Wacker Neuson Dryvex Portable Dehumidifiers

(0) No Reviews yet
SKU: 1112-AD115LGR
Wacker Neuson
5000620695
$2,406.38 to $2,406.38
This item requires a commercial addressFree shipping

Product Details

Product Details

Wacker Neuson Dryvex Portable Dehumidifiers Low grain refrigerant

The Dryvex commercial line of dehumidifiers will keep your construction and restoration projects on schedule and on budget by decreasing drying time and increasing production time for interior finish work. High impact roto molded housing, lightweight integrated design and greater moisture removal at lower temperature and relative humidity.


Features

  • Climate Control pulls more moisture from the air at lower humidity levels to decrease drying time
  • Low temperature operation to 40 °F continues to remove moisture from the air at colder, yet humid conditions
  • Twin 5" rear vents allow the warm, dry, processed air to be vented out or ducted with optional 10" lay flat or 2" x 5" sections of ductwork, to aid in drying area
  • Unit is CSA approved
  • Features 300 CFM blower to efficiently move more humid air through the system, delivering increased air changes per hour
  • Low grain refrigerant system removes more moisture from the air than conventional refrigerant systems
  • Digital hour meter, for recording job times, comes standard with back up battery unit to ensure the meter can be read even if the unit is unplugged
  • Electronic controls allow for convenient, quick setup and simple operation with no knobs or buttons that can easily be damaged in transport or on the job
  • Tough roto molded cabinet withstands the rigors of operation, making this machine extremely rental friendly
  • Integrated handles, both upper and lower, allow for easy lifting and moving and reduces the need for replacement parts

Wacker Neuson Dryvex Portable Dehumidifiers Low grain refrigerant

The Dryvex commercial line of dehumidifiers will keep your construction and restoration projects on schedule and on budget by decreasing drying time and increasing production time for interior finish work. High impact roto molded housing, lightweight integrated design and greater moisture removal at lower temperature and relative humidity.


Features

  • Climate Control pulls more moisture from the air at lower humidity levels to decrease drying time
  • Low temperature operation to 40 °F continues to remove moisture from the air at colder, yet humid conditions
  • Twin 5" rear vents allow the warm, dry, processed air to be vented out or ducted with optional 10" lay flat or 2" x 5" sections of ductwork, to aid in drying area
  • Unit is CSA approved
  • Features 300 CFM blower to efficiently move more humid air through the system, delivering increased air changes per hour
  • Low grain refrigerant system removes more moisture from the air than conventional refrigerant systems
  • Digital hour meter, for recording job times, comes standard with back up battery unit to ensure the meter can be read even if the unit is unplugged
  • Electronic controls allow for convenient, quick setup and simple operation with no knobs or buttons that can easily be damaged in transport or on the job
  • Tough roto molded cabinet withstands the rigors of operation, making this machine extremely rental friendly
  • Integrated handles, both upper and lower, allow for easy lifting and moving and reduces the need for replacement parts

Wacker Portable Dehumidifier
ModelAD85LGRAD115LGR
Capacity at 80°F, 60% RH85 pints/day125 pints/day
Length x width x height23.5 x 18 x 36.75 in23.5 x 18 x 36.75 in
Dry Weight100 lbs100 lbs
Air Flow300 CFM300 CFM
Machine temperature range50 - 95 °F50 - 95 °F
Voltage115 Volts115 Volts
Amperage7.9A (15A circuit required)11.3A (15A circuit required)
Compressor typeRotary 10,000 BTU (2.9 kW)Rotary 11,200 BTU (3.3 kW)
Drainage hose30 ft30 ft
Questions & Answers
No questions available

Be the first to Write a question

Ratings & Reviews

No reviews available

Be the first to Write a Review