Tsurumi Pump HS Series Submersible Trash PumpsThe HS Series Submersible Trash Pumps are designed to pump water containing sand, solids and debris with minimal wear and clogging.
Features- Built-in shaft mounted agitator suspends solids
- Urethane Semi Vortex Impeller for maximum durability and pump performance
- Dual inside mechanical seal With SiC faces provides longest operational life
- Oil lifter provides lubrication of the seal faces
- V-Ring Seal design protects mechanical seal from abrasive particles
- Sold individually
- Limited 2-Year Warranty
HS2.4S- Manual Trash pumps in 2 inches discharge and 1/2 HP. Designed to pump water containing sand, solids and debris with minimal wear and clogging
- Cable length: 20 ft.
HSE2.4S- Automatic Trash pumps in 1/2 HP and 2 inches discharge with Automatic Water Level Sensor
- No control panel or float switches required. Performs like the non-automatic pump with no special float installation required
- Internal 60-second timer eliminates frequent on/off operation in rough water to extend motor life
- Automatic water level sensor completely molded in resin and covered by rubber case for protection against rough handling
- Cable length: 20 ft.
HSZ2.4S- Automatic trash pumps in 2 inches discharge with ball float switch
- Vertical discharge coupling available to order
- It can handle demanding tasks such as floodwater management, construction site dewatering, and industrial debris removal with ease
- Cable lenght: 20 ft.
HS3.75S- Manual Trash pumps in 3 inches discharge
- Cable length: 32 ft.
HS3.75SL- Manual trash pumps in 3 inches discharge
- Cable length: 32 ft.
HSZ3.75S- Automatic trash pumps in 3 inches discharge with ball float switch
- Vertical discharge coupling available to order
- Cable length: 32 ft.
HSZ3.75SL- Automatic trash pumps in 3 inches discharge with ball float switch
- Straight and angle 2-inch NPT Coupling available to order
- Cable length: 32 ft.
HSD2.55S- Manual trash pumps in 3 inches discharge
- Anti-wicking block prevents water incursion
- Built-in larger shaft mounted agitator suspends solids
- High chromium iron impeller
- Easy pump end disassembly by removing only 3 nuts
- Cable length: 32 ft.
|
Tsurumi Pump HS Series Submersible Trash Pumps | Model | Discharge Size | Motor Output | Diameter | Height | Max Solid Diameter | Weight | HS2.4S | 2" | 1/2 HP | 10-1/16" | 12-5/16" | 0.276" | 25 lbs. | HSE2.4S | 2" | 1/2 HP | 13-1/2" | 17-1/2" | 0.276" | 26 lbs. | HSZ2.4S | 2" | 1/2 HP | 13-1/2" | 15-1/8" | 0.276" | 30 lbs. | HS3.75S | 3" | 1 HP | 12-7/16" | 15-5/16" | 0.276" | 43 lbs. | HS3.75SL | 3" | 1 HP | 12-7/16" | 16-3/4" | 0.276" | 50 lbs. | HSZ3.75S | 3" | 1 HP | 13-1/2" | 17-1/2" | 0.276" | 50 lbs. | HSZ3.75SL | 3" | 1 HP | 15-3/4" | 19-7/8" | 0.236" | 50 lbs. | HSD2.55S | 2" | 3/4 HP | 10-3/8" | 15-3/8" | 0.393" | 39 lbs. |
|