Details

CS Unitec 20" Standard AirForce F4 Diamond Chain, CC 03-5080

AirFORCE F4™ Diamond chain optimized for pneumatic and hydraulic chainsawing.

  • General-purpose Diamond Chain.
  • 20" chain has 34 segments for 20" max. cutting depth, 19" square corners.
Cutting tips to improve chain life:
  • Use minimum of 20 PSI water pressure.
  • Always cut at full throttle slowly plunge into wall and push hard enough to cause the RPMs to drop by 25% to 30%.
  • Always apply steady feed force.
  • Slowly rock the bar and chain into the cut using Wallwalker® as a pry point.
  • Reduce arm motions hold saw close to body, using legs and body to apply feed force; always cut with saw between shoulders and knees, preferably at waist height.
  • If saw begins to drift off the intended cut line, pull out and restart cut.

Ratings & Reviews

Be the first to write a review