Gemini Taurus 3 & Apollo Standard Blade Kit

Gemini Standard Diamond Blade Kit for Taurus 3 and Apollo

The standard blade is the perfect choice for cutting stained glass pattern and an all around multi-purpose cutting blade.

Features

• Original replacement blade fits the Gemini Tile Shaper, Taurus 2, and Taurus 3 and Apollo saws
• Omni-directional blade has the ability to cut at the same speed and kerf in any direction
• 360 degree diamond coating allows the blade to cut quickly while grinding the edge, leaving it smooth
• Comes with 2 orange grommets (part no.0485)
• Note: Do not use for ceramic tile, 3/8" fused glass pieces or thick material in general

How To Use

• All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials
• All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn
• Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life
• There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life at which you get maximum cutting speed for minimal pressure

Gemini Taurus 3 Standard Blade Specifications
Blade Shape	Round, 0.072" Diameter (Note 1/16" is 0.063" and 1 mm is 0.0394")
Material Thickness Capacity	3/8" 1/8" art glass, 1/4" soft wall tile
Grit	Aggressive
Average Blade Life	40-60 hours