 pm

Tile Protection

by Jake

very good tile sealer. you do not have to use a sponge, I used a brush and though that it was better off that way, although you can't put as much on with that process. Still a great sealer and I use it on most of my jobs

8/7/2015 12:04 pm

Sealer

by Tim B

Always seal your grout! it is the best thing for it, to protect and for the peace of mind that your finish product will last for a while. I highly recommend this sealer

8/7/2015 12:57 pm

Love it!

by Ian A

Used this sealer after a bathroom job, the water just rolls right off of the sealed surface. this is one application every 5 years and you're good

8/7/2015 1:08 pm

Worth it

by Frank

easy to apply, works well and last long! that was my biggest problem was finding a sealer that lasts as long as this one can