Quick-Pitch Universal Center Ring New and improved! The new Quick-Pitch Universal Center Ring now adapts the Standard Float Sticks to larger 6” round and square drain risers plus most other specialty shower drains. Just like it's predecessor, when riser thicknesses are more than 1/4 in. thick immediately under the drain grate, the ability to adjust the riser down lower than the standard Center Ring allows to be flush to the incoming floor tile is a necessity. Features- Equipped with both 2 inch and 3 inch snap-in inserts to match the threaded barrel portion of most drain risers
- It has 24 Quick-Pitch float stick attachment slots positioned every 15 degrees around the top of the ring
- For use with the Quick Pitch and Pre-Pitch shower installation kits
- Now a larger, 8-1/2 inch inside ring diameter accommodates up to 6 inch round and square drain risers and stands 1-3/8 in. tall
- It is recommended that Extra Float Stick Kits XFS-101.2 be used since the Standard Center Ring supplied in the Quick-Pitch Standard Kit QPK-101 will not be needed
How to use- 1. Select (A1) 3" or (A2) 2"
- 2. Snap proper adapter into (B) Universal Center Ring
- 3. Place Weep Protector
What's Included- 1 (A1) 3" Threaded Riser Adapter
- 1 (A2) 2" Threaded Riser Adapter
- 1 (B) Universal Center Ring
|
