Gemini Taurus 3 Dichroic Blade

Gemini Taurus 3 Dichroic Blade

Features

• Fine grit blade for omni-directional cutting in delicate materials, such as thin art glass with dichroic coating
• Used for cutting thin dichroic glass and iridized glass without flaking off the dichroic coating
• Note: Do not cut ceramic tile, 1/4" fused glass or thick materials in general

How to Use

• All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn
• Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure