Laticrete Quick Cure Hydro Ban Waterproofing Membrane
Product Details
Product Details
Laticrete Quick Cure Hydro Ban Waterproofing Membrane - 1 Gallon
Hydro Ban Quick Cure is a rapid, ready-to-use waterproofing membrane with wet-sure technology that allows the membrane to cure even in humid, cold or damp environments. Quick Cure waterproofing membrane allows for flood testing within just 30 minutes - the contractor can install a full shower system all in one day!
Features
- 1 gallon unit approximate coverage - 134 ft/gal
- Designed for both commercial and residential tile installations suited for interior substrates
- Easily applied with a paint brush or roller
- Bonds directly to metal, PVC, stainless steel and ABS drain assemblies
- Can be used in humid, cold and damp environments
- Allows for flood testing in 30 min. at 70°F (21°C) or highe
- Allows for crack isolation up to 1/16 when applied at 30 mils thick, anything over will require the use of fabric within any cove, corner, movement joint and other areas of transition
- Thin; only 0.012" (0.3 mm) thick when cured
- Exceeds ANSI A118.10
- No solvents and non-flammable
- Install tile, brick and stone directly onto membrane
- Eco-friendly, Low VOC
Uses
- Swimming pools, fountains and water features
- Shower pans, stalls and tub surrounds
- Industrial, commercial and residential bathrooms and laundries
- Spas and hot tubs
- Kitchens and food processing areas
- Terraces and balconies over unoccupied spaces
- Countertops
Suitable Substrates
- Concrete
- Concrete and Brick Masonry
- Cement Mortar Beds
- Cement Plaster
- Gypsum Wallboard
- Exterior Glue Plywood
- Ceramic Tile and Stone
- Cement Terrazzo
- Cement Backer Board
- Poured Gypsum Underlayment
Questions & Answers
1 questions
1 questions
STC rating?
by james ferrara 6/23/2021 1:47:53 pm
There is no STC Rating for the 9266-0001-2 Quick Cure Hydro Ban Waterproofing Membrane - 1 Gallon
Ratings & Reviews
1 review
12/11/2018 11:53 am
Buy this
by D rok tile
This stuff needs to be in your bag of tricks