{"title":"Uncoupling Membranes","description":"\u003cp\u003eUncoupling membranes let tile move independently of the substrate to help prevent cracking. Shop options from Schluter Systems, Compotite, Laticrete and Roberts, including heated-floor membranes.\u003c\/p\u003e","products":[{"product_id":"schluter-ditra-dh5ma-heat","title":"Schluter Ditra-Heat 3' 3\" x 2' 7\" Uncoupling \u0026 Waterproofing Sheet","description":"\u003ch2\u003eSchluter Ditra-Heat 8.4 sq\/ft Uncoupling \u0026amp; Waterproofing Sheet\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eUncoupling and waterproofing membrane designed to secure Ditra-Heat heating cable in place. Provides uncoupling to neutralize shear stresses between the substrate and the tile covering to prevent cracked tile and grout. The cut-back stud structure of the membrane holds the heating cable in place without the use of clips or fasteners.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates the need for a self-leveling compound which minimizes the assembly thickness and allows for quicker installation\u003c\/li\u003e\n\u003cli\u003eSheet dimensions 3'2-5\/8\" X 2'7-3\/8\" = 8.4 sq ft. (0.78 m\u003csup\u003e2\u003c\/sup\u003e)\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Ditra-Heat heating cables\u003c\/li\u003e\n\u003cli\u003eSold by the sheet, Made of polypropylene\u003c\/li\u003e\n\u003cli\u003eMembrane is 1\/4\" thick\u003c\/li\u003e\n\u003cli\u003eInstalls with thinset\u003c\/li\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDo you need to wait for DITRA to dry before tiling?\u003c\/h3\u003e\n\u003cp\u003eOnce the membrane has been installed and the heating cables have been embedded within the membrane and tested, the tile can be installed right away. No need to wait for the thin-set mortar to cure.\u003c\/p\u003e\n\u003ch3\u003eDoes DITRA-HEAT warm the room?\u003c\/h3\u003e\n\u003cp\u003eWhile this product does offer some radiant heat that contributes to the overall comfort of the space, it is not designed to be a primary heating source for the entire room. Its main function is to provide a floor-warming solution, creating a pleasant and inviting floor surface, especially during colder months.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329756365074,"sku":"DH5MA","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-dh5ma-heat--23847_01.webp?v=1774466396"},{"product_id":"schluter-ditra-xl-membrane","title":"Schluter Ditra Mat XL Uncoupling Membrane \u0026 Waterproofing Roll","description":"\u003ch2\u003eSchluter Ditra Mat XL Uncoupling Membrane \u0026amp; Waterproofing Roll\u003c\/h2\u003e\n\u003cp\u003ePolyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 ft. 3\" x 53' 3\" = 175 sq ft. (1 m x 16.25 m = 16.25 m\u003c\/li\u003e\n\u003cli\u003eProvide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface\u003c\/li\u003e\n\u003cli\u003eIn conjunction with tile coverings, forming an uncoupling, waterproofing, and vapor management layer while providing support load distribution\u003c\/li\u003e\n\u003cli\u003eThe combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood\/OSB, concrete, gypsum, heated floors, etc\u003c\/li\u003e\n\u003cli\u003e5\/16\" - (7 mm) thick allows even transitions between tile and 3\/4\" thick hardwood flooring\u003c\/li\u003e\n\u003cli\u003eFor ceramic tile application over single-layer plywood\/OSB subfloors on joists spaced up to 24\" (610 mm) o.c\u003c\/li\u003e\n\u003cli\u003eDITRA allows for ceramic tile application over single-layer plywood or OSB subfloors on joists spaced up to 19.2\" (488 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat is the difference between DITRA and DITRA-XL?\u003c\/h4\u003e\n\u003cp\u003eSchluter-Ditra-XL provides the same four essential functions as Schluter-Ditra: uncoupling, waterproofing, vapor management, and support\/load distribution. However, XL is 5\/16-inch thick, whereas Ditra is 1\/8-inch thick.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eWhat are some of the primary characteristics of Schluter DITRA XL\u003c\/h4\u003e\n\u003cp\u003eThe square-shaped cavities on the underside of DITRA XL allow for even load distribution across the tile covering. This feature is particularly beneficial when installing large-format tiles and stone. DITRA XL also comes in larger roll sizes, which can make the installation process more efficient\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329750630674,"sku":"DITRA-XL\/175","price":411.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-xl-membrane--23782_01.webp?v=1774465408"},{"product_id":"schluter-ditra-heat-dh5-12m","title":"Schluter Ditra-Heat Uncoupling \u0026 Waterproofing Membrane","description":"\u003ch2\u003eSchluter Ditra-Heat Uncoupling Roll 134.5 sq. ft\u003c\/h2\u003e\n\u003cp\u003eUncoupling and waterproofing membrane designed to secure Ditra-Heat heating cable in place. It provides uncoupling between tile and substrate to neutralize shear stresses that can lead to cracked tile and grout over time.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eEliminates the need for a self-leveling compound, which minimizes the assembly thickness and allows for quicker installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eRoll dimensions are 3 ft. 3\" width x 41 ft. 1\" length\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCovers 134.5 sq. ft\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eDesigned for use with Ditra-Heat heating cables\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSold by the roll\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMembrane is 1\/4 in. thick\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eInstalls with thin-set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eDo you need to wait for DITRA to dry before tiling?\u003c\/h4\u003e\n\u003cp\u003eOnce the DITRA-HEAT membrane has been installed, the heating cables embedded within it have been tested, and the tile can be installed right away. There is no need to wait for the thin-set mortar to cure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eDoes DITRA-HEAT warm the room?\u003c\/h4\u003e\n\u003cp\u003eWhile DITRA-HEAT does offer some radiant heat that contributes to the overall comfort of the space, it is not designed to be a primary heating source for the entire room. Its principal function is to provide a floor-warming solution, creating a pleasant and inviting floor surface, especially during colder months.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329751089426,"sku":"DH512M","price":383.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-heat-dh5-12m--23787_01.webp?v=1774459883"},{"product_id":"ardex-flexbone-heat-mat","title":"Ardex FLEXBONE Heat UH 900 In-Floor Heating \u0026 Uncoupling Membrane","description":"\u003ch2\u003eArdex FLEXBONE Heat UH 900 In-Floor Heating \u0026amp; Uncoupling Membrane\u003c\/h2\u003e\n\u003cp\u003eFLEXBONE HEAT Membrane is a 3-in-1 floor heating, uncoupling, and waterproofing membrane designed with floor heating cables for a uniformly heated tile or stone floor. The unique crossbones design pattern provides an easy template for laying floor heating cables, creating fewer touch points between the cable and the membrane for more efficient heating. The FLEXBONE floor heating cable system can only work with wood, laminate vinyl tile, or carpet flooring when using K 60 ARDITEX Rapid Setting Latex Smoothing and Leveling Compound. ​​​​​​​​​​\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003e1\/4″ (6 mm) Mat – 39″ wide x 41′ long (1 m wide x 12.5 m long) roll\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCoverage of 134.5 sq. ft. (12.5 sq. m) per roll\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUnique crossbones design allows for pre-filling of the membrane in just one pass or mortar or approved self-leveling underlayment to more securely encase heat cables\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe heating cable must be spaced so that at least two crossbones patterns are between the cables (approx. 3.88” \/ 9.8 cm)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt can also be installed in a \"comfort\" setup with at least 3 crossbones patterns between cables\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt can be used as a waterproofing membrane in bathrooms and other wet areas\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt can be used as an uncoupling membrane to prevent grout joint and tile damage from substrate movements\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMust use SK-175 Waterproofing Seam Tape on seams between adjacent mats\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIdeal for use with large format tile and stone installations\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMinimal roll memory – rolls out flat every time!\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSingle-Source, Complete System Solution\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e10-Year system warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ardex","offers":[{"title":"Default Title","offer_id":51329761837330,"sku":"30076","price":276.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/ardex-flexbone-heat-mat--27574_01.webp?v=1774460071"},{"product_id":"laticrete-strata-heat-mats","title":"Laticrete Strata Heat Mat - 161 Sq Ft.","description":"\u003ch2\u003eLaticrete Strata Heat 161 Sq Ft. Mat\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIt's a new and improved version!\u003c\/strong\u003e Strata_Heat Mat takes the comfort of floor heating wire with the advantages of an uncoupling membrane, making a well-laid floor heating system that any homeowner will love! Strata_Heat will provide faster drying of the mortar, allowing for a shorter time to grout. Just like our other uncoupling membranes, it is specifically designed for use with both modified and unmodified mortars\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved bond strength compared to the older 150 sq ft roll\u003c\/li\u003e\n\u003cli\u003eImproved point load capacity and overall durability\u003c\/li\u003e\n\u003cli\u003eUse Strata_Heat wire, mat, and thermostats to provide luxury and comfort in your home\u003c\/li\u003e\n\u003cli\u003eDifferent variations of spacing are offered to give you the level of comfort and coverage you want\u003c\/li\u003e\n\u003cli\u003eUsing Laticrete Strata Heat Mat - 161 Sq Ft. during installation will create a mechanical bond between the mat and adhesive mortar, which allows the mortar to cure faster, providing a stronger bond of tile for faster time to grout\u003c\/li\u003e\n\u003cli\u003eMat provides vapor management\u003c\/li\u003e\n\u003cli\u003eThe uncoupling membrane takes away the stress from the tile installation, which eliminates substrate cracks of up to 1\/8\"\u003c\/li\u003e\n\u003cli\u003eWhen laying the mat, the installer will be able to see mortar coverage underneath the mat without having to move it\u003c\/li\u003e\n\u003cli\u003eThe mat makes tile installation clear and precise, with an easily visible surface to lay chalk or other preferred tile setting accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSuitable Substrates\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eMortar bed\u003c\/li\u003e\n\u003cli\u003eOriented strand board (OSB)\u003c\/li\u003e\n\u003cli\u003eExterior glue plywood\u003c\/li\u003e\n\u003cli\u003eCement backer board\u003c\/li\u003e\n\u003cli\u003eCement terrazzo\u003c\/li\u003e\n\u003cli\u003eResilient flooring\u003c\/li\u003e\n\u003cli\u003eExisting tile or stone\u003c\/li\u003e\n\u003cli\u003eGypsum underlayment or lightweight concrete\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch4\u003eIs the Laticrete Strata mat waterproof?\u003c\/h4\u003e\n\u003cp\u003eSTRATA_MAT is not intended for use as a waterproofing membrane. It is not for worn surfaces; it must be covered with tile.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eCan you use Strata heat in a shower?\u003c\/h4\u003e\n\u003cp\u003eYes, however, showers may only have 120V systems. When installing a STRATA_HEAT™ Wire system in a shower, it must be placed between two non-combustible materials\u003c\/p\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329782874386,"sku":"0179-0161-H","price":306.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/laticrete-strata-heat-mat-161-sq-ft--32967_001.webp?v=1777299204"},{"product_id":"mapeheat-membrane-sheet","title":"Mapeheat 9 sq. ft. (2' 9\" x 3' 3\") Nuheat Mat","description":"\u003ch2\u003eMapeheat 9 sq. ft. (2' 9\" x 3' 3\") Membrane Sheet\u003c\/h2\u003e\n\u003cp\u003eMapeheat Membrane offers an integrated uncoupling, waterproofing, and heating roll membrane that can be used over such subfloors as plywood and concrete. Once the Mapeheat Cable is installed, you can begin tiling with thin-set mortar right away.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2' 9\" x 3' 3\" (0.84 x 1.0 m) covers 9 sq. ft. (0.84 m²)\u003c\/li\u003e\n\u003cli\u003eMembrane channels are designed for Mapeheat 120\/240 Volt heating cables to snap into place for a secure floor warming installation\u003c\/li\u003e\n\u003cli\u003eAvailable in 2 different roll lengths\u003c\/li\u003e\n\u003cli\u003eReplaces plywood and cement board as tile underlayment\u003c\/li\u003e\n\u003cli\u003eProvides crack isolation and waterproofing\u003c\/li\u003e\n\u003cli\u003eAccepts use of polymer-modified mortars for tile setting\u003c\/li\u003e\n\u003cli\u003eReceives an “Extra Heavy” rating in the Robinson Floor Test (ASTM C627)\u003c\/li\u003e\n\u003cli\u003eProvides heat under tile in targeted areas such as kitchens and bathrooms\u003c\/li\u003e\n\u003cli\u003eEasily installed on top of subfloor with thinset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e A professional tile setter or licensed electrician must install the Mapeheat Cable onto the subfloor.\nA licensed electrician must connect a Mapeheat floor-heating system to household wiring.\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":51329776615698,"sku":"2855925","price":33.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/mapeheat-membrane-sheet--31321_01.webp?v=1774467527"},{"product_id":"laticrete-strata-heat-8-6-sq-ft-mat","title":"Laticrete Strata Heat 8.6 Sq Ft. Mat","description":"\u003ch2\u003eLaticrete Strata Heat 8.6 Sq Ft. Mat\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eIt's a new and improved version!\u003c\/b\u003e Strata_Heat Mat takes the comfort of floor heating wire with the advantage of an uncoupling membrane to make a well-laid floor heating system that any homeowner will love! Strata_Heat will provide faster drying of the mortar, allowing for a shorter time to grout. Just like our other uncoupling membranes, it is specifically designed for use with both modified and unmodified mortars\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eImproved bond strength compared to the older 150 sq ft roll\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eImproved point load capacity and overall durability\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUse Strata_Heat wire, mat, and thermostats to provide luxury and comfort in your home\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eDifferent variations of spacing are offered to give you the level of comfort and coverage you want\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eUsing Strata_Heat Mat during installation will create a mechanical bond between the mat and adhesive mortar, which allows the mortar to cure faster, providing a stronger bond of tile for faster time to grout\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMat provides vapor management\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe uncoupling membrane takes away the stress from the tile installation, which eliminates substrate cracks of up to 1\/8\"\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eWhen laying the mat, the installer will be able to see mortar coverage underneath the mat without having to move it\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe mat makes tile installation clear and precise, with an easily visible surface to lay chalk or other preferred tile setting accessories\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e\u003cb\u003eSold individually. Discount for purchasing in quantities of 10\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSuitable Substrates\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eConcrete\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eMortar bed\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eOriented strand board (OSB)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eExterior glue plywood\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCement backer board\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eCement terrazzo\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eResilient flooring\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eExisting tile or stone\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eGypsum underlayment or lightweight concrete\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":51329783070994,"sku":"0179-5082-H","price":41.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/laticrete-strata-heat-8-6-sq-ft-mat--32977_01.webp?v=1774460143"},{"product_id":"schluter-ditraheat-duo-roll","title":"Schluter Ditra Heat Duo 3' 3\" x 33'  Membrane Roll","description":"\u003ch2\u003eSchluter Ditra Heat Duo 3' 3\" x 33' Membrane Roll\u003c\/h2\u003e\n\u003cp\u003eAn uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control and a thermal break. These rolls cover large areas when installing floor heating cables to create a warm, luxurious tile floor.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g., LVT)\u003c\/li\u003e\n\u003cli\u003eReduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction\u003c\/li\u003e\n\u003cli\u003eReduces heat loss to the substrate for up to 70% faster heat-up times over concrete during temperature increase demands\u003c\/li\u003e\n\u003cli\u003eNominal 5\/16\" (8mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings\u003c\/li\u003e\n\u003cli\u003eSelf-leveling compounds are not required to encapsulate the cables into the membranes\u003c\/li\u003e\n\u003cli\u003eThe stud structure of DITRA-HEAT-DUO is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install, and few tools are required\u003c\/li\u003e\n\u003cli\u003ePatent pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat are the spacing requirements for DITRA-heat?\u003c\/h4\u003e\n\u003cp\u003eStandard cable spacing between runs is 3 studs. However, the cable may also be spaced continuously at 3 – 2 stud intervals in isolated areas or over the floor.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eDoes DITRA prevent tile from cracking?\u003c\/h4\u003e\n\u003cp\u003eThe rib structure allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the primary cause of cracking and delaminating of the tiled surface.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329776255250,"sku":"DHD810M","price":442.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditraheat-duo-roll--30532_01.webp?v=1774460224"},{"product_id":"schluter-ditra-heat-duo-sheet","title":"DHD8MA Schluter DITRA-HEAT DUO 3' 3\" x 2' 7\" (8.6 sq. ft.) Membrane Sheet","description":"\u003ch2\u003eSchluter DITRA-HEAT DUO 3' 3\" x 2' 7\" (8.6 sq. ft.) Membrane Sheet\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eSchluter DITRA-HEAT-DUO is an uncoupling and waterproofing membrane with an integrated bonding fleece that provides sound control and a thermal break. DITRA-HEAT-DUO sheets are helpful when working in a room with a problematic layout when installing floor heating cables to create a warm, luxurious tile floor.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eProvides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g., LVT)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces heat loss to the substrate for up to 70% faster heat-up times over concrete during temperature increase demands\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eNominal 5\/16” (8mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSelf-leveling compounds are not required to encapsulate the cables into the membranes\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe stud structure of DITRA-HEAT-DUO is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eQuick and easy to install, and few tools are required\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003ePatent pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eDo you need to wait for DITRA to dry before tiling?\u003c\/h4\u003e\n\u003cp\u003eOnce the DITRA-HEAT membrane has been installed, the heating cables embedded within it have been tested, and the tile can be installed right away. There is no need to wait for the thin-set mortar to cure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eDoes DITRA-HEAT warm the room?\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWhile DITRA-HEAT does offer some radiant heat that contributes to the overall comfort of the space, it is not designed to be a primary heating source for the entire room. Its principal function is to provide a floor-warming solution, creating a pleasant and inviting floor surface, especially during colder months.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"Default Title","offer_id":51329776681234,"sku":"DHD8MA","price":35.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-heat-duo-sheet--30533_01.webp?v=1774460243"},{"product_id":"mapeheat-floor-heat-membrane","title":"Mapeheat Floor Heat Membrane Nuheat Roll","description":"\u003ch2\u003eMapei Mapeheat Uncoupling and Waterproofing Floor Heat Membrane Roll\u003c\/h2\u003e\n\u003cp\u003eMapeheat Membrane partnered with Nuheat to offer an integrated uncoupling, waterproofing, and heating roll membrane for plywood and concrete subfloors. Once the Mapeheat Cable is installed, you can begin tiling with thin-set mortar immediately.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eMembrane channels are designed for Mapeheat 120\/240 Volt heating cables to snap into place for a secure floor warming installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAvailable in 2 different roll lengths\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReplaces plywood and cement board as tile underlayment\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProvides crack isolation and waterproofing\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAccepts use of polymer-modified mortars for tile setting\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReceives an “Extra Heavy” rating in the Robinson Floor Test (ASTM C627)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProvides heat under tile in targeted areas such as kitchens and bathrooms\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eEasily installed on top of the subfloor with a thin set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e A professional tile setter or licensed electrician must install the Mapeheat Cable onto the subfloor and connect a Mapeheat floor-heating system to household wiring.\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"3' 3\" x 16' 5\" (54 sq. ft.)","offer_id":48912505405714,"sku":"8450-54 sq ft","price":148.92,"currency_code":"USD","in_stock":true},{"title":"3' 3\" x 49' 3\" (161 sq. ft.)","offer_id":48912505438482,"sku":"8450-161 sq. ft.","price":346.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/mapeheat-floor-heat-membrane--31313_01.webp?v=1774464699"},{"product_id":"schluter-ditra-heat-duo-ps","title":"Schluter DITRA-HEAT-DUO-PS Peal \u0026 Stick Uncoupling Membrane","description":"\u003ch2\u003eSchluter DITRA-HEAT DUO Peel \u0026amp; Stick Membrane Roll\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eSchluter-DITRA-HEAT-DUO-PS is a peel-and-stick membrane with a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003ePressure-sensitive adhesive (PSA) which bonds the membrane to the substrate, eliminating the need for thin-set mortar\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eQuick and easy to install, DITRA-HEAT-DUO-PS is an uncoupling membrane with an integrated bonding fleece that provides sound control as well as a thermal break\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eProvides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g., LVT)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eReduces heat loss to the substrate for up to 70% faster heat-up times over concrete during temperature increase demands\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eNominal 5\/16\" (8mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSelf-leveling compounds are not required to encapsulate the cables into the membranes\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe stud structure of DITRA-HEAT-DUO is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIt comes in two sizes: 8.4 sq ft (0.78 m2) sheet and 108 sq ft (10 m2) roll\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e8.4 sq ft sheet dimensions: 3' 2-5\/8\" x 2' 7-3\/8\" (0.98 m x 0.80 m = 0.78 m2)\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003e108 sq ft roll dimensions: 3' 2-5\/8\" x 33' 6-1\/2\" (0.98 m x 10.20 m = 10 m2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eHow To Use\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"bullet\"\u003eRemove the transparent release film from the fleece side of the membrane to expose the layer of adhesive and embed it into the substrate\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eApply peel and stick membrane to the floor, fleece\/adhesive side down. Solidly embed the matting into the substrate using a float, screed trowel, or DITRA-ROLLER\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAbut adjacent sheets and align the studs on the top of the matting to make subsequent heating cable installation easier\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eNo thin-set required to install membrane means a faster and easier installation\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eThe membrane can easily be repositioned until pressure is exerted\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eSelf-leveling compounds are not required to encapsulate the cables into the membranes\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eIf the application area requires a membrane that meets or exceeds the requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO\u003c\/li\u003e\n\u003cli class=\"bullet\"\u003eAlternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the Schluter-KERDI membrane, which is certified to meet ANSI A118.10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat are the spacing requirements for DITRA-heat?\u003c\/h3\u003e\n\u003cp\u003eA cable spacing of 3 studs between runs is standard. However, the cable may also be spaced at continuously alternating 3 stud – 2 stud intervals in isolated areas or over the entire floor.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eDoes DITRA prevent tile from cracking?\u003c\/h3\u003e\n\u003cp\u003eThe rib structure allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the primary cause of cracking and delaminating of the tiled surface.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"8.4 sq. ft. Sheet","offer_id":48913076093202,"sku":"2022-8.4 sq.ft.","price":44.96,"currency_code":"USD","in_stock":true},{"title":"108 sq. ft. Roll","offer_id":48913076125970,"sku":"2022-108 sq.ft.","price":552.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-heat-duo-ps-peal-stick-uncoupling-membrane--43890_43890-01.webp?v=1774467254"},{"product_id":"schluter-ditra-heat-ps-membrane","title":"Schluter DITRA-HEAT-PS Peel \u0026 Stick Uncoupling Membrane","description":"\u003ch2\u003eSchluter DITRA-HEAT Peel and Stick Membrane\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eSchluter-DITRA-HEAT-PS is a peel-and-stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePressure-sensitive adhesive (PSA) which bonds the membrane to the substrate, eliminating the need for thin-set mortar\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT\u003c\/li\u003e\n\u003cli\u003eProvides electric floor warming for use beneath tile, stone, or other resilient floor coverings (e.g. LVT)\u003c\/li\u003e\n\u003cli\u003eUncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation\u003c\/li\u003e\n\u003cli\u003eSelf-leveling compounds are not required to encapsulate the cables into the membranes\u003c\/li\u003e\n\u003cli\u003eStud structure of DITRA-HEAT-PS is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables\u003c\/li\u003e\n\u003cli\u003eComes in two sizes: 8.4 sq ft (0.78 m2) sheet and 134.5 sq ft (12.5 m2) roll\u003c\/li\u003e\n\u003cli\u003e8.4 sq ft sheet dimensions: 3' 2-5\/8\" x 2' 7-3\/8\" (0.98 m x 0.80 m = 0.78 m2)\u003c\/li\u003e\n\u003cli\u003e134.5 sq ft roll dimensions: 3' 2-5\/8\" x 41' 10-3\/4\" (0.98 m x 12.76 m = 12.5 m2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch4\u003eHow To Use\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSimply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed it into the substrate\u003c\/li\u003e\n\u003cli\u003eApply peel and stick membrane to the floor, fleece\/adhesive side down. Solidly embed the matting into the substrate using a float, screed trowel, or DITRA-ROLLER\u003c\/li\u003e\n\u003cli\u003eAbut adjacent sheets and align the studs on the top of the matting to make subsequent heating cable installation easier\u003c\/li\u003e\n\u003cli\u003eNo thin-set required to install membrane means a faster and easier installation\u003c\/li\u003e\n\u003cli\u003eThe membrane can easily be repositioned until pressure is exerted\u003c\/li\u003e\n\u003cli\u003eSelf-leveling compounds are not required to encapsulate the cables into the membranes\u003c\/li\u003e\n\u003cli\u003eIf the application area requires a membrane that meets or exceeds the requirements of ANSI A118.10, please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO\u003c\/li\u003e\n\u003cli\u003eAlternatively, the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the Schluter-KERDI membrane, which is certified to meet ANSI A118.10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\nCommon Questions\n\u003ch3\u003e\n\u003cbr\u003e\n\u003ch4\u003e\nDoes DITRA prevent tile from cracking?\n\u003c\/h4\u003e\n\u003c\/h3\u003e\n\u003c\/h3\u003e\u003cp\u003e\nThe rib structure allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled\nsurface.\n\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch4\u003e\nCan you install vinyl flooring over Ditra-heat?\n\u003c\/h4\u003e\n\u003cp\u003e\nThe Schluter®-DITRA-HEAT system is suitable for applications with engineered wood, vinyl, wood plastic composite (WPC), luxury vinyl tiles (LVT), luxury vinyl planks (LVP), stone plastic composite (SPC) tiles and planks, and\nlaminate flooring. Solid hardwood flooring is not recommended in floor warming applications.\n\u003c\/p\u003e\n\n","brand":"Schluter Systems","offers":[{"title":"8.4 sq. ft. Sheet","offer_id":48913076683026,"sku":"2024-8.4 sq.ft.","price":31.14,"currency_code":"USD","in_stock":true},{"title":"134.5 sq. ft. Roll","offer_id":48913076846866,"sku":"2024-134.5 sq.ft.","price":479.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-heat-ps-peel-stick-uncoupling-membrane--43894_43894-01.webp?v=1774464783"},{"product_id":"schluter-ditra-ps-membrane","title":"Schluter DITRA Peel \u0026 Stick Uncoupling Membrane","description":"\u003ch2\u003eSchluter DITRA-PS Peel \u0026amp; Stick Uncoupling Membrane\u003c\/h2\u003e\n\u003cp class=\"description\"\u003eSchluter DITRA-PS brings the benefits of the original DITRA membrane; the multi-tasking underlayment that provides uncoupling, load distribution, waterproofing, and vapor management for durable tile installations; to a convenient peel and stick format.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePressure-sensitive adhesive (PSA) which bonds the membrane to the substrate, eliminating the need for thin-set mortar\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces installation time, labor costs, and cleanup\u003c\/li\u003e\n\u003cli\u003eOffers the same core functions as the original DITRA\u003c\/li\u003e\n\u003cli\u003eUncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation\u003c\/li\u003e\n\u003cli\u003eSuitable for use with a wide range of substrates, including concrete, OSB (including Advantech), and plywood\u003c\/li\u003e\n\u003cli\u003eIt can also be installed over various floor coverings\u003c\/li\u003e\n\u003cli\u003eComes in three sizes: 7.75 sq ft (0.72 m2) sheet and 110sqft (10m2) and 269sqft (25m2) rolls\u003c\/li\u003e\n\u003cli\u003eMembrane thickness: 1\/8\" - 3.5 mm\u003c\/li\u003e\n\u003cli\u003e7.75 sq ft sheet dimensions: 3'2-3\/4\" X 2'5\" = 7.75 SF\u003c\/li\u003e\n\u003cli\u003e110sqft roll dimensions: 3'2-3\/4\" X 34'3\/4\" = 110 SF\u003c\/li\u003e\n\u003cli\u003e269sqft roll dimensions: 3'2-3\/4\" X 83'4\" = 269 SF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eHow To Use\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003ePlease note: \u003c\/b\u003eAll substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-PS. For complete installation guidelines and warranty criteria, please refer to the Schluter-DITRA Installation Handbook\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimply remove the transparent release film from the PS membrane to expose the layer of adhesive, and embed it into the substrate\u003c\/li\u003e\n\u003cli\u003eApply peel and stick membrane to the floor, fleece\/adhesive side down. Solidly embed the matting into the substrate using a float, screed trowel, or DITRA-ROLLER\u003c\/li\u003e\n\u003cli\u003eAbut adjacent sheets and align the studs on the top of the matting to make subsequent heating cable installation easier\u003c\/li\u003e\n\u003cli\u003eNo thin-set required to install membrane means a faster and easier installation\u003c\/li\u003e\n\u003cli\u003eThe membrane can easily be repositioned until pressure is exerted\u003c\/li\u003e\n\u003cli\u003eIf the application area requires a membrane that meets or exceeds the requirements of ANSI A118.10, please refer to thin-set versions of DITRA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eMaintenance\u003c\/h4\u003e\n\u003cp\u003eStorage: DITRA-PS features a UV sensitive pressure-sensitive adhesive that should not be stored in places with prolonged exposure to direct sunlight. The PSA is also temperature sensitive and should be stored in a frost-free environment 41 - 86 °F (5 - 30 °C). If product is exposed to conditions outside of recommended temperature range, product shall be re-acclimated to range for a minimum of 24 hours. The PSA is not water soluble and is free of solvents.\u003c\/p\u003e","brand":"Schluter Systems","offers":[{"title":"7.75 sq. ft. Sheet","offer_id":51172863410450,"sku":"2025-7.75 sq-ft","price":22.3,"currency_code":"USD","in_stock":true},{"title":"110 sq. ft. Roll","offer_id":51172863443218,"sku":"2025-110 sq-ft","price":295.05,"currency_code":"USD","in_stock":true},{"title":"269 sq. ft. Roll","offer_id":51172863475986,"sku":"2025-269 sq-ft","price":682.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/schluter-ditra-peel-stick-uncoupling-membrane--58285_58285-01.webp?v=1774461391"},{"product_id":"dtb-max-10","title":"Primo Tools UltiMAX Diamond Blade","description":"\u003ch2\u003ePrimo Tools UltiMAX Diamond Blade\u003c\/h2\u003e\n\u003cp\u003eThe UltiMAX Diamond Blade is a high-quality blade perfect for cutting porcelain.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChip free and fast cutting\u003c\/li\u003e\n\u003cli\u003eSegmented blade design\u003c\/li\u003e\n\u003cli\u003eIdeal for porcelain tile, porcelain, and cement pavers\u003c\/li\u003e\n\u003cli\u003eFor wet use only\u003c\/li\u003e\n\u003cli\u003eDesigned for use with a table saw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 10\"\u003c\/li\u003e\n\u003cli\u003eArbor: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eSegment height: 10mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Primo Tools","offers":[{"title":"Default Title","offer_id":51329881964818,"sku":"DTB-MAX-10","price":113.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/dtb-max-10--58679_01.webp?v=1774462438"},{"product_id":"laticrete-hydro-ban-1","title":"Laticrete Hydro Ban 1 Waterproofing Membrane","description":"\u003ch2\u003eLaticrete Hydro Ban 1 Waterproofing Membrane\u003c\/h2\u003e\n\u003cp\u003eAnother industry first from LATICRETE, HYDRO BAN® 1 redefines waterproofing with its innovative, single-coat, trowel-applied formula. Engineered for both waterproofing and crack isolation, this advanced waterproofing solution allows installers to work faster and smarter using a trowel-on waterproofing method.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuring temperature range ≥ 35°F or higher allows it to cure in a variety of different environmental conditions and substrate temperatures\u003c\/li\u003e\n\u003cli\u003eASTM E96 Rated for steam showers and steam rooms\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI A118.10, the most widely accepted waterproofing standard\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds ANSI A118.12, providing 1\/8\" (3.175 mm) anti-fracture protection (no fabric required)\u003c\/li\u003e\n\u003cli\u003e2 to 3 Hours to flood test† so you can expedite the installation process\u003c\/li\u003e\n\u003cli\u003eExtra heavy Robinson Rating for a durable, long lasting install\u003c\/li\u003e\n\u003cli\u003eCure indicator – color changing technology gives you peace-of-mind and ease of inspection\u003c\/li\u003e\n\u003cli\u003eEquipped with Microban® antimicrobial technology to protect the waterproofing membrane HYDRO BAN® 1 can be flood tested in 2 to 3 hours when the waterproofing membrane is cured and the substrate is 70°F (21°C) and 50% RH or greater for 2 hours. The curing time period starts when the HYDRO BAN 1 color has changed from a hi-vis green to a dark shade indicating a cured liquid waterproofing membrane. If the substrate and the air temperature are lower than 70°F (21°C) and 50% RH, flood testing can not be performed until the HYDRO BAN 1 color has changed from a light to a darker shade and then 24 hours has lapsed.\u003c\/li\u003e\n\u003cli\u003eAvailable in 1, 3.5, and 5-gallon sizes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laticrete","offers":[{"title":"1 Gallon","offer_id":51620591075602,"sku":"9277-1 Gallon","price":140.16,"currency_code":"USD","in_stock":true},{"title":"3-1\/2 Gallons","offer_id":51620591108370,"sku":"9277-3-1\/2 Gallon","price":412.7,"currency_code":"USD","in_stock":true},{"title":"5 Gallons","offer_id":51620591141138,"sku":"9277-5 Gallon","price":584.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/laticrete-hydro-ban-1--61731_01.webp?v=1774467146"},{"product_id":"composeal-40-pvc","title":"Composeal Grey 40 mil PVC Waterproofing Membrane","description":"\u003ch2\u003eComposeal Grey 40 mil PVC Waterproofing Membrane\u003c\/h2\u003e\n\u003cp\u003eThe Composeal Grey 40 mil PVC Membrane is a flexible, durable shower pan liner designed for traditional thick-bed installations. It forms easily around drains and corners, providing reliable waterproofing for both new construction and renovation projects.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40 mil PVC membrane for thick-bed shower installations\u003c\/li\u003e\n\u003cli\u003eIts flexible material forms easily around drains and corners\u003c\/li\u003e\n\u003cli\u003eDurable, long-lasting waterproof protection\u003c\/li\u003e\n\u003cli\u003eSuitable for new construction and renovation projects\u003c\/li\u003e\n\u003cli\u003eAvailable in 5' and 6' widths\u003c\/li\u003e\n\u003cli\u003eAvailable in 50' and 100' rolls\u003c\/li\u003e\n\u003cli\u003eMeets and exceeds ASTM D4551 standards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compotite","offers":[{"title":"5' x 50'","offer_id":51985351770386,"sku":"CGMP-CGRY40-550","price":240.0,"currency_code":"USD","in_stock":true},{"title":"5' x 100'","offer_id":51985351803154,"sku":"CGMP-CGRY40-5100","price":457.99,"currency_code":"USD","in_stock":true},{"title":"6' x 50'","offer_id":51985351835922,"sku":"CGMP-CGRY40-650","price":289.2,"currency_code":"USD","in_stock":true},{"title":"6' x 100'","offer_id":51985351868690,"sku":"CGMP-CGRY40-6100","price":549.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/composeal-grey-40-mil-pvc-waterproofing-membrane--72460_72460-01.webp?v=1774466269"},{"product_id":"composeal-grey-20","title":"Composeal Grey 20 mil PE Waterproofing Membrane","description":"\u003ch2\u003eComposeal Grey 20 mil PE Waterproofing Membrane\u003c\/h2\u003e\n\u003cp\u003eThe Composeal Grey 20 mil PE is a lightweight, flexible waterproofing membrane for walls and floors under tile installations. Its multi-ply construction helps control moisture migration while accommodating minor substrate movement.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e20 mil, 3-ply polyethylene waterproof membrane\u003c\/li\u003e\n\u003cli\u003eLightweight and pliable for easy handling\u003c\/li\u003e\n\u003cli\u003eInstalls with thin-set mortar\u003c\/li\u003e\n\u003cli\u003eDesigned for walls and floors under tile\u003c\/li\u003e\n\u003cli\u003eHelps protect against moisture migration\u003c\/li\u003e\n\u003cli\u003eSupports long-lasting tile installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compotite","offers":[{"title":"39\" x  98'","offer_id":51985462231314,"sku":"CGWM-CGRYC20-1MX30M","price":449.99,"currency_code":"USD","in_stock":true},{"title":"79\" x  98'","offer_id":51985462264082,"sku":"CGWM-CGRYC20-2MX30M","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/composeal-grey-20-mil-pe-waterproofing-membrane--72865_72865-01.webp?v=1774463143"},{"product_id":"40-gold-membrane","title":"Composeal Gold 40 mil Membrane","description":"\u003ch2\u003eComposeal Gold 40 mil Membrane\u003c\/h2\u003e\n\u003cp\u003eComposeal Gold 40 mil is a 3-ply waterproofing and uncoupling membrane designed to protect floors and walls beneath thin-set tile or natural stone.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable sizes: 250 sq ft and 450 sq ft rolls\u003c\/li\u003e\n\u003cli\u003eProtects against substrate cracks and moisture migration\u003c\/li\u003e\n\u003cli\u003eDesigned for thin-set tile and natural stone installations\u003c\/li\u003e\n\u003cli\u003eSuitable for floors and walls in interior applications\u003c\/li\u003e\n\u003cli\u003eIdeal for bathrooms, commercial floors, balconies, and terraces\u003c\/li\u003e\n\u003cli\u003eSupports medium to high non-pressurized water exposure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compotite","offers":[{"title":"(2m x 11.61m)","offer_id":51987410026770,"sku":"CGFM-CGPE40-2250","price":422.5,"currency_code":"USD","in_stock":true},{"title":"(2m x 20.9m)","offer_id":51987410059538,"sku":"CGFM-CGPE40-2450","price":760.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/composeal-gold-40-mil-membrane--73288_73288-02.webp?v=1774463112"},{"product_id":"comp-keederoll-wt","title":"Compotite KeedeRoll WT","description":"\u003ch2\u003eCompotite KeedeRoll WT Membrane\u003c\/h2\u003e\n\u003cp\u003eKeedeRoll WT is a high-performance, watertight uncoupling membrane engineered for ceramic, porcelain, and natural stone tile installations.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e200 square foot roll\u003c\/li\u003e\n\u003cli\u003eBuilt-in seam overlap for enhanced waterproof protection\u003c\/li\u003e\n\u003cli\u003eSuperior crack isolation and point-load deflection resistance\u003c\/li\u003e\n\u003cli\u003eCompatible with both modified and unmodified mortars\u003c\/li\u003e\n\u003cli\u003eLay-Flat Technology for fast, consistent installation\u003c\/li\u003e\n\u003cli\u003eEasy to cut, handle, and install\u003c\/li\u003e\n\u003cli\u003eDesigned for residential and commercial applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compotite","offers":[{"title":"Default Title","offer_id":51990137536786,"sku":"KeedeRoll WT 200","price":245.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/compotite-keederoll-wt--73493_73493-01.webp?v=1774463102"},{"product_id":"keederoll-mt-membrane","title":"Compotite KeedeRoll MT Membrane","description":"\u003ch2\u003eCompotite KeedeRoll MT Membrane\u003c\/h2\u003e\n\u003cp\u003eKeedeRoll MT is a high load-bearing uncoupling and soundproofing membrane engineered for ceramic tile installations. Its advanced geometric profile, combined with Structured Strand technology, enables a secure, one-step bond that effectively isolates tile and grout from substrate movement.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDelivers exceptional sound and impact transmission reduction while maintaining superior structural performance.\u003c\/li\u003e\n\u003cli\u003eHelps prevent grout joint and tile damage caused by substrate movement\u003c\/li\u003e\n\u003cli\u003eRated “Extra Heavy” under the Robinson-Type Floor Test (ASTM C627)\u003c\/li\u003e\n\u003cli\u003eAchieves 21-point IIC Delta over 8\" concrete\u003c\/li\u003e\n\u003cli\u003eMeets building code requirements on 8\" concrete (54 IIC)\u003c\/li\u003e\n\u003cli\u003eBridges in-plane cracks up to 1\/8\" (3 mm) without transferring stress to tile\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compotite","offers":[{"title":"Default Title","offer_id":51990137602322,"sku":"KeedeRoll MT 200","price":245.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/compotite-keederoll-mt-membrane--73494_73494-02.webp?v=1774463140"},{"product_id":"cementitious-membrane-30lb","title":"Laticrete Hydro Ban Cementitious Waterproofing Membrane (30 lbs)","description":"\u003ch2\u003eLaticrete Hydro Ban Cementitious Waterproofing Membrane (30 lbs)\u003c\/h2\u003e\n\u003cp\u003eHYDRO BAN Cementitious Waterproofing Membrane is a one component, polymer fortified, cement based waterproofing material that mixes with water. This product can be used on walls and floors in wet areas; bathrooms, kitchens, swimming pools, water features and fountains, balconies and terraces over unoccupied space.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for use in partially tiled applications such as at waterlines, tiled swimming lanes, tiled swimming targets\u003c\/li\u003e\n\u003cli\u003eFlood testing in 2 hours at 70°F (21°C) or higher\u003c\/li\u003e\n\u003cli\u003eDoes not require the use of fabric\u003c\/li\u003e\n\u003cli\u003e80 mins of Pot Life\u003c\/li\u003e\n\u003cli\u003eCan be used under pool plasters\u003c\/li\u003e  \n\u003cli\u003eBonds directly to metal, PVC and ABS plumbing fixtures\u003c\/li\u003e\n\u003cli\u003eExtra Heavy Service rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)\n\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003cli\u003eExceeds ANSI A118.10\u003c\/li\u003e\n\u003cli\u003eRapid drying for a faster time to tile\u003c\/li\u003e\n\u003cli\u003eInstall tile, brick and stone directly onto membrane\u003c\/li\u003e\n\u003cli\u003eGREENGUARD certified, LEED compliant\u003c\/li\u003e\n\u003cli\u003eRefer to cautions section for more information on curing\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Laticrete","offers":[{"title":"Default Title","offer_id":52067250700562,"sku":"9259-0030-2","price":166.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/32740_01.webp?v=1774467475"},{"product_id":"roberts-isoguard40","title":"Roberts ISOGuard40 Crack Isolation Membrane","description":"\u003ch2\u003eRoberts ISOGuard40 Crack Isolation Membrane\u003c\/h2\u003e\n\u003cp\u003eThe Roberts ISOGuard40 is a peel-and-stick crack-isolation membrane designed to help prevent substrate movement from transferring to finished flooring.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-adhesive peel-and-stick design for quick, efficient application\u003c\/li\u003e\n\u003cli\u003eProtects lateral subfloor cracks up to 1\/4″\u003c\/li\u003e\n\u003cli\u003e40 mil thickness with a high rubber content for lasting elasticity\u003c\/li\u003e\n\u003cli\u003eSuitable for use over concrete, mortar beds, patching compounds, and cement backer boards\u003c\/li\u003e\n\u003cli\u003e150 sq. ft. roll coverage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roberts","offers":[{"title":"Default Title","offer_id":52083139281170,"sku":"72140","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/Roberts-ISOGuard40-Membrane--76241_76241-01.webp?v=1774463190"},{"product_id":"roberts-isoguard90","title":"ISOGuard90 Crack Isolation Membrane With Sound Control","description":"\u003ch2\u003eISOGuard90 Crack Isolation Membrane with Sound Control\u003c\/h2\u003e\n\u003cp\u003eThe ISOGuard90 is a high-performance peel-and-stick crack-isolation membrane engineered to provide enhanced crack suppression and integrated sound control.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-adhesive peel-and-stick design for fast, efficient installation\u003c\/li\u003e\n\u003cli\u003eIntegrated sound reduction properties\u003c\/li\u003e\n\u003cli\u003eAnticipated sound ratings in the upper 60s IIC and low 70s STC range\u003c\/li\u003e\n\u003cli\u003e90 mil thickness with high rubber content for sustained elasticity\u003c\/li\u003e\n\u003cli\u003eDesigned for use with thinsets, mortars, or adhesives when installing ceramic tile, stone, or brick\u003c\/li\u003e\n\u003cli\u003e100 sq. ft. roll coverage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roberts","offers":[{"title":"Default Title","offer_id":52083174277394,"sku":"ISO90_72140","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/Roberts-ISOGuard90-Membrane--76243_76243-01.webp?v=1774463144"},{"product_id":"triguard-lvp-underlayment","title":"Roberts TriGuard LVP Underlayment","description":"\u003ch2\u003eRoberts TriGuard LVP Underlayment\u003c\/h2\u003e\n\u003cp\u003eThe Roberts TriGuard LVP Underlayment is engineered to provide exceptional moisture protection and sound reduction for luxury vinyl flooring installations. \u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced moisture protection with WVTR rating of 0.255 grains\/m²\/24 hours\u003c\/li\u003e\n  \u003cli\u003eSound reduction performance rated at IIC 69, STC 61, and Delta 27\u003c\/li\u003e\n  \u003cli\u003e1 mm polypropylene foam construction for durability and support\u003c\/li\u003e\n  \u003cli\u003eBuilt-in mold and mildew protection for long-term reliability\u003c\/li\u003e\n  \u003cli\u003eSuitable for floating or double-glue LVP flooring installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roberts","offers":[{"title":"Default Title","offer_id":52092298690834,"sku":"70-192","price":46.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/Roberts-TriGuard-LVP-Underlayment--76240_76240-01.webp?v=1774461164"},{"product_id":"litokol-hydropad-15kg","title":"Litokol HydroPad Waterproofing Gel 15kg","description":"\u003ch2\u003eLitokol HydroPad 15kg\u003c\/h2\u003e\n\u003cp\u003eThe Litokol HydroPad is a breathable waterproofing gel designed to prepare substrates before installing tiles or natural stone.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBreathable waterproofing gel with flexible 4-Way Flex technology\u003c\/li\u003e\n\u003cli\u003eEasy application with a steel trowel, roller, or brush\u003c\/li\u003e\n\u003cli\u003eSuitable for swimming pools, exterior areas, and wet environments\u003c\/li\u003e\n\u003cli\u003eCan be applied over non-absorbent surfaces, such as existing tiles\u003c\/li\u003e\n\u003cli\u003eWorks with HydroBand Anti-Fracture accessories for continuous waterproofing\u003c\/li\u003e\n\u003cli\u003eReduced waiting time between coats and before tile installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Litokol","offers":[{"title":"Default Title","offer_id":52156518695186,"sku":"HydroPad 15kg","price":121.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/litokol-hydropad-15kg--77880_77880-01.webp?v=1774978583"},{"product_id":"litokol-safetygel","title":"Litokol SafetyGel Waterproofing Gel","description":"\u003ch2\u003eLitokol SafetyGel\u003c\/h2\u003e\n\u003cp\u003eLitokol SafetyGel is a ready-to-use elastic waterproofing gel membrane designed for waterproofing and crack isolation before tile installation.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElastic, watertight membrane for waterproofing and crack prevention\u003c\/li\u003e\n\u003cli\u003eSuitable for swimming pools, terraces, showers, and exterior areas\u003c\/li\u003e\n\u003cli\u003eReady-to-use and quick drying (rain-proof in about 2 hours)\u003c\/li\u003e\n\u003cli\u003eNo reinforcing mesh, tapes, or corner strips required\u003c\/li\u003e\n\u003cli\u003eEasy application with a roller, brush, trowel, or airless sprayer\u003c\/li\u003e\n\u003cli\u003eAdheres to difficult substrates such as existing tiles, fiberglass, PVC, metal, and wood\u003c\/li\u003e\n\u003cli\u003eCan be used with PowerGel S1+ to create the TileSafe high-adhesion anti-fracture system\u003c\/li\u003e\n\u003cli\u003eSuitable for installations on cracked substrates up to 3 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Litokol","offers":[{"title":"10kg","offer_id":52156519317778,"sku":"LSGB-SafetyGel-10kg","price":215.24,"currency_code":"USD","in_stock":true},{"title":"20kg","offer_id":52156519350546,"sku":"LSGB-SafetyGel-20kg","price":396.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0849\/8056\/4242\/files\/litokol-safetygel--77779_77779-01.webp?v=1774980163"}],"url":"https:\/\/www.contractorsdirect.com\/collections\/uncoupling-membranes.oembed","provider":"Contractors Direct","version":"1.0","type":"link"}