Imer Koine 4 Continuous Mixer & Pump

(0) No Reviews yet
SKU: 1106004
Imer
1106004
$21,599.99

This item requires a commercial addressFree shipping

Product Details

Product Details

Imer Koine 4 Continuous Mixer & Pump

Ime Koine 4 is a Hi-FLOW continuous mixing, pumping for premixed bagged materials. Designed for mixing and pumping wall grouts and self leveling underlayments when you need tremendous production. The Koine 4 does the work of 2-3 mixers as well as runners walking with buckets hundreds of feet away back and forth. Once the water is adjusted to the desired consistency, continuously feed the bags for a uniform batch from start to finish.


Features

  • Pump self leveling underlayments or fill blocks with grouts
  • Hopper and feeding wheel can handle up to 9 50 lb. bags of dry material at one time, delivering dry material at a constant rate to the mixing chamber to be mixed and then pumped out
  • Gear driven continuous feed impeller wheel provides dry material to mixing chamber
  • Dust control grate with vacuum port helps eliminate dust
  • Upgraded self priming water pump can pull water from external tank, no water hook up required
  • Heavy duty motor drives the gearbox, main shaft, mixing paddle, rotor, and standard turbo mixer
  • Included is a 1 hp water booster pump to boost the water pressure and flow and also siphon water from a tank if needed
  • Boosting the water provides a surplus in which a regulator injects the water into the mixing chamber at a controlled rate
  • Booster pump is also used to flush out the hoses so that your quick setting materials do not set up
  • Wired remote control works from over 100' away allowing you to see how much flow is filling up your void or floor
  • If you need to stop for a break or end of day you can leave the dry, unmixed material in the hopper just switch off the feeding wheel and use out what is in the mixing chamber
  • Optional dual diaphragm compressor can be added to spray mortars, stucco, plasters, etc.
  • 2500 liter per hour water system allows for precisely metered flow for different materials based on requirements
  • Easy clean up mixing chamber with different material paddles available
  • Switchable 3 phase connection via phase converter switch for forward and reverse
  • Only 27 inches wide to fit thru any doorway
  • Motor with 410 RPM gear reduction drive system to the paddle
  • Powerful 100% duty cycle high torque motor
  • Low 36" hopper loading height

What's Included?
  • Imer Koine 4 Continuous Mixer & Pump
  • R8 Rotor / Stator with drive tab for Turbo Mixer
  • Turbo mixer with pressure gauge
  • Hi Flow mixing chamber with standard mixing paddle
  • Dust control grate over hopper and feeding wheel
  • Water booster pump with advanced adjustable water flow system
  • 130' of electrical cord
  • 130' of 3/4" water hose
  • 33' of 35mm / 1-3/8" material hose
  • Hose cleaning kit with tool box
  • Mixing chamber clean out tool
  • Operator's manual

IMER Koine 4 Hi-FLOW Continuous Mixer Specifications
Power Supply220V, 3 phase
Total Machine Power9 hp
Mixin and Pumping
Motor Power
7.5 hp
Feeling Impeller Wheel
Motor Power
1 hp
Material Flow Rate169 CFH
50 lb Bag per Minute5-7
Max Pumping Distance with 1-3/8" Hose300+ ft.
Hopper Capacity
(50 lb. bags)
9
Loading Height36"
Dimensions29" x 47" x 61.5"
Weight475 lb.

Questions & Answers
No questions available

Be the first to Write a question

Ratings & Reviews

No reviews available

Be the first to Write a Review