{"title":"Waterproofing Membranes \u0026 Uncoupling Membranes","description":"\u003cp\u003eWaterproofing is critical in areas like bathrooms and kitchens. Preventing water from seeping through the tiles and causing damage to the underlying structure. Contractors Direct offers a wide range of top-rated waterproof sheet and liquid membranes from trusted brands like Schluter, Laticrete, and Mapei.\u003c\/p\u003e","products":[{"product_id":"tavy-thin-skin-roll","title":"Tavy Thin Skin Tile Underlayment 100 Sq. FT Roll","description":"\u003ch2\u003eTAVY Thin-Skin Tile Underlayment 100 Sq. Ft. Roll\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBackordered Item with No ETA\u003c\/p\u003e\n\u003cp\u003eAdd the classic touch of tile to any room!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Part Underlayment System was developed to provide an underlayment for tile that could be installed over any surface without adding additional height to the sub-floor\u003c\/li\u003e\n\u003cli\u003eThe Thin-Skin System is so simple that it can be installed by both professionals and DIYers\u003c\/li\u003e\n\u003cli\u003eIt can be used with either modified or non-modified thin-set mortar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBenefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTested by Tile Council of America\u003c\/li\u003e\n\u003cli\u003eNo need to buy or install nails\/screws\u003c\/li\u003e\n\u003cli\u003eIncrease tiling applications by eliminating tearouts of existing surfaces\u003c\/li\u003e\n\u003cli\u003eAllows for tile or stone to be set on any surface\u003c\/li\u003e\n\u003cli\u003eLightweight and more accessible to transport (less than 15 lbs. per 100 square feet), NO dusty mess to clean up\u003c\/li\u003e\n\u003cli\u003eNO additional height is added to any surface as opposed to the current underlayments\u003c\/li\u003e\n\u003cli\u003eNO waste; all TAVY Thin-Skin Underlayment pieces are usable regardless of size and shape\u003c\/li\u003e\n\u003cli\u003e25% - 50% lower cost than other underlayments\u003c\/li\u003e\n\u003cli\u003eOne roll of TAVY Thin-Skin Underlayment 2.5' X 40' and one gallon of TAVY Thin-Skin #007 Glue will cover 100 square feet\u003c\/li\u003e\n\u003cli\u003eThin-skin underlayment is ideal for making templates for difficult cuts\u003c\/li\u003e\n\u003cli\u003eMinimize overall load weight\u003c\/li\u003e\n\u003cli\u003eCrack suppression up to 1\/8\" over concrete\u003c\/li\u003e\n\u003cli\u003eCan Not Be Used For Waterproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSteps to installing the TAVY THIN-SKIN Two-Part Tile Underlayment System\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1. Clean the sub-surface of debris\u003c\/li\u003e\n\u003cli\u003e2. Spread TAVY Thin-Skin #007 Glue\u003c\/li\u003e\n\u003cli\u003e3. Install TAVY Thin-Skin Underlayment\u003c\/li\u003e\n\u003cli\u003e4. Skim coat TAVY Thin-Skin Underlayment with mortar\u003c\/li\u003e\n\u003cli\u003e5. Start setting tile!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTOOLS REQUIRED\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePencil, knife or scissors, 5\/32\" v-notched trowel (minimum), 5\/32\" v-notched spatula, latex modified mortar, putty knife, and margin trowel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tavy","offers":[{"title":"Default Title","offer_id":51329725694226,"sku":"8500","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/tavy-thin-skin-roll--3011_01.webp?v=1774459211"},{"product_id":"noble-waterproof-outside-corner","title":"Noble Waterproof Dam\/Outside Corner","description":"\u003ch2\u003eNoble Waterproof Dam\/Outside Corner\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePreformed Dam\/Outside Corner to protect shower pan waterproofing from leaks at thresholds or for outside\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e270-degree angles\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMade from Chlorinated Polyethylene\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWill not crack, rot, or deteriorate due to microorganisms\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUse NobleSealant 150 to adhere the corner and seal it to the membrane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Noble","offers":[{"title":"Default Title","offer_id":51329732083986,"sku":"2747","price":8.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/noble-waterproof-outside-corner--11847_01.webp?v=1774459282"},{"product_id":"noble-waterproof-inside-corner","title":"Noble Waterproof Inside Corner","description":"\u003ch2\u003eNoble Waterproof Inside Corner\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePreformed Inside Corners are made from CPE with fabric laminated to the outside\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThey protect against leaks and are ideal for use with lap corners\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMade from Chlorinated Polyethylene\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWill not crack, rot, or deteriorate due to microorganisms\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUse NobleSealant 150 to adhere the corner and seal it to the membrane\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Noble","offers":[{"title":"Default Title","offer_id":51329732215058,"sku":"2748","price":7.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/noble-waterproof-inside-corner--11848_01.webp?v=1774464320"},{"product_id":"noble-chloraloy-shower-pan-liner","title":"Noble Chloraloy Shower Pan Liner, 5 Ft. Wide, Per Linear Ft.","description":"\u003ch2\u003eNoble Chloraloy Shower Floor Liner, 5 Ft. Wide, Per Linear Ft\u003c\/h2\u003e\n\u003cp\u003ePremium shower pan liner made from Chlorinated Polyethylene (CPE). Chloraloy sold by the linear foot is NON-RETURNABLE. Applications: shower pans, Roman tub liners, steam rooms, toilet rooms, hydrotherapy rooms, reflective pools, and planters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePricing is Per Linear ft. Example: If you would like a 5' x 4' piece, order a quantity of 4; If you would like a 5' x 8' piece, order a quantity of 8\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eLifetime guarantee. Made from durable CPE\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWill not rot, crack, or rust\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAbsolute waterproofing-lowest permeability\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt saves time, no curing!\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e40 Years of proven performance as the industry standard for waterproofing\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTile cannot be bonded directly on Chloraloy; a mortar bed should be installed over Chloraloy\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eChloraloy is not designed for prolonged exposure to direct sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTraditional Tiled Shower Assemblies\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eThe flexible liners conform to the various contours of the wood framing, bending upward at the walls and folding into corners\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCeramic tile showers are not waterproof; moisture will infiltrate the mortar bed\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe pan liner needs to be slopped, or the system will not effectively drain the water to the weep holes in the drain, creating a permanently saturated mortar bed\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIncreasing the potential for efflorescence and mold growth within the system\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eBe careful not to puncture the pan liner by using nails to fasten backer board panels to the curb\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEven small penetrations in a pan liner can lead to significant leaks and damage to the surrounding materials\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTest the installation by plugging the drain pipe and filling the shower basin with water just below the top of the curb, and then let it sit for four hours until you're sure the installation is leak-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Noble","offers":[{"title":"Default Title","offer_id":51329732444434,"sku":"105","price":35.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/noble-chloraloy-shower-pan-liner--11857_01.webp?v=1774464859"},{"product_id":"noble-seal-ts-membrane","title":"NobleSeal TS Membrane 5 ft. Wide, Per Linear ft.","description":"\u003ch2\u003eNobleSeal TS, Thin-set Waterproofing Membrane\u003c\/h2\u003e\n\u003cp\u003e5 Ft. Wide, Per Linear Ft NobleSeal TS sold by the linear foot is NON-RETURNABLE. Use in interior applications of ceramic and stone tile, both horizontal and vertical surfaces, over common substrate. Thin-set shower waterproofing, steam rooms, fountains, pools and planters. Also wet areas in shopping centers, food courts, hotel, condominiums, supermarket, prisons, health clubs, military and university housing and malls.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePricing Per Linear Foot Example: If you would like a 5' x 4' piece, order a quantity of 4; for a 5' x 8' piece, order a quantity of 8\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMax continuous sheet size is 100 linear feet\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003eProvides waterproofing and crack isolation\/joint bridging for thin-set installations of ceramic and stone tile\u003c\/li\u003e\n\u003cli\u003eSuitable for Thin-Bed Shower Waterproofing\u003c\/li\u003e\n\u003cli\u003eBest Moisture\/Vapor Barrier\u003c\/li\u003e\n\u003cli\u003eProtects Thin-Set Tile from Cracking\u003c\/li\u003e\n\u003cli\u003eUse Over Common Substrates including concrete, many plywood sub floors, radiant heat and primed gypsum underlayments\u003c\/li\u003e\n\u003cli\u003eBest moisture \/ vapor barrier, 0.050 perms\u003c\/li\u003e\n\u003cli\u003eRated \"extra heavy\" by Robinson, test (ASTM C 627)\u003c\/li\u003e\n\u003cli\u003eGuaranteed not to rot, crack or deteriorate\u003c\/li\u003e\n\u003cli\u003eEnsures uniform thickness and quality\u003c\/li\u003e\n\u003cli\u003eMinimizes workmanship variables\u003c\/li\u003e\n\u003cli\u003eNo curing install tile immediately\u003c\/li\u003e\n\u003cli\u003eBond with NobleBond EXT for fast cure time, can also be bonded with latex modified thin-set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eHow to specify\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecify in division 9 where required, provide NobeSeal TS, a composite sheet membrane manufactured from Chlorinated Polyethylene (CPE), with polyester fabric to both sides\u003c\/li\u003e\n\u003cli\u003eNominal thickness of 0.8mm (.030\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eBonded Waterproof Tiled Shower Assemblies\/Sealed Systems\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBonded waterproof membranes, are glued to the substrate and allow for the direct application of tile\u003c\/li\u003e\n\u003cli\u003eThese membranes include sheet-applied products, which are bonded to the substrate with thin-set mortar or other adhesives, and trowel-applied products, which are spread over the substrate and allowed to dry\/cure\u003c\/li\u003e\n\u003cli\u003eNoble trowel applied membrane incorporate reinforcing mesh over the entire surface\u003c\/li\u003e\n\u003cli\u003eNobleseal TS allow the installer to produce a sealed system, in contrast to the shower pan liner\u003c\/li\u003e\n\u003cli\u003eIn general, the process begins with the installation of a sloped mortar base on the sub-floor and solid backing on the walls\u003c\/li\u003e\n\u003cli\u003eInstall NobleSeal TS on top of the mortar bed, backing and tie into the drain\u003c\/li\u003e\n\u003cli\u003eTile over the membrane using thin-set mortar\u003c\/li\u003e\n\u003cli\u003eFinished assembly does not permit moisture penetration into the solid backing or mortar bed, allowing the assembly to dry completely between uses and eliminating the potential for mold growth in the system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Noble","offers":[{"title":"Default Title","offer_id":51329731985682,"sku":"186","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/noble-seal-ts-membrane--11842_01.webp?v=1774466065"},{"product_id":"oc-hydroban-outside-corner","title":"Laticrete Hydro Ban Waterproofing Outside Corners","description":"\u003ch2\u003eLaticrete Hydro Ban 2-pack of Outside Corners\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtect against leaks and are ideal for use with lap corners\u003c\/li\u003e\n\u003cli\u003eConforms easily to irregular substrates\u003c\/li\u003e\n\u003cli\u003eDurable polypropylene surface fused to the core for optimal bond strength and integrity\u003c\/li\u003e\n\u003cli\u003eAllows for usage of polymer-modified or unmodified mortar. Use proper mortar for the job\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329742799122,"sku":"9455-0002-OC","price":16.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/oc-hydroban-outside-corner--17014_01.webp?v=1774466067"},{"product_id":"sealing-tape-hydro-ban-5-in","title":"Laticrete Hydro Ban 5\" x 16'.5\" Sealing Tape","description":"\u003ch2\u003eLaticrete Hydro Ban 5\" Wide x 16'5\" Long Sealing Tape\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSections of Hydro Ban sheet membrane should be butt-jointed, and the seam between the sheet membrane sections should be covered with sealing tape\u003c\/li\u003e\n\u003cli\u003eMake sure that the sealing tape overlaps each HYDRO BAN Sheet Membrane section by a minimum of 2\" (5 cm)\u003c\/li\u003e\n\u003cli\u003eThe floor should be the last section installed. NOTE: Sections of sheet membrane may also be shingled (overlapped) during installation without the need for sealing tape\u003c\/li\u003e\n\u003cli\u003eTreat the vertical corners with the sealing tape next in the same manner as the floor-to-wall transitions were installed. Overlap the corners by 2\" (5 cm)\u003c\/li\u003e\n\u003cli\u003eFor any sections where two strips of sealing tape will be joined, be sure to overlap the material by 2\" (5 cm)\u003c\/li\u003e\n\u003cli\u003eIt is essential that there should not be excessive overlapping. For example, at the corner, the HYDRO BAN Sealing Tape should overlap the HYDRO BAN Preformed Corner but not the adjacent HYDRO BAN Sealing Tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329743388946,"sku":"9455-0516-2","price":31.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/sealing-tape-hydro-ban-5-in--17015_01.webp?v=1774459337"},{"product_id":"9455-0034-pc-laticrete-pipe-collar","title":"Laticrete Hydro Ban 3\/4\" Waterproofing Pipe Collar","description":"\u003ch2\u003eLaticrete Hydro Ban 3\/4\" Pipe Collar\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePreformed to ensure a more accessible and more secure installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSeals pipe penetrations\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e3\/4\" (20mm) Pipe Collar used with 1\/2\" - 3\/4\" pipe (12.7-20mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePackaged and sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329744142610,"sku":"9455-0034-PC","price":14.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/9455-0034-pc-laticrete-pipe-collar--17020_01.webp?v=1774464906"},{"product_id":"laticrete-hydro-ban-sheet-membrane","title":"Laticrete 108 ft² Waterproofing Sheet Membrane","description":"\u003ch2\u003eLaticrete Hydro Ban 108 ft\u003csup\u003e2\u003c\/sup\u003e (10 m\u003csup\u003e2\u003c\/sup\u003e) Waterproofing Sheet Membrane\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003e3'3\" x 33' = 108 ft\u003csup\u003e2\u003c\/sup\u003e (1 m x 10 m = 10 m\u003csup\u003e2\u003c\/sup\u003e)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eHigh performance low-perm waterproofing sheet membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFor use in interior, residential, and commercial waterproofing applications, including steam showers and steam rooms\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eConstructed of a thin, durable polyethylene core with a fused non-woven polypropylene exterior surface for optimum bond strength\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for the appropriate mortar usage polymer-modified or unmodified, depending upon substrate and type of tile used\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for quick, easy waterproofing installations, which will retain their integrity for the life of the installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eBacked by an available lifetime system warranty\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApproved for steam showers\/rooms\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for polymer-modified or unmodified mortar usage\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePliable construction conforms easily to substrate\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for installation over green mortar beds\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eDurable polypropylene surface fused to the core for optimal bond strength and integrity\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for usage of polymer-modified or unmodified mortar; use proper mortar for the job\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat is a Laticrete Waterproofing Sheet\u003c\/h4\u003e\n\u003cp\u003eLaticrete HYDRO BAN Sheet Membrane is a thin, flexible waterproofing sheet used to protect showers, bathrooms, steam rooms, and wet areas from water infiltration. It is installed using a substrate appropriate LATICRETE thin-set mortar.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eDoes it allow for installation over green mortar beds\u003c\/h4\u003e\n\u003cp\u003eYes, Laticrete Waterproofing Sheet can be installed while the mortar bed is green (just beginning to dry )\u003c\/p\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329744568594,"sku":"945501082","price":236.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/laticrete-hydro-ban-sheet-membrane--17030_01.webp?v=1774463975"},{"product_id":"017701502-laticrete-roll-strata-mat","title":"Laticrete Strata Mat Uncoupling Membrane - 150 sq ft.","description":"\u003cdiv style=\"background: rgba(0, 173, 216); color: #ffffff;\" class=\"offer\"\u003e\u003cspan\u003eNEW LOW PRICE! HUGE SAVINGS DURING OUR MONTHLY SPECIAL!\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eLaticrete STRATA MAT Uncoupling Membrane \u003c\/h2\u003e\n\u003cp\u003eLaticrete Strata Mat uncoupling membrane 40' Long x 45\" Wide Half roll 150sq. ft\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003e\u003ca href=\"\/products\/0177-0323-2-laticrete-strata-mat\"\u003e Click here for a 323 sq ft Full Roll of Strata-mat\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eLaticrete Strata Mat Uncoupling Membrane - 150 sq ft. is a next-generation high-performance uncoupling membrane for use under ceramic tile and stone installations for residential and commercial applications. Designed to replace traditional underlayment materials\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe unique patent pending design of STRATA MAT provides for an enhanced mechanical bond of the adhesive mortar and provides for faster drying of the mortar, allowing for a shorter time to grout\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSpecifically designed for use with both modified and unmodified mortars\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eLATICRETE STRATA MAT allows for the proper adhesive mortar to be used with porcelain or large format tiles and stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eMortar Hydration Vents creates a mechanical bond between the mat\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProvides vapor management\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for use of the appropriate mortar per industry standards\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt helps prevent transmission of in-plane substrate cracks of up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eInstant coverage verification allows the installer to see mortar coverage underneath the mat during installation without having to lift and verify\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for easier floor layout as chalk lines are easily visible on the surface before tile installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRated Extra Heavy per ASTM C627\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eLightweight, easy to carry, and fast to install with standard tools\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt can be used under moisture-sensitive stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eIs the Laticrete Strata mat waterproof?\u003c\/h4\u003e\n\u003cp\u003eSTRATA_MAT™ is not intended for use as a waterproofing membrane. It is not for worn surfaces; it must be covered with tile. Adhesives\/mastics, mortars, and grouts for ceramic tile, pavers, brick, and stone are not replacements for waterproofing membranes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat is the strata mat used for?\u003c\/h4\u003e\n\u003cp\u003eSTRATA_MAT™ XT is designed specifically for ceramic tile and dimension stone installations. It serves as an uncoupling layer and vapor management layer, accommodating moisture from beneath the tile covering.\u003c\/p\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329747517714,"sku":"17701502","price":289.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/017701502-laticrete-roll-strata-mat--18775_01.webp?v=1774465380"},{"product_id":"5-in-hydro-ban-sealing-tape","title":"Laticrete Hydro Ban 5\" Wide x 98'.5\" Long Sealing Tape","description":"\u003ch2\u003eLaticrete Hydro Ban 5\" Wide x 98'.5\" Long Sealing Tape\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eSections of Hydro Ban sheet membrane should be butt-jointed, and the seam between the sheet membrane sections should be covered with sealing tape\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMake sure that the sealing tape overlaps each HYDRO BAN Sheet Membrane section by a minimum of 2\" (5 cm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe floor should be the last section installed. NOTE: Sections of sheet membrane may also be shingled (overlapped) during installation without the need for sealing tape\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTreat the vertical corners with the sealing tape next in the same manner as the floor-to-wall transitions were installed. Overlap the corners by 2\" (5 cm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFor any sections where two strips of sealing tape will be joined, be certain to overlap the material by 2\" (5 cm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt is essential that there should not be excessive overlapping. For example, at the corner, the HYDRO BAN Sealing Tape should overlap the HYDRO BAN Preformed Corner but not the adjacent HYDRO BAN Sealing Tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329744994578,"sku":"9455-0598-2","price":94.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/5-in-hydro-ban-sealing-tape--17031_01.webp?v=1774461172"},{"product_id":"laticrete-membrane-fabric","title":"Laticrete Waterproofing Membrane Fabric 6\" x 75 ft. Roll","description":"\u003ch2\u003eLaticrete Waterproofing Membrane Fabric 6\" x 75 ft. Roll\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse for corners and coves with Laticrete Hydro Barrier\u003c\/li\u003e\n\u003cli\u003eUse for coves and corners with a gap that exceeds 1\/8\" for all membranes\u003c\/li\u003e\n\u003cli\u003eRequired for expansion gaps or cracks in surface exceeding 1\/8\" when using ALL Laticrete Crack Suppression Membranes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329747845394,"sku":"S-09235-NF-19","price":32.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/laticrete-membrane-fabric--18776_01.webp?v=1774459554"},{"product_id":"arc-external-waterproofing-corner","title":"Arc Inc. External Waterproofing Corner","description":"\u003ch2\u003eArc Inc. External Waterproofing Corner\u003c\/h2\u003e\n\u003cp\u003eThe Arc Inc. external corner is a rugged, flexible, preformed corner tape for covering joints to prevent moisture penetration and provide a sound foundation for tile or stone overpayments. It also acts as anti-fracture protection between substrates and hard surface coverings.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse to cover joints between ARC TrueDEK shower foundations and surrounding tile backer and to cover joints between tile backer panels\u003c\/li\u003e\n\u003cli\u003eBonds well with TANK\/10 waterproofing compound\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eWidth: 4-3\/4\" overall; 1\" mesh edges; 2-3\/4\" center\u003c\/li\u003e\n\u003cli\u003eLength: 11\" overall; 5-1\/2\" each leg\u003c\/li\u003e\n\u003cli\u003eThickness: approximately 1mm\u003c\/li\u003e\n\u003cli\u003eInvert to embed over outside corners\u003c\/li\u003e\n\u003cli\u003eImpermeable center polyester (blue) areas\u003c\/li\u003e\n\u003cli\u003eUse where three surfaces interface at 90°\u003c\/li\u003e\n\u003cli\u003eFill gaps beneath tape that are 1\/8\" wide or more using latex caulk or thin-set mortar (do not use silicone)\u003c\/li\u003e\n\u003cli\u003eRemove all dirt, debris, and contaminants from surfaces before embedding tape. Surfaces must be completely dry before embedding tape\u003c\/li\u003e\n\u003cli\u003eThe corner is not designed as a worn surface; it is covered with tile, stone, or other appropriate material\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Arc Inc.","offers":[{"title":"Default Title","offer_id":51329748271378,"sku":"WP3201-EXT","price":9.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/arc-external-waterproofing-corner--22772_01-Photoroom.webp?v=1776448777"},{"product_id":"anti-fracture-300-sq-ft","title":"Laticrete 9235 Waterproofing Membrane Fabric 300 sq ft. Roll","description":"\u003ch2\u003eS-09235-NF-18 Laticrete 9235 Waterproofing Membrane Fabric 300 sq ft Roll\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor use in all field applications using Laticrete 9235 Waterproofing Membrane Liquid\u003c\/li\u003e\n\u003cli\u003eIt can also be used for Corners and Coves when using Laticrete Hydro Ban and Hydro Barrier products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eUses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor interior or exterior use on floors and walls, whenever hairline cracking or \"spider-webbing\" occurs in the substrate\u003c\/li\u003e\n\u003cli\u003eFor use over shrinkage and other non-structural cracks up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003eTypical applications are over concrete slabs (suspended or on grade) in malls, lobbies, and residential applications under ceramic tile, marble, and stone\u003c\/li\u003e\n\u003cli\u003eUse to cover joints in plywood underlayment, cement backer boards, and concrete masonry on floors and walls\u003c\/li\u003e\n\u003cli\u003eAlso, use over concrete floors and underlayments with radiant heating systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApproximately 300 sq ft. (28 m\u003csup\u003e2\u003c\/sup\u003e) at 20 mil thickness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329748074770,"sku":"S-09235-NF-18","price":190.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/anti-fracture-300-sq-ft--20603_01.webp?v=1774465387"},{"product_id":"usg-durock-preformed-outside-corners","title":"USG Durock Shower System Preformed Outside Corners 2-pack","description":"\u003cdiv style=\"font-weight: bold; font-style: italic; background-color: rgb(255, 255, 0);\" class=\"offer\"\u003eClearance Product  -- Now Only $5 --\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eUSG Durock Preformed Outside Corner 2-pack\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizing the same state-of-the-art material as the rest of the USG Durock Shower System, several accessories are available to help you create a truly integrated and fully waterproof shower system\u003c\/li\u003e\n\u003cli\u003eThey protect against leaks and are ideal for use with lap corners\u003c\/li\u003e\n\u003cli\u003eThe waterproofing underlayment provides a completely waterproof barrier between the substrate and the installed tile when it is applied to code-approved substrates with unmodified thin-set mortar\u003c\/li\u003e\n\u003cli\u003eThis membrane is a vapor retarder that is thin, pliable, and highly durable\u003c\/li\u003e\n\u003cli\u003eComes in a 2-pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"USG Durock","offers":[{"title":"Default Title","offer_id":51329794408722,"sku":"170125","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/usg-durock-preformed-outside-corners--21643_01.webp?v=1774464935"},{"product_id":"usg-durock-preformed-pipe-seal","title":"USG Durock Shower System 3\/4\" Pipe Seal","description":"\u003ch2\u003eUSG Durock Shower System 3\/4\" Pipe Seal\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eWaterproof wall assemblies include pipe penetrations at shower heads, tub spouts, body sprays, etc. They are made from the same material as the DUROCK Waterproofing Membrane and feature over-molded stretchable rubber gaskets to seal pipe penetrations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizing the same state-of-the-art material as the rest of the USG Durock Shower System, several accessories are available to help you create a truly integrated and fully waterproof shower system\u003c\/li\u003e\n\u003cli\u003eThe waterproofing underlayment provides a completely waterproof barrier between the substrate and the installed tile when it is applied to code-approved substrates with unmodified thin-set mortar\u003c\/li\u003e\n\u003cli\u003eThis membrane is a vapor retarder that is thin, pliable, and highly durable\u003c\/li\u003e\n\u003cli\u003eA 3\/4\" pipe seal was performed to ensure a more accessible and more secure installation\u003c\/li\u003e\n\u003cli\u003ePrevents water from entering the wall cavity\u003c\/li\u003e\n\u003cli\u003eIt can be installed over an existing capped pipe nipple\u003c\/li\u003e\n\u003cli\u003eEliminates the need for sealant\u003c\/li\u003e\n\u003cli\u003ePacked Individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"USG Durock","offers":[{"title":"Default Title","offer_id":51329794933010,"sku":"170126","price":5.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/usg-durock-preformed-pipe-seal--21644_01.webp?v=1774459660"},{"product_id":"laticrete-strata-mats-xt","title":"Laticrete Strata Mat XT, Full Roll 150 sq. ft.","description":"\u003ch2\u003eLaticrete Strata Mat XT Full Roll 150 sq. ft.\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eSTRATA_MAT XT is designed specifically for ceramic tile and dimension stone installations, serving as an uncoupling layer and vapor management layer that accommodates moisture from beneath the tile covering. STRATA_MAT XT performs all these functions while providing the requisite support\/load distribution for the tile and stone covering. At 5\/16\" (7.9 mm) thick. STRATA_MAT XT helps to create an even transition between typical 1\/4\" to 3\/8\" (3 to 9 mm) thick tile and 3\/4\" (19 mm) thick hardwood flooring. STRATA_MAT XT will provide faster drying of the mortar, allowing for a shorter time to grout when using both modified or unmodified mortars and allowing you to use the appropriate mortar for the installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePackaging Sizes: 150 ft\u003csup\u003e2\u003c\/sup\u003e roll 45\" x 40\" (13.9m2 - 1.1m x 12.2m )\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMortar Hydration Vents create a mechanical bond between the mat and adhesive mortar, allowing the mortar to cure faster, providing a stronger bond of tile for faster time to grout\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for use of the appropriate mortar per industry standards\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProvides vapor management\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEliminates transmission of in-plane substrate cracks of up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eInstant coverage verification allows the installer to see mortar coverage underneath the mat during installation without having to lift and verify\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAllows for easier floor layout as chalk lines are easily visible on the surface before tile installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eLightweight, easy to carry, and fast to install with standard tools\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt can be used under moisture-sensitive stone\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuitable for interior non-industrial vehicular traffic applications over concrete substrates. Suitable Substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat thinset do you use on strata mat?\u003c\/h4\u003e\n\u003cp\u003eFor installation and that of porcelain tile manufacturers, LATICRETE recommends the use of a polymer-modified thin-set mortar complying with ANSI A118. 4 or ANSI A118. 15 (e.g., 254 Platinum) when installing porcelain tiles.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat is a key feature of Laticrete Strata Mat XT:\u003c\/h4\u003e\n\u003cp\u003eThe Strata Mat XT membrane is designed to support heavy loads and is suitable for residential and commercial applications.\u003c\/p\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329756561682,"sku":"0177-0150-XT","price":327.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/laticrete-strata-mats-xt--22369_01.webp?v=1774459655"},{"product_id":"hydro-ban-inside-corners","title":"Laticrete Hydro Ban Waterproofing Inside Corners","description":"\u003ch2\u003eLaticrete Hydro Ban 2-Pack of Inside Corners\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects against leaks and are ideal for use with lap corners\u003c\/li\u003e\n\u003cli\u003eConforms easily to irregular substrates\u003c\/li\u003e\n\u003cli\u003eDurable polypropylene surface fused to the core for optimal bond strength and integrity\u003c\/li\u003e\n\u003cli\u003eAllows for usage of polymer-modified or unmodified mortar. Use proper mortar for the job\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat is a Laticrete Waterproofing Sheet\u003c\/h4\u003e\n\u003cp\u003eLaticrete Hydro Ban Sheet Membrane is a thin, flexible, and self-adhesive waterproofing sheet used to protect showers, bathrooms, steam rooms, and wet areas from water infiltration.\u003c\/p\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329742176530,"sku":"9455-0002-IC","price":17.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/hydro-ban-inside-corners--17013_01.webp?v=1774459709"},{"product_id":"527-904-blanke-underlayment","title":"Blanke Permat Tile Underlayment 6.5 sq ft Single Sheets","description":"\u003ch2\u003eBlanke Permat Tile Underlayment 6.5 sq. ft. Single Sheet\u003c\/h2\u003e\n\u003cp\u003eInnovative uncoupling underlayment that offers all the labor saving benefits of the old plastic roll systems. It also adds support to wood substrates thereby reducing deflection and provides greater compression and tensile strength than plastic roll products. This tile underlayment is stable to walk on during installation and does not require additional curing time when installing porcelain with latex modified thinset.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8\" thick\u003c\/li\u003e\n\u003cli\u003eDimension 6.5 sq ft and measures 2 ft x 3.2 ft.\u003c\/li\u003e\n\u003cli\u003eNo extended cure time for latex modified thinset mortars under porcelain tile\u003c\/li\u003e\n\u003cli\u003eCrack isolation properties (uncoupling)\u003c\/li\u003e\n\u003cli\u003ePermanent Support of high quality flooring, stone, marble\u003c\/li\u003e\n\u003cli\u003eReduces vertical sub-floor movement (deflection)\u003c\/li\u003e\n\u003cli\u003eInterior use only\u003c\/li\u003e\n\u003cli\u003eAdds the extra substrate support for stone floor installation (max L\/720 for stone vs L\/360 for tile)\u003c\/li\u003e\n\u003cli\u003eApproved for ceramic tile installation over layer of 3\/4\" plywood on 24\" o. c. joist spacing\u003c\/li\u003e\n\u003cli\u003e10 years replacement warranty against problems caused by excess deflection only warranty of its kind in the industry (see permat warranty for details)\u003c\/li\u003e\n\u003cli\u003eSuperior compressible strength\u003c\/li\u003e\n\u003cli\u003eStrengthens wood substrates thereby reducing deflection\u003c\/li\u003e\n\u003cli\u003eSuperior tensile strength\u003c\/li\u003e\n\u003cli\u003eCrack isolation properties (uncoupling)\u003c\/li\u003e\n\u003cli\u003eSuperior resistance to delaminating during installation\u003c\/li\u003e\n\u003cli\u003eNo extended cure time for latex modified thinset mortars under porcelain tile\u003c\/li\u003e\n\u003cli\u003eLightweight; easy to install\u003c\/li\u003e\n\u003cli\u003eSelf-seaming panels prevent substrate movement stress from transmitting to tiled surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions for Installing Permat\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate must be clean, dry, flat and load bearing\u003c\/li\u003e\n\u003cli\u003eTrowel a more liquid than normal mix of thinset mortar onto substrate\u003c\/li\u003e\n\u003cli\u003eLay the Blanke PERMAT panels in a row so that the mesh overhang on the two sides of a panel cover the seams of the sides of adjacent panels without the overhang\u003c\/li\u003e\n\u003cli\u003eSubsequent rows of panels should be placed so that the seams running perpendicular to the previous row are offset a minimum of 3\" from the seams running in the same direction in the previous row\u003c\/li\u003e\n\u003cli\u003eUse the flat side of a trowel or a vinyl roller to press the panel into the thinset ensuring that the fabric on the underside of the panel achieves full contact with the thinset and that there are no air bubbles\u003c\/li\u003e\n\u003cli\u003eUse the flat side of the trowel to key thinset into the voids on top of the underlayment\u003c\/li\u003e\n\u003cli\u003eSet tile using a notched trowel appropriate for the type of tile and traffic. (Read Installation Instructions prior to installing this product)\u003c\/li\u003e\n\u003cli\u003eMovement joints are required in the tile surface per industry standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTypical Applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal alternative to backer board underlayment used in interior residential applications over wood substrates where excess deflection may be an issue and in commercial applications on concrete where stress cracks can be a problem\u003c\/li\u003e\n\u003cli\u003eIdeally suited for new home construction where demanding installation schedules cause traffic to cross on the underlayment prior to tile installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWood substrates stone and tile (including large format) Plywood EGP and OSB 16\" o.c. joist spacing, minimum subfloor thickness: 5\/8\" 19.2\" o.c. joist spacing, minimum subfloor thickness: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eWood substrates tile only (no larger than 16\"x16\") 24\" o.c. joist spacing, minimum subfloor thickness: 3\/4\" (subject to maximum joist span restrictions)\u003c\/li\u003e\n\u003cli\u003eConcrete substrates. Substrates covered with stone, tile and vinyl (consult thinset manufacturer instructions) Floor heating systems (consult Blanke installation instructions)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Data\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTop Mesh: Extruded twisted strands of highly alkali-resistant glass fiber, heat-welded to the lower layer of HDPE mesh\u003c\/li\u003e\n\u003cli\u003eBottom Mesh: Extruded twisted strands of alkali resistant high-density polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eFabric material: Polypropylene fleece\u003c\/li\u003e\n\u003cli\u003eThickness: approx. 3.3 mm (nominal 1\/8 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 0.8 kg\/m2 (approx. 2.6 ounces\/sq. ft): 1.06 lbs. per - panel: 31.8 lbs. per carton\u003c\/li\u003e\n\u003cli\u003eColor: Fabric: white HDPE Mesh: light-blue Top Mesh: dark blue\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blanke","offers":[{"title":"Default Title","offer_id":51329751482642,"sku":"527-904-US","price":17.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/527-904-blanke-underlayment--20660_01.webp?v=1774464941"},{"product_id":"9455-0323-2-sheet-membranes","title":"Laticrete Hydro Ban 323 ft² Waterproofing Sheet Membrane","description":"\u003ch2\u003eLaticrete Hydro Ban 323 ft\u003csup\u003e2\u003c\/sup\u003e Waterproofing Sheet Membrane\u003c\/h2\u003e\n\u003cp\u003e\n    HYDRO BAN Sheet Membrane is a waterproof covering layer that is a vapor barrier. This sheet membrane allows for\n    fast, simple, waterproof installations.\n\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eIncludes one (1) full roll of HYDRO BAN Sheet Membrane (3'3\" x 98'5\")\u003c\/li\u003e\n    \u003cli\u003eThe full roll provides 323 sq. ft. of coverage\u003c\/li\u003e\n    \u003cli\u003eHigh-performance, low-perm waterproofing sheet membrane\u003c\/li\u003e\n    \u003cli\u003eFor use in interior, residential, and commercial waterproofing applications\u003c\/li\u003e\n    \u003cli\u003e\n        Constructed of a thin, durable polyethylene core with a fused non-woven polypropylene exterior surface for\n        optimum bond strength and integrity\n    \u003c\/li\u003e\n    \u003cli\u003e\n        Sheet membrane can be installed using either polymer-modified or unmodified mortar depending on the substrate\n        and type of tile used\n    \u003c\/li\u003e\n    \u003cli\u003e\n        Allows for quick and easy waterproofing installations, which will retain their integrity for the life of the\n        installation\n    \u003c\/li\u003e\n    \u003cli\u003eApproved for steam showers\/rooms\u003c\/li\u003e\n    \u003cli\u003ePliable construction conforms easily to substrate\u003c\/li\u003e\n    \u003cli\u003eAllows for installation over green mortar beds\u003c\/li\u003e\n    \u003cli\u003e\n        Backed by an available\n        \u003ca href=\"\/cdn\/shop\/files\/laticrete-lifetime-warranty.pdf\"\u003eLifetime System Warranty\u003c\/a\u003e when installed with\n        Laticrete-approved materials\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329758822674,"sku":"9455-0323-2","price":584.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/9455-0323-2-sheet-membranes--24593_01.webp?v=1774466396"},{"product_id":"schluter-kerdi-seal-mv","title":"Schluter Kerdi 4-1\/2\" Mixing Valve Seal","description":"\u003ch2\u003eSchluter Kerdi 4-1\/2\" Mixing Valve Seal\u003c\/h2\u003e\n\u003cp\u003eThis seal is part of the Schluter KERDI waterproofing system. It is made from a KERDI waterproof membrane and provides a waterproof seal behind the shower's mixing valve.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eSold individually\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePrefabricated seals are cut sections of the Schluter-KERDI waterproofing membrane designed to seal protrusions through the Schluter-KERDI or Schluter-DITRA\/DITRA-XL membranes\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSchluter-KERDI-SEAL-MV features over-molded rubber gaskets and is used to seal pipe protrusions and protect moisture-sensitive solid backing panels at the mixing valve\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMixing valve opening diameter 4-1\/2\" (114 mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThickness 4mil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eHow do you waterproof a shower mixing valve?\u003c\/h4\u003e\n\u003cp\u003eMeasure and cut the Schluter Kerdi waterproofing membrane to fit the area around the mixing valve. Leave some excess membrane around the valve to ensure complete coverage. Using a notched trowel, apply a layer of thin-set mortar to the area where you'll be installing the Schluter Kerdi membrane. This mortar creates a solid bonding surface for the membrane and ensures a secure installation. \u003ca href=\"https:\/\/youtu.be\/tCrxYlVnamw\"\u003eLearn More\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003ch4\u003eWhat is a mixing valve seal?\u003c\/h4\u003e\n\u003cp\u003eA mixing valve is designed to protect the exposed edges of moisture-sensitive backing panels in Kerdi shower installations.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329756692754,"sku":"KMSMV235\/114","price":10.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-kerdi-seal-mv--23888_01.webp?v=1774459792"},{"product_id":"schluter-kerdi-pipe-seal-ps","title":"Schluter Kerdi 3\/4\" Water Pipe Seal","description":"\u003ch2\u003eSchluter Kerdi 3\/4\" Diameter Water Pipe Seal\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eSold individually\u003c\/li\u003e\n    \u003cli\u003ePrefabricated seals are cut sections of the Schluter-KERDI waterproofing membrane designed to seal protrusions through the Schluter-KERDI or Schluter-DITRA\/DITRA-XL membranes\u003c\/li\u003e\n    \u003cli\u003eSchluter-KERDI-SEAL-MV features over-molded rubber gaskets and are used to seal pipe protrusions and protect moisture-sensitive solid backing panels at the mixing valve\u003c\/li\u003e\n    \u003cli\u003ePipe opening diameter 3\/4\" (20 mm)\u003c\/li\u003e\n    \u003cli\u003eThickness 4mil\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329757053202,"sku":"KMS172\/20","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-kerdi-pipe-seal-ps--23894_01.webp?v=1774461113"},{"product_id":"schluter-ditra-xl-membrane","title":"Schluter Ditra Mat XL Uncoupling Membrane \u0026 Waterproofing Roll","description":"\u003ch2\u003eSchluter Ditra Mat XL Uncoupling Membrane \u0026amp; Waterproofing Roll\u003c\/h2\u003e\n\u003cp\u003ePolyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 ft. 3\" x 53' 3\" = 175 sq ft. (1 m x 16.25 m = 16.25 m\u003c\/li\u003e\n\u003cli\u003eProvide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface\u003c\/li\u003e\n\u003cli\u003eIn conjunction with tile coverings, forming an uncoupling, waterproofing, and vapor management layer while providing support load distribution\u003c\/li\u003e\n\u003cli\u003eThe combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood\/OSB, concrete, gypsum, heated floors, etc\u003c\/li\u003e\n\u003cli\u003e5\/16\" - (7 mm) thick allows even transitions between tile and 3\/4\" thick hardwood flooring\u003c\/li\u003e\n\u003cli\u003eFor ceramic tile application over single-layer plywood\/OSB subfloors on joists spaced up to 24\" (610 mm) o.c\u003c\/li\u003e\n\u003cli\u003eDITRA allows for ceramic tile application over single-layer plywood or OSB subfloors on joists spaced up to 19.2\" (488 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat is the difference between DITRA and DITRA-XL?\u003c\/h4\u003e\n\u003cp\u003eSchluter-Ditra-XL provides the same four essential functions as Schluter-Ditra: uncoupling, waterproofing, vapor management, and support\/load distribution. However, XL is 5\/16-inch thick, whereas Ditra is 1\/8-inch thick.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eWhat are some of the primary characteristics of Schluter DITRA XL\u003c\/h4\u003e\n\u003cp\u003eThe square-shaped cavities on the underside of DITRA XL allow for even load distribution across the tile covering. This feature is particularly beneficial when installing large-format tiles and stone. DITRA XL also comes in larger roll sizes, which can make the installation process more efficient\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329750630674,"sku":"DITRA-XL\/175","price":411.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-xl-membrane--23782_01.webp?v=1774465408"},{"product_id":"schluter-inside-corners","title":"Schluter KERDI Inside Corners - 2 Pack","description":"\u003ch2\u003eSchluter-KERDI-KERECK Inside Corners - 2 Pack\u003c\/h2\u003e\n\u003cp\u003eThe Schluter KERDI Inside Corners - 2 Pack are made for waterproofing inside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth. Part of the Schluter family of products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from standard KERDI membrane\u003c\/li\u003e\n\u003cli\u003e4-mil thickness\u003c\/li\u003e\n\u003cli\u003eCreate a water-tight seal over corner joints\u003c\/li\u003e\n\u003cli\u003eSold in packs of 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhich side of KERDI goes against wall?\u003c\/h3\u003e\n\u003cp\u003eKERDI membrane does not have a front\/back to it. One side of the membrane can feature printed gridlines for assistance with cutting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhy can't you use modified Thinset with Kerdi?\u003c\/h3\u003e\n\u003cp\u003eModified thinset mortars aren't recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329788051730,"sku":"KERECK\/FI2","price":17.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-inside-corners--24758_01.webp?v=1774464014"},{"product_id":"kerdi-outside-corner-2-pack","title":"Schluter KERDI Outside Corner - 2 Pack","description":"\u003ch2\u003eSchluter-KERDI-KERECK Outside Corner - 2 Pack\u003c\/h2\u003e\n\u003cp\u003eThese preformed, seamless corners are made for waterproofing outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold growth—part of the Schluter family of products.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMade from the popular Schluter KERDI membrane\u003c\/li\u003e\n\u003cli\u003e4-mil thickness\u003c\/li\u003e\n\u003cli\u003eCreate a watertight seal over the outside corner joints\u003c\/li\u003e\n\u003cli\u003eSold in packs of 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhich side of KERDI goes against wall?\u003c\/h4\u003e\n\u003cp\u003eKERDI membrane does not have a front\/back to it. One side of the membrane can feature printed gridlines for assistance with cutting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhy can't you use a modified Thinset with Kerdi?\u003c\/h4\u003e\n\u003cp\u003eModified thin-set mortars aren't recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329788477714,"sku":"KERECK\/FA2","price":17.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/kerdi-outside-corner-2-pack--24760_01.webp?v=1774459911"},{"product_id":"9200-0001-2-laticrete-membrane","title":"9200-0001-2 Laticrete Blue 92 Anti-Fracture Membrane Full Kit","description":"\u003ch2\u003eLaticrete Blue 92 Anti-Fracture Membrane Full Kit\u003c\/h2\u003e\n\u003cp\u003eA two-part system consists of liquid rubber and reinforcing fabric. When cured, it forms a highly flexible membrane. While the thin-bed method of tile installation provides many advantages, this method can be affected by problems with shrinkage cracking in concrete and other substrates. Cracks can telegraph through the tile or grout joints. To reduce or eliminate cracks in tile work, a flexible membrane should be applied to the cracked substrate before installing ceramic tile, marble, and stone.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eComplete Unit Kit includes: 5 US gallon (19 l) pail liquid, 1–roll reinforcing fabric: 38\" (97 cm) wide, 95 ft (29 m) long, 1–roll reinforcing fabric: 6\" (15 cm) wide, 75 ft (23 m) long\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces crack transmission in ceramic tile, thin brick, marble, and stone installed using the thin-set method. It is also ideal for use under cement-based or resin Terrazzo\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eInhibits the growth of stain-causing mold and mildew with Microban antimicrobial protection\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThin adds no appreciable thickness to floor construction; install tile with LATICRETE Polymer Fortified Thin-Set Mortar directly to the cured membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEasy to Apply. It goes on quickly with a paintbrush or roller; no mixing or special equipment is required\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFast Cure dries in a few hours to receive finished surfacing\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEasy Cleanup cleans with water while fresh\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSafe, no solvents or harsh fumes, non-flammable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eUses\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eFor interior or exterior use on floors and walls, whenever hairline cracking or “spiderwebbing” occurs in the substrate\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFor use over shrinkage and other non-structural cracks up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTypical applications are over concrete slabs (suspended or on grade) in malls, lobbies, and residential applications under ceramic tile, marble, and stone\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUse to cover joints in plywood underlayments, cement backer boards, and concrete masonry on floors and walls\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAlso, use over concrete floors and underlayments with radiant heating systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eCoverage\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eApproximately 300 sq ft. (28 sq m) at 20 mil thickness per complete unit\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApproximately 75 linear ft. (23 linear m) per crack suppression kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329753088274,"sku":"9200-0001-2","price":743.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/9200-0001-2-laticrete-blue-92-anti-fracture-membrane-full-kit--24259_00.webp?v=1774464348"},{"product_id":"0177-0323-2-strata-mats","title":"Laticrete 323 sq ft. Strata Mat Uncoupling Membrane","description":"\u003ch2\u003eLaticrete STRATA MAT Uncoupling Membrane Full Roll\u003c\/h2\u003e\n\u003cp\u003eA next-generation high-performance uncoupling membrane for use under ceramic tile and stone installations in residential and commercial applications. Its unique patent-pending design enhances the mechanical bond of the adhesive mortar and speeds up the mortar's drying, allowing for shorter grout times.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe uncoupling membrane is 45\" Wide 86' Long\u003c\/li\u003e\n\u003cli\u003eThe Laticrete Uncoupling Membrane is 1\/8\" (3 mm) thick, allowing the use of the appropriate mortar per industry standards\u003c\/li\u003e\n\u003cli\u003eFull roll 323 sq. ft. of coverage. Buy and save!\u003c\/li\u003e\n\u003cli\u003eDesigned to replace traditional underlayment materials\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for use with both modified and unmodified mortars\u003c\/li\u003e\n\u003cli\u003eAllows for the proper adhesive mortar to be used with porcelain or large-format tiles and stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eAdvantages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMortar Hydration Vents create a mechanical bond between the mat and efficient mortar curing\u003c\/li\u003e\n\u003cli\u003eProvides vapor management\u003c\/li\u003e\n\u003cli\u003eAllows for use of the appropriate mortar per industry standards\u003c\/li\u003e\n\u003cli\u003eIt helps prevent transmission of in-plane substrate cracks of up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003eInstant coverage verification allows the installer to see mortar coverage underneath the mat during installation without having to lift and verify\u003c\/li\u003e\n\u003cli\u003eAllows for easier floor layout as chalk lines are easily visible on the surface before tile installation\u003c\/li\u003e\n\u003cli\u003eRated Extra Heavy per ASTM C627\u003c\/li\u003e\n\u003cli\u003eLightweight, easy to carry, and fast to install with standard tools\u003c\/li\u003e\n\u003cli\u003eIt can be used under moisture-sensitive stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat is the decoupling membrane for tile?\u003c\/h4\u003e\n\u003cp\u003eDecoupling membranes are designed to neutralize tensions between the substrate and the tiles. The uncoupling membrane helps to prevent stress cracks from transferring through to the finished tiled surface.\u003c\/p\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329796800786,"sku":"17703232","price":477.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/0177-0323-2-strata-mats--laticrete-strata-mat--24780_01.webp?v=1774466355"},{"product_id":"ardex-flexbone-shears","title":"Ardex Flexbone Shears","description":"\u003ch2\u003eFlexbone Shears by Ardex\u003c\/h2\u003e\n\u003cp\u003eThe strongest shears on the market! Flexbone shears easily cut through uncoupling membranes, waterproofing fabrics, and membranes\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe perfect shears for your next installation\u003c\/li\u003e\n\u003cli\u003eCuts through uncoupling membranes, waterproofing fabrics \u0026amp; mesh tapes\u003c\/li\u003e\n\u003cli\u003eMade with ice-tempered stainless steel\u003c\/li\u003e\n\u003cli\u003eDesigned to keep a long-lasting edge and unmatched accuracy\u003c\/li\u003e\n\u003cli\u003eContractor Approved\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329760100626,"sku":"25035","price":64.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-flexbone-shears--25152_01.webp?v=1774464019"},{"product_id":"mapeguard-um-323-ft-roll","title":"Mapeguard UM Underlayment Membrane - 323 sq. ft. Roll","description":"\u003ch2\u003eMapeguard UM Underlayment Membrane - 323 sq. ft. (30 m²) Roll by Mapei\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eMapei's Mapeguard UM is a lightweight uncoupling mat for use under ceramic tile and stone installations. It can also work as a waterproofing and vapor-pressure-equalizing underlayment. This versatile underlayment membrane can perform in both commercial and residential applications on the most challenging substrate surfaces, such as young concrete and single-layer 3\/4\" plywood floors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePrevents transmission of in-plane substrate cracks up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRecommended for use with polymer-modified mortars\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFast Track Ready - approved for use over young (green) concrete and mortar beds\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTime-saving: Embed membrane, then install tile immediately\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEngineered cavity design allows easy single-pass filling of the surface core with less mortar\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUncoupling, waterproofing, and water vapor membrane up to 25 lbs. (11,3 kg) MVER and 100% relative humidity\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCompression resistance to support rolling loads\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApproved for radiant-heating applications\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe light green, translucent color shows mortar coverage under the membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduced “roll memory” and unique tri-layer construction keep the membrane flat\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEasy to cut with a standard utility knife\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eChalk and laser lines are easily visible on the surface\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe mesh-fabric top layer makes it easy to fill cavities with mortar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSuitable Substrates\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eConcrete\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCement mortar beds, self-leveling underlayment, and leveling coats\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eYoung (green) concrete\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIndustry-approved exterior-grade plywood and APA Sturd-I-Floor, Exposure 1 OSB (interior, dry areas only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApproved backer units – see manufacturer’s installation guidelines\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCement terrazzo (adequately prepared interior only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eExisting ceramic tile or stone (adequately prepared interior only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRadiant-heat systems\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eExisting, properly prepared vinyl flooring – vinyl composition tile (VCT), non-cushioned paper-backed\/felt-backed sheet vinyl, luxury vinyl tile\/plank (LVT\/LVP)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEpoxy terrazzo (with appropriate bond testing – interior only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eGypsum underlayment or lightweight concrete\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":51329769210130,"sku":"2850930","price":426.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/mapeguard-um-underlayment-membrane-323-sq-ft-roll--28407_02.webp?v=1774460001"},{"product_id":"ardex-sk-175-outside-corners-2-pack","title":"Ardex SK-175 Waterproofing Outside Corners (2 pack)","description":"\u003ch2\u003eArdex SK-175 Waterproofing Outside Corners\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSold in a pack of 2\u003c\/li\u003e\n\u003cli\u003eFor topside waterproof sealing, outside corners\u003c\/li\u003e\n\u003cli\u003eUse with Ardex high-performance polymer modified mortars\u003c\/li\u003e\n\u003cli\u003eEasy to cut and apply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329760657682,"sku":"24048","price":17.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-sk-175-outside-corners-2-pack--25169_01.webp?v=1774460030"},{"product_id":"mapeguard-um-54-ft-roll","title":"Mapeguard UM Underlayment Membrane - 54 sq. ft. (5 m²) Roll","description":"\u003ch2\u003eMapeguard UM Underlayment Membrane - 54 sq. ft. (5 m²) Roll by Mapei\u003c\/h2\u003e\n\u003cp\u003eMapei's Mapeguard UM is a lightweight uncoupling mat for use under ceramic tile and stone installations and can also work as a waterproofing and vapor-pressure-equalizing underlayment. This versatile underlayment membrane can perform in both commercial and residential applications on the most challenging substrate surfaces, such as young concrete and single-layer 3\/4\" plywood floors. The unique engineered tri-layered design of Mapeguard UM absorbs lateral stress from the substrate without transferring this force to the tile or stone, which maintains exceptional bonds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eDimensions: 39.4 in x 16.4 ft\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePrevents transmission of in-plane substrate cracks up to 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRecommended for use with polymer-modified mortars\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFast Track Ready - approved for use over young (green) concrete and mortar beds\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTime-saving: Embed membrane, then install tile immediately\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEngineered cavity design allows easy single-pass filling of the surface core with less mortar\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUncoupling, waterproofing, and water vapor membrane up to 25 lbs. (11,3 kg) MVER and 100% relative humidity\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCompression resistance to support rolling loads\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApproved for radiant-heating applications\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe light green, translucent color shows mortar coverage under the membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduced “roll memory” and unique tri-layer construction keep the membrane flat\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEasy to cut with a standard utility knife\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eChalk and laser lines are easily visible on the surface\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe mesh-fabric top layer makes it easy to fill cavities with mortar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eConcrete\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCement mortar beds, self-leveling underlayment, and leveling coats\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eYoung (green) concrete\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIndustry-approved exterior-grade plywood and APA Sturd-I-Floor, Exposure 1 OSB (interior, dry areas only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApproved backer units – see manufacturer’s installation guidelines\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCement terrazzo (adequately prepared interior only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eExisting ceramic tile or stone (adequately prepared interior only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRadiant-heat systems\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eExisting, properly prepared vinyl flooring – vinyl composition tile (VCT), non-cushioned paper-backed\/felt-backed sheet vinyl, luxury vinyl tile\/plank (LVT\/LVP)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEpoxy terrazzo (with appropriate bond testing – interior only)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eGypsum underlayment or lightweight concrete\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":51329769636114,"sku":"2850905","price":100.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/mapeguard-um-54-ft-roll--28852_01.webp?v=1774467377"},{"product_id":"ardex-ui-740-membranes","title":"Ardex UI 740 Flexbone Uncoupling Membrane","description":"\u003ch2\u003eArdex UI 740 Flexbone Uncoupling Membrane\u003c\/h2\u003e\n\u003cp\u003eArdex UI 740 Flexbone Uncoupling Membrane is a high load-bearing sheet membrane ideal for laying large format tile in high-traffic areas. The unique bone shape pattern with GripLock Technology delivers outstanding tensile bond strength between the membrane and mortar. The Flexbone system helps neutralize substrate movement by distributing heavy loads from above. Flexbone Uncoupling membrane can also be used as a waterproof layer in bathrooms and other wet areas.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 mm Uncoupling Mat\u003c\/li\u003e\n\u003cli\u003e39\" wide x 65.5' long (1 m wide x 20 m long) roll\u003c\/li\u003e\n\u003cli\u003eCoverage: 215 ft.² (20 m²) per roll\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tile and stone in heavy traffic areas\u003c\/li\u003e\n\u003cli\u003eFor use with porcelain, ceramic, quarry, and natural stone tiles\u003c\/li\u003e\n\u003cli\u003eIt helps prevent grout joint and tile damage from movement and deflection\u003c\/li\u003e\n\u003cli\u003eHigher shear and tensile bond strengths than comparable uncoupling membranes\u003c\/li\u003e\n\u003cli\u003eSuitable as a waterproofing membrane\u003c\/li\u003e\n\u003cli\u003eFor use in high-stress areas, such as shopping malls, airports, office buildings, hospitals, etc\u003c\/li\u003e\n\u003cli\u003eFor use over wooden or concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329760887058,"sku":"24252","price":257.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-ui-740-membranes--25208_01.webp?v=1774460050"},{"product_id":"ardex-ud-146-edge-insulation-strip","title":"Ardex UD 146 Edge Insulation Strip","description":"\u003ch2\u003eArdex UD 146 Edge Insulation Strip\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-adhering strips are used during Ardex UI 720 Flexbone Floating Membrane installations\u003c\/li\u003e\n\u003cli\u003eThis product is for use along the perimeter walls and around penetrations in the floor covering (columns, pipes, cabinets, etc.).\u003c\/li\u003e\n\u003cli\u003e4-1\/2\" x 65-1\/2\" roll\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329761739026,"sku":"24398","price":91.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-ud-146-edge-insulation-strip--25212_01.webp?v=1774460080"},{"product_id":"schluter-ditra-roller","title":"Schluter-DITRA Membrane Roller","description":"\u003ch2\u003eSchluter-DITRA Membrane Roller with Shelf\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures a 14-1\/2\" (37 cm)-wide roller for reduced effort required to embed membrane\u003c\/li\u003e\n\u003cli\u003eShelf for placing and transporting 50 to 75 lbs of weight (e.g., a bag of thin-set mortar or grout, a box of tiles, etc.)\u003c\/li\u003e\n\u003cli\u003eIt can be conveniently disassembled for transport and storage\u003c\/li\u003e\n\u003cli\u003eUsed to embed DITRA\/DITRA-XL in the bond coat\u003c\/li\u003e\n\u003cli\u003eManufactured by Schluter Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat roller is used for the DITRA mat?\u003c\/h4\u003e\n\u003cp\u003eWhat roller is used for the DITRA mat? Schluter®-DITRA Roller | Tools | Schluter Lightweight roller used to embed DITRA membranes to bond coat. The Schluter ®-DITRA Roller features a 14-1\/2” (37 cm)-wide roller and a shelf for placing 50 to 75 lbs of weight\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329793032466,"sku":"DIRO","price":257.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-roller--30704_01.webp?v=1774465783"},{"product_id":"kerdi-kereck-135-inside-corner","title":"Schluter KERDI-KERECK 135° Inside Corner 2 Pack","description":"\u003ch2\u003eSchluter KERDI-KERECK 135° Inside Corner 2 Pack\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreformed, seamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies to prevent leaks and mold-growth.\u003c\/li\u003e\n\u003cli\u003eEnsures a fully water-tight seal at inside and outside corners\u003c\/li\u003e\n\u003cli\u003e4-mil thickness minimizes build-up in corners\u003c\/li\u003e\n\u003cli\u003eMade of Kerdi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\nCommon Questions\n\u003ch3\u003e\n\u003cbr\u003e\n\u003ch4\u003e\nWhich side of KERDI goes against wall?\n\u003c\/h4\u003e\n\u003c\/h3\u003e\n\u003c\/h3\u003e\u003cp\u003e\nKERDI membrane does not have a front\/back to it. One side of the membrane can feature printed gridlines for assistance with cutting\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch4\u003e\nWhy can't you use modified Thinset with Kerdi?\n\u003c\/h4\u003e\n\u003cp\u003e\nModified thinset mortars aren't recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results.\n\u003c\/p\u003e\n\n","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329795883282,"sku":"KERECK135FI2","price":19.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/kerdi-kereck-135-inside-corner--30958_01.webp?v=1774460999"},{"product_id":"hydro-ban-mixing-valve-seal","title":"Laticrete Hydro Ban 4 1\/2\" Mixing Valve Seal","description":"\u003ch2\u003eLaticrete Hydro Ban 4 1\/2\" Mixing Valve Seal\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eUse in combination with HYDRO BAN Board for steam showers\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt can also be used with HYDRO BAN liquid applied to waterproofing membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e4-1\/2\" (114 mm) Mixing Valve\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePackaged and sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329775763730,"sku":"9455-0938-MV","price":19.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/hydro-ban-mixing-valve-seal--29869_01.webp?v=1774464984"},{"product_id":"kerdi-pipe-collars","title":"Schluter KERDI-KM 7\" x 7\" Pipe Collar - 5 Pack","description":"\u003ch2\u003eSchluter KM5117\/22 KERDI-KM 7\" x 7\" Pipe Collars\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eSold in 5 packs\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe pre-cut collar of the KERDI waterproofing membrane designed to seal around pipes or other similar elements through KERDI or DITRA\/DITRA-XL membranes\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWaterproof membrane designed to seal pipe protrusions and similar elements\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEnsures a fully water-tight seal, preventing leaks and mold growth\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e4-mil thickness minimizes build-up\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUse in conjunction with KERDI-FIX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich side of KERDI goes against the wall?\u003c\/h3\u003e\n\u003cp\u003eKERDI membrane does not have a front\/back to it. One side of the membrane can feature printed gridlines for assistance with cutting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCan you overlap KERDI?\u003c\/h3\u003e\n\u003cp\u003eSeams can be constructed by overlapping the edges of the KERDI 2\" (5 cm) using Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar, or by abutting the edges and covering the joint with KERDI-BAND using Schluter-SET, Schluter-ALL-SET, Schluter-FAST-SET, or unmodified thin-set mortar.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329798242578,"sku":"KM5117\/22","price":10.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/kerdi-pipe-collars--30979_01.webp?v=1774465975"},{"product_id":"kerdi-kereck-kit","title":"Schluter KERDI-KERECK Kit 1 Right\/1 Left Bench Corner","description":"\u003ch2\u003eSchluter KERDI-KERECK Kit - 1 Right + 1 Left Bench Corner\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eKerdi-Kers-B are preformed, seamless waterproofing corners made of Kerdi\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eDesigned for waterproofing the 135 angles between triangular shower benches and the wall\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAlso, work to waterproof the tops of curbs in neo-angle showers\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e4 mil thickness helps minimize build-up in the corners\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eKerdi-Kers-B are available for left and right bench corners and in a bench kit\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFor waterproofing 135 angles where corner shower benches and walls meet\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCompatible with Schluter SB41 Triangular Shower Bench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhich side of KERDI goes against the wall?\u003c\/h4\u003e\n\u003cp\u003eKERDI membrane does not have a front\/back to it. One side of the membrane can feature printed gridlines for assistance with cutting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhy can't you use a modified Thinset with Kerdi?\u003c\/h4\u003e\n\u003cp\u003eModified thin-set mortars aren't recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329799094546,"sku":"KERSB135KLR","price":41.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/kerdi-kereck-kit--30985_01.webp?v=1774463311"},{"product_id":"schluter-kerdi-pipe-seals","title":"Schluter Kerdi 1\/2\" Water Pipe Seal","description":"\u003ch2\u003eSchluter Kerdi 1\/2\" Water Pipe Seal\u003c\/h2\u003e\n\u003cp\u003eThe water pipe seals are prefabricated waterproofing seals with over-molded rubber gaskets designed for protrusions through KERDI, DITRA, or DITRA-XL membranes and protect moisture-sensitive backing panels at the mixing valve.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures a fully water-tight seal, preventing leaks and mold growth\u003c\/li\u003e\n\u003cli\u003e4-mil thickness minimizes build-up\u003c\/li\u003e\n\u003cli\u003eProtects exposed edges of moisture-sensitive backing panels\u003c\/li\u003e\n\u003cli\u003eSeals tightly to pipe penetrations\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329785037074,"sku":"KMS10172\/12","price":7.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-kerdi-pipe-seals--32866_01.webp?v=1774459606"},{"product_id":"010013675-nac-ecb-75","title":"NAC ECB 75 Crack Insolation Membrane (225 sf\/roll)","description":"\u003ch2\u003eNAC ECB 75 Crack Insolation Membrane (225 sf\/roll)\u003c\/h2\u003e\n\u003cp\u003e\n    ECB-75 is a 40 mil thick (approx. 1\/16\") sheet applied membrane designed for interior use under floor surfaces\n    requiring structural movement protection. It protects for up to 1\/4\" of structural movement. It is an ideal solution\n    for residential installations that require crack protection.\n\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eFor residential interior use\u003c\/li\u003e\n    \u003cli\u003eProtects against reflective cracking and delamination\u003c\/li\u003e\n    \u003cli\u003eSelf-bonding and self-healing formula\u003c\/li\u003e\n    \u003cli\u003eIt can be used for thin-bed and medium-bed applications\u003c\/li\u003e\n    \u003cli\u003eNo need to remove old floors or recess new ones\u003c\/li\u003e\n    \u003cli\u003eEliminates the need to cut tile to meet control\/cold joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n    \u003cli\u003e\n        Resists Moisture Vapor (MVT) 10#\/1000SF\/24HRS when used with NAC TAC or NS97 Primer or 7#\/1000SF\/24HRS when used\n        with NAC TAC II Primer\n    \u003c\/li\u003e\n    \u003cli\u003eFull roll weight 62 lbs\u003c\/li\u003e\n    \u003cli\u003eTile can be installed the same day as the membrane\u003c\/li\u003e\n    \u003cli\u003eWorks with radiant-heated floors and tile-warming systems\u003c\/li\u003e\n    \u003cli\u003eRoll Size: 3 ft. x 75 ft. (225 sf)\u003c\/li\u003e\n    \u003cli\u003eIIC: 65 per ASTM E492-04\u003c\/li\u003e\n    \u003cli\u003eSTC: 67 per ASTM E90-04\u003c\/li\u003e\n    \u003cli\u003eMeets ANSI A118.12 and ANSI A118.10\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"NAC Products","offers":[{"title":"Default Title","offer_id":51329783300370,"sku":"010013675","price":247.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/nac-ecb-75-crack-insolation-membrane-225-sfroll--33298_00.webp?v=1774465427"},{"product_id":"010013600-nac-ecb-membrane","title":"NAC ECB Classic Crack Isolation Membrane (150 sf\/roll)","description":"\u003ch2\u003eNAC ECB Classic Crack Isolation Membrane (150 sf\/roll)\u003c\/h2\u003e\n\u003cp\u003eECB Classic protects for up to 3\/8\" of lateral substrate movement. Available in 3' x 50' rolls (150 sf) for full floor coverage and soft joint relocation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eFor full floor coverage and soft joint relocation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProtects up to 3\/8\" lateral movement\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuitable for interior and exterior use\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e40 mil thick (approx. 1\/16\") sheet applied membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe base layer of polymer-modified elastomers, permanently laminated to a unique \"stress flex\" fiber sheet\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSelf-adhering Elastomeric Crack Bridging (ECB) anti-fracture membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEliminates the need to cut tile to meet control\/cold joints\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces live and dead load failures, protects against reflective cracking and delamination\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSafely covers asbestos flooring and provides an effective barrier against radon and mold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eTotal roll weight: 52 lbs.\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTile can be installed the same day as the membrane\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWorks with radiant-heated floors and tile-warming systems\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRoll Size: 3' x 50' rolls (150 sf)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eResists MVT up to 10#\/1000 SF\/24hrs when used with NAC TAC or NS97 primer and 7#\/1000 SF\/24hrs when used with NAC TAC II\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMeets ANSI A118.12 and ANSI A118.10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NAC Products","offers":[{"title":"Default Title","offer_id":51329783529746,"sku":"010013600","price":226.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/nac-ecb-classic-crack-isolation-membrane-150-sfroll--33299_00.webp?v=1774464994"},{"product_id":"020020150-nac-strataflex","title":"NAC Strataflex Waterproofing Membrane (150 sf\/Roll)","description":"\u003ch2\u003eNAC Strataflex Waterproofing Membrane (150 sf\/roll)\u003c\/h2\u003e\n\u003cp\u003eStrataflex features a 2\" double stick lap joint that creates a watertight seal for superior waterproof protection and provides up to 3\/8\" crack isolation protection. Available in 3' x 50' rolls (150 sf).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003e40 mil. thick (approx. 1\/16\") sheet membrane designed for use under interior or exterior floor surfaces that require waterproof protection\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFeatures a 2\" double stick lap joint that creates a watertight seal and is the ultimate solution for applications that require waterproofing, such as apartments, condominiums, hotels, restaurants, malls, high-rise office buildings, bathrooms, kitchens, and any commercial or residential installations\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eDouble stick lap joint for easy application\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProtects against reflective cracking and delamination\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuitable for interior and exterior use\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces live and dead load failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eSafely covers asbestos flooring and provides an effective barrier against radon and mold\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTotal roll weight 52 lbs\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEliminates the need to cut tile to meet control\/cold joints\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRoll Size: 3' x 50' rolls (150 sf)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSelf-bonding, self-seaming, and self-healing formula\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProtection for up to 3\/8” of lateral substrate movement.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NAC Products","offers":[{"title":"Default Title","offer_id":51329783759122,"sku":"020020150","price":236.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/nac-strataflex-waterproofing-membrane-150-sfroll--33305_00.webp?v=1774463366"},{"product_id":"020020190-nac-sam-3-sound","title":"NAC SAM 3 Sound Abatement\/Crack Isolation Membrane (150 SF\/Roll)","description":"\u003ch2\u003eNAC SAM 3 Sound Abatement\/Crack Isolation Membrane (150 SF\/Roll)\u003c\/h2\u003e\n\u003cp\u003eSAM-3 is a 90 mil thick (1\/8\") sound-deadening sheet membrane designed to reduce airborne (STC) and impact (IIC) sound transmission in applications with or without a sound-rated ceiling assembly (SRCA). SAM3 is an ideal solution for applications requiring integrated sound reduction with a low-profile installation, such as apartments, condominiums, classrooms, multi-family housing, hotels, high-rise office buildings, media rooms, children’s play areas, and other areas needing sound reduction\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eSuitable for interior and exterior use\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMeets ANSI A118.10, A118.12, A118.13\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProtects against reflective cracking and delamination\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIndependent Sound Tested IIC = 70 min STC=67 min\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuitable for interior and exterior use\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eResists Moisture Vapor (MVT) 10#\/1000SF\/24HRS when used with NAC TAC or NS97 Primer or 7#\/1000SF\/24HRS when used with NAC TAC II Primer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eA low-profile membrane is a moisture barrier and provides crack isolation up to 3\/8”.\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSafely covers asbestos flooring and provides an effective barrier against radon and mold\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTotal roll weight 82 lbs\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEliminates the need to cut tile to meet control\/cold joints\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eNo need to remove old floors or recess new ones\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRoll Size: 3 ft. x 50 ft. (150 sf)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSelf-bonding, self-seaming, and self-healing formula\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWorks with radiant-heated floors and tile-warming systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NAC Products","offers":[{"title":"Default Title","offer_id":51329784054034,"sku":"020020190","price":276.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/nac-sam-3-sound-abatementcrack-isolation-membrane-150-sfroll--33307_00.webp?v=1774465793"},{"product_id":"usg-uncoupling-mat-355-roll","title":"USG Durock Brand Uncoupling Mat - 355 sq. ft. Roll","description":"\u003ch2\u003eUSG Durock Brand Uncoupling Mat - 355 sq. ft. Roll\u003c\/h2\u003e\n\u003cp\u003eA waterproof underlayment membrane helps suppress the transfer of lateral movement in a subfloor to preserve the integrity of the tile installation.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRoll size: 43\" x 98' (1.1m x 30m)\u003c\/li\u003e\n\u003cli\u003eProvides uncoupling, waterproofing, and vapor management of the substrate\u003c\/li\u003e\n\u003cli\u003eLighter, thinner alternative to 1\/4\" tile underlayment panels\u003c\/li\u003e\n\u003cli\u003eA low-density core helps keep the membrane flat during installation\u003c\/li\u003e\n\u003cli\u003eRot-proof and resistant to solvents and alkalis\u003c\/li\u003e\n\u003cli\u003eCeramic tile installation can take place immediately after the membrane is installed\u003c\/li\u003e\n\u003cli\u003eApproved for use with modified and unmodified mortars\u003c\/li\u003e\n\u003cli\u003eThis mat is an LDPE film with a spun bond polypropylene non-woven fabric on the top side and a needle-punched polypropylene fleece on the bottom side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIn interior and exterior* applications for both residential and commercial floors\u003c\/li\u003e\n\u003cli\u003eTo renovate older floors to address existing in-plane cracks in the subfloor\u003c\/li\u003e\n\u003cli\u003eTo diminish the transfer of stresses beneath the flooring associated with expansion and contraction between different substrate materials\u003c\/li\u003e\n\u003cli\u003eTo protect in-plane lateral movement in industry-approved plywood or oriented strand board (OSB) floors from transferring to the finished floor\u003c\/li\u003e\n\u003cli\u003eAccelerate construction timelines requires installing tile over green concrete slabs before the recommended 28-day cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete, lightweight concrete\u003c\/li\u003e\n\u003cli\u003eTile backer boards such as USG Durock Brand Cement Board and Fiberock Brand Tile Backerboard\u003c\/li\u003e\n\u003cli\u003eGreen concrete\u003c\/li\u003e\n\u003cli\u003eExterior-grade plywood and APA Sturd-I-Floor, Exposure 1 OSB (interior use only)\u003c\/li\u003e\n\u003cli\u003eGypsum underlayments such as USG Levelrock Brand\u003c\/li\u003e\n\u003cli\u003eCement mortar beds, self-leveling underlayment, and leveling coats\u003c\/li\u003e\n\u003cli\u003eProperly prepared cement terrazzo (interior only)\u003c\/li\u003e\n\u003cli\u003eRadiant heat systems\u003c\/li\u003e\n\u003cli\u003eProperly prepared existing vinyl flooring such as VCT, LVT\/LVP, and non-cushioned paper-backed\/felt-backed sheet vinyl\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eConforms to ANSI A118.10 American National Standard Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimensional Stone Installation and ANSI A118.12 American National Standard Specifications for Crack Isolation Membranes for Thinset Ceramic Tile and Dimension Stone Installation\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- DYNAMIC TABLE w\/ Models --\u003e\n\u003ctable class=\"cd-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"top\"\u003e\n\u003ctd class=\"cd-table-2\" colspan=\"2\"\u003e\u003cb\u003eTechnical Data\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003eThickness\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003e1\/8\" (3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003eSeam strength\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003e\u0026gt;8 lbs\/inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003eBreaking strength\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003e\u0026gt;170 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003eShear strength\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003e\u0026gt;50 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003ePoint load\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003e\u0026gt;1000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003eCrack resistance\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003eNo failure up to 1\/8\" opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cd-table-2\"\u003e\n\u003ctd class=\"cd-table-2\"\u003eFungus and microorganism resistance\u003c\/td\u003e\n\u003ctd class=\"cd-table-2\"\u003eNo mold growth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"USG Durock","offers":[{"title":"Default Title","offer_id":51329780384018,"sku":"170007","price":340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/usg-uncoupling-mat-355-roll--32734_01.webp?v=1774464996"},{"product_id":"sikatile-700-sound-shield-pns","title":"SikaTile - 100 sq. ft. 700 Sound Shield PNS Crack Isolation Sheet Membrane","description":"\u003ch2\u003eSikaTile - 700 Sound Shield PNS Crack Isolation Sheet Membrane - 100 sq. ft.\u003c\/h2\u003e\n\u003cp\u003eSikaTile-700 Sound Shield PNS is a 90-millimeter (2.3 mm) thin, flexible, self-bonding, fabric-reinforced, load-bearing membrane that reduces sound transmission and isolates ceramic and natural stone tiles from cracks in the substrate. It is suitable for both full and partial coverage applications and minimizes impact and airborne sound transmission through floors when installed under ceramic tile, stone, or wood floor coverings.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCrack Isolation to 3\/8”\u003c\/li\u003e\n\u003cli\u003eReduces Sound Transmission\u003c\/li\u003e\n\u003cli\u003eMoisture Vapor Barrier up to 5 lbs. per 1,000 sq. ft. in 24 hours\u003c\/li\u003e\n\u003cli\u003eInterior or exterior\u003c\/li\u003e\n\u003cli\u003eIt is ideal for multi-family or multi-story buildings to reduce noise transmission through floors\u003c\/li\u003e\n\u003cli\u003eMold and mildew-resistant\u003c\/li\u003e\n\u003cli\u003eDimensions 3 ft. x 33 ft. roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic Tile and Stone\u003c\/li\u003e\n\u003cli\u003eCement Backer Board\u003c\/li\u003e\n\u003cli\u003eCement Mortar Beds (cured)\u003c\/li\u003e\n\u003cli\u003eCement Plaster\u003c\/li\u003e\n\u003cli\u003eCement Terrazzo\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eExterior Grade Plywood (interior use only)\u003c\/li\u003e\n\u003cli\u003eConcrete Masonry\u003c\/li\u003e\n\u003cli\u003eLightweight Gypsum Concrete (interior use only)\u003c\/li\u003e\n\u003cli\u003eSikaLevel Products\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":51329796931858,"sku":"653898","price":164.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/sikatile-700-sound-shield-pns--35217_01.webp?v=1774466630"},{"product_id":"ardex-tlt-704-90-inside-corner","title":"Ardex TLT 704 90° Inside Corners","description":"\u003ch2\u003eArdex TLT 704 90° Inside Corners\u003c\/h2\u003e\n\u003cp\u003eConstructed as a single piece from seamless material, it eliminates the potential of weak points in time-consuming jobsite-cutting techniques. They offer convenience and peace of mind, knowing every corner is safe from water infiltration.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eSold in a 2-pack\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e90° Inside Corner\u003c\/li\u003e\n\u003cli\u003e5 mil thickness\u003c\/li\u003e\n\u003cli\u003eThis item features a modified polyethylene (PEVA) core with a non-woven polypropylene on both sides.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329809645842,"sku":"40058","price":20.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-tlt-704-90-inside-corner--38293_01.webp?v=1774464042"},{"product_id":"schluter-kerdi-kereck-full-kit","title":"Schluter KERDI-KERECK Kit 2in + 1 Right\/1 Left Bench Corner","description":"\u003ch2\u003eSchluter KERDI-KERECK Kit - 2 Inside, 1 Right + 1 Left Bench Corners\u003c\/h2\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eSeamless corners made for waterproofing inside and outside corners of KERDI, KERDI-BOARD, and DITRA assemblies\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eDesigned for waterproofing the 135-degree angles between triangular shower benches and the wall\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAlso, work to waterproof the tops of curbs in neo-angle showers\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e4 mil thickness helps minimize build-up in the corners\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePrevents leaks and mold-growth\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUse where corner shower benches and walls meet\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCompatible with Schluter SB41 Triangular Shower Bench as well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eOne (1) right bench corner\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eOne (1) left bench corner\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTwo (2) 135° inside corners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cbr\u003e \u003c\/h3\u003e\n\u003ch4\u003eWhich side of KERDI goes against the wall?\u003c\/h4\u003e\n\u003cp\u003eKERDI membrane does not have a front\/back to it. One side of the membrane can feature printed gridlines for assistance with cutting\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003ch4\u003eWhy can't you use a modified Thinset with Kerdi?\u003c\/h4\u003e\n\u003cp\u003eModified thin-set mortars aren't recommended for use with Kerdi because they must dry out to gain strength, whereas the membrane inhibits drying, which can lead to unpredictable results.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329803256082,"sku":"KERSB135K","price":61.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-kerdi-kereck-full-kit--37817_01.webp?v=1774466105"},{"product_id":"ardex-tlt-713-pipe-collar","title":"Ardex TLT 713 Pipe Collar","description":"\u003ch2\u003eArdex TLT 713 3\/4\" Pipe Collar\u003c\/h2\u003e\n\u003cp\u003eDesigned to seal pipe protrusions and are used around supply lines to showerheads, handheld wands, jets, and spray and steam heads. They act as an anti-fracture membrane between substrates and hard surface coverings.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003ePackaged and sold individually\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e3\/4\" (20mm) Pipe Collar\u003c\/li\u003e\n\u003cli\u003e5 mil thickness\u003c\/li\u003e\n\u003cli\u003eThis item features a modified polyethylene (PEVA) core with a non-woven polypropylene on both sides.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329811775762,"sku":"40067","price":9.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-tlt-713-pipe-collar--38301_01.webp?v=1774463486"},{"product_id":"ardex-tlt-714-mix-valve-collar","title":"Ardex TLT 714 Mix Valve Collar","description":"\u003ch2\u003eArdex TLT 714 4 1\/2\" Mix Valve Collar\u003c\/h2\u003e\r\n\u003cp\u003eDesigned to seal pipe protrusions and are used around supply lines to showerheads, handheld wands, jets, and spray and steam heads. They act as an anti-fracture membrane between substrates and hard surface coverings.\r\n\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003ch3\u003eFeatures\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cb\u003ePackaged and sold individually\u003c\/b\u003e\u003c\/li\u003e\r\n\u003cli\u003e4 1\/2\" (114mm) Mix Valve Collar\u003c\/li\u003e\r\n\u003cli\u003e5 mil thickness\u003c\/li\u003e\r\n\u003cli\u003eThis item features a modified polyethylene (PEVA) core with a non-woven polypropylene on both sides.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329812234514,"sku":"40068","price":13.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-tlt-714-mix-valve-collar--38302_01.webp?v=1774465796"},{"product_id":"blanke-aqua-shield-outside-corner","title":"Blanke Aqua Shield Outside Corner","description":"\u003ch2\u003eBlanke Aqua Shield Outside Corner\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eBlanke AQUA SHIELD is a thin waterproofing fabric that can be applied with thin-set mortar to dry, flat, and structurally sound surfaces. Tile can be installed immediately on fabric without the cure time required for liquid-applied products. In addition to waterproofing, the Blanke AQUA SHIELD forms a vapor barrier, making it ideal for steam rooms and saunas. A wide range of convenient accessories is available, such as the Blanke AQUA CORN-I and CORN-A for corners, BLANKE AQUA SA, a self-adhesive tape for a quick, convenient taping of seams, and the BLANKE AQUA SEAL, a waterproof polymer adhesive for sealing seams and preformed corners.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eLightweight waterproofing fabric\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eNo waiting to install tile\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuperior tensile strength\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuperior workability\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCrack isolation properties\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSuitable for interior and exterior applications\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eResistant to saline solutions, acids, alkaline solutions, many organic solvents, alcohol, and oils\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eResistant to micro-organisms, deterioration, and rot\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWaterproofing walls and floors in bathrooms; showers, saunas, locker rooms, and exterior decks, patio, balcony, and terraces not over occupied space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions for Installing Blanke Aqua Shield Outside Corner\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eThe substrate must be clean, flat, dry, and load-bearing. Priming the substrate is recommended\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eTreat drains, pipe surrounds, corners, wall-to-wall connections, and wall-to-floor connections first per directions given in BLANKE AQUA SHIELD Installation Instructions\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApply the thin-set to the substrate by using a 1\/4” x 3\/16” V-notched trowel\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePress BLANKE AQUA CORN A into the thin-set by using the flat side of the trowel, ensuring 100% contact with the substrate\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMake sure to press out any air pockets\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIn applications subjected to constant and highly moist conditions, use BLANKE AQUA SEAL waterproofing adhesive to seal the overlapped seams.\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eFlatten out any excess BLANKE AQUA SEAL at the connections of corners and bands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates for Bonding:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePlywood, drywall, backer board, cement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eTechnical Data\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eMaterial: Polyethylene film with a fleece glued to the top and bottom\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThickness of the PE Film: approx. 0.2 mm (approx. 0,008 inches)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWidth\/in: 4 inches\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blanke","offers":[{"title":"Default Title","offer_id":51329798308114,"sku":"540-900","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/blanke-aqua-shield-outside-corner--34673_01.webp?v=1774465008"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/collections\/Waterproof-Uncoupling-Membranes.webp?v=1751406457","url":"https:\/\/www.contractorsdirect.com\/collections\/waterproof-membranes.oembed?page=4","provider":"Contractors Direct","version":"1.0","type":"link"}