Wacker Neuson PG3A 3" Centrifugal De-watering Pump

Centrifugal dewatering pumps are the value alternative for keeping jobsites dry. Wacker's PG dewatering pump series has been designed to handle the removal of relatively clean job-site water. With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.

Features and Benefits

  • Cast iron impeller and volute are wear resistant for long life and minimal service
  • Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity. Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
  • High strength lightweight diecast aluminum housing increases the years of trouble-free pump life.
  • A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.
  • Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters.

Technical Features

    Suction & discharge diameter 75 mm 3 in
    Length x width x height 515 x 405 x 460 mm 20 x 16 x 18 in
    Operating weight 31 kg 69 lb
    Shipping weight (including packaging) 34 kg 75 lb
    Shipping size 540 x 430 x 490 mm 21 x 17 x 19.5 in
    Max. head 30 m 98 ft
    Max. discharge 1.000 l/min 264 US gpm
    Max. suction lift 7,5 m 25 ft
    Solid size capacity 6,5 mm .25 in
    Engine Typeair-cooled, 4-cycle, single cylinder, gasoline engine Honda
    Displacement 163 cm3 9.9 in3
    Max. power output 4,1 kW 5.5 hp
    at 3.600 1/min 3,600 rpm
    Operating power 3,7 kW 5.0 hp
    at 3.600 1/min 3,600 rpm
    Fuel tank capacity 3,6 l 3.8 US qt
    Fuel consumption 1,8 l/h 1.9 US qt/h

Ratings & Reviews

Be the first to write a review