Norton Clipper CP514-350 14" Cut-Off Saw
Product Details
Product Details
Norton Clipper 14" High Speed Cut-Off Saw - CP514-350
Designed with the end-user in mind to cut a smooth and fast. This cut off saw is fully equipped to handle the everyday needs of any job site with unrelenting durability and reliability. Better balance, better performance, better saw!
Features
- An electronic sensor will indicate a low oil level and adjust the engine to idle to prevent engine damage
- Proprietary electromagnetic valve eliminates the standard choke and half throttle start
- The 3-step EASY start eliminates the hassle of a choke
- Simply turn the switch on, prime the engine, and push the decompression button, then pull the cord to start
- Patented twin-air inlets create an air pulsation keep the saw running cool and reduce debris being trapped in the filter
- 3-stage filter
- External rocker wheel vibrates the filter to help further release debris
- Easy Start System. NO chokes to set, four simple steps to start
- Higher performance air filtration system with filter shaker for longer life
- Better balance: the blade will not hit the ground when you pick the saw up
- Diamond Blades Sold Separately
What's Included?
- Norton Clipper CP514-350 Cut-Off Saw
- Hand Tools
- Spare Parts
- Operator's manual
Norton Clipper CP514-350 Cut-Off Saw Specifications | |
Blade Size | 14 in |
Power (Gas) | 5.4 hp / 4 kW |
Blade Shaft RPM | 4,500 |
Arbor | 3/4 in (20 mm) |
Max Depth of Cut | 5 in |
Fuel Capacity | 0.23 gals (0.9 L) |
Oil Capacity | 10.08 oz. (0.32 L) |
Weight | 23.15 lbs |
Questions & Answers
2 questions
2 questions
What type of fuel and oil should be used in this machine?
by Peter 11/3/2019 9:01:37 pm
The fuel mix must be formed from the following components:
Does this run on a gas and oil mixture or straight gas
by Ben b 7/25/2020 3:13:10 pm
Yes, this is a Single Cylinder 2 Cycle engine and requires a gas/oil mix. Please refer to the user manual provided with the machine for the manufacturers recommendation.