Electra Safe-Hete Water Heater
Product Details
Tile Saw Bucket Water Heater
Immersion water heaters for wet tile saws, buckets, pails, sinks and small tanks keep your hands warm when the weather gets cold!
Features
- Quality heater made in the USA
- GFCI adapter recommended
- Heats 1 gallon of water to 90°F in 10 minutes
- 5" heater is small and compact and fits in the water pans of most wet tile saws
- 10-1/2" heater works best in buckets, pails, and other larger containers
- If not submerged in water, these heaters automatically shut-off
- Insulated handle for safe handling
- Just insert water heater and remove when desired temperature is reached
- Heaters have an internal protector that disconnects power in 2 to 3 minutes if the heater is operated outside of water
- Cord length: 5-1/2 ft
- Base height: 1-1/4"
- Minimum liquid level: 1-1/2"
- Element material is Incoloy, the outer housing is aluminum
Please note that these tile saw water heaters are not intended to heat more than 5 gallons of water
7 questions
What is the diameter of the heating ring on these bucket water heaters?
by John H. 10/27/2015 3:40:05 pm
The circular heating plate is 5'' in diameter.
What is the height of the heating ring?
by John H. 10/27/2015 3:40:05 pm
The height of the heating ring is 1''.
Can you regulate the temperature?
by james dyson 12/7/2016 5:26:17 pm
No, this tile saw water heater does not have a temperature control function.
Can you put it in the tile saw tray with out any damages accur?
by Brad 1/1/2019 10:23:25 pm
The 5" water heater and will fit in most tile saw water trays with no damage occurring.
How hot will the water get?
by Dave 1/10/2019 12:19:07 pm
This heater takes tap temperature water up to 90 degrees Fahrenheit in about 10 minutes. Once the water is at the desired temperature you may want to turn off the heater to ensure that the water does not get to hot. This unit can bring water to a boil or very close to it if left unattended for an extended period of time.
16 reviews
GREAT HEATER FOR A WET SAW
by PHB -
IT HEATS UP VERY FAST, AND MAINTAINS THE TEMPERATURE.
Wish I had this years ago
by The General -
Very easy to use and fits in the water pan. I've used it in cold temps, around 5 to 10 degrees and it worked great. No complaints here!
Excellent Heater
by Claw -
Its great anywhere its cold and you work with water. The hands appreciate the warm water.
Good, but too slow for heating a hot tub
by Music Animation Machine -
The heater on my 500-gallon hot tub takes it up to 40 degrees C (104 degrees F), and I was hoping to use this heater to boost it up another few degrees, but it only increases the temperature of a gallon of water by about 8 degrees C in a minute, which means it takes about an hour to raise my tub's temperature 1 degree C --- and in that time, it cools off by about 1 degree, so it's only able to maintain the temperature, not raise it. It's well built and works as advertised, but ... I guess I should have done the math before I bought it.
Great Product [...]
by Stormin normin -
Great water heater. Keeps my 100 gal tank hot.
Nice warm hands
by Jake the tile guy -
This thing works great. It will take a tray full of water that is 50 degrees on warm it up over 100 in no time. By putting it right in the tray the water actually works like radiator for your whole saw. No more wet hands freezing to the tray, no more frozen water lines if you've been away for 10 mins. My only wish is that they made a slightly smaller version for my small wet saw. It tends to get in the way of the tray on my small saw.