PLS Pearl Leveling System 1/16" ClipsPLS Pearl Leveling System is an all-in-one lippage control plus spacer system. It makes setting tiles easy and profitable.
Features- Available in 250, 500 and 2000 quantities
- For use when installing wall and floor tiles
- For use on porcelain, ceramic and natural stone tiles
- Especially recommended to improve finishes when working with large-format tiles
- System of interlocking clips and re-usable wedges ensure your floor will be perfectly level from one tile to the next
- Creates a grout joint size of 1/16"
- Requires minimal effort to install and remove, plus speeds up installation time
- Can be installed by hand or with optional install tool
- Prevents the tile from moving during the installation and curing process
- Multi-polymer plastic provides greater tensile strength while remaining flexible to avoid breakage failures while tightening
- Each clip thickness is easily identified thanks to the range of different colors available (1/16" is a gray clip)
- Breaks evenly and clean at the base every time
- Simple impact removal system (by kicking or mallet) - Always in the direction of the grout joint
- Use on 1/8" to 1/2" thick tile
- Wedges sold separately
Technical Data- Use on 1/8" to 1/2" thick tile
- Minimum joint size: 1/16" (1,5mm)
- 250, 500, or 2000 bases per bag
How to use- STEP 1: Insert the clip under the first installed tile to achieve a consistent grout joint spacing
- STEP 2: Place the next tile on top of and against the clips of the previously installed tile
- STEP 3: Insert the wedge into the clip to secure, align and flatten the adjoining tile (your hand or the installation tool can be used to tighten the wedge into the clip)
- STEP 4: After thinset has cured, hit the clips (with or without wedge) with a rubber mallet, in the direction of the grout joint
- STEP 5: Separate the broken clips from the wedges (wedges are reusable and will last multiple jobs with proper installation and removal)
|
