3156 Laticrete Hydro Ban Pre-sloped Shower Pan

SKU: 3156
Manufacturer: Laticrete
$ 367.25 to $ 620.00

Please select options before adding to cart


Laticrete Hydro Ban Pre-sloped Shower Pan

Constructed of lightweight high-density expanded polystyrene, the Laticrete Hydro Ban Pre-Sloped Shower Pan includes a factory installed drain/waste line connection, is 100% waterproof, and ready-to-tile.


  • Pre-sloped ready to tile pan eliminates need for traditional mud bed installations
  • Lightweight and durable. Easy to transport and handle during installation
  • Freight shipping required for all 60'' pans to minimize handling
  • Code approved waterproofing meets ANSI A118.10 requirements
  • Factory installed drain assembly
  • Can quickly and easily be modified to size on site
  • Code approved, Meets IAPMO-PS- 46
  • Component of Laticrete Lifetime Warrant - Single source responsibility
  • Works in conjunction with Laticrete tile and stone installation materials
  • Comes with a curb, and one 10oz tube of Hydro Ban Adhesive
  • Only fits the Laticrete Hydro Ban 5" x 5" Grates - Sold separately

Available Sizes

  • 36" x 60" PVC or ABS Center Drain
  • 36" x 48" PVC or ABS Center Drain
  • 48" x 60" PVC or ABS Center Drain
  • 48" x 48" PVC or ABS Center Drain
  • 38" x 66" PVC or ABS Off Center Drain
  • Each unit comes with a curb, and one tube of Hydro Ban Adhesive and Sealant
  • Stainless steel grate is now sold separately

Custom Size Shower Pans Available

Questions & Answers (9)

7/22/2015 12:39:09

What should I use to "glue" the tile to this product?

You could use any modified or unmodified thinset (Laticrete does recommend using their thinset for warranty purposes).

9/14/2015 15:17:00

The 36x48 inch pan with the curb: does the curb add on a couple inches to the overall size? For example, if the area I have for the pan is exactly 36X48, will the curb increase the width of the pan to more than 36 inches?

The curb adds an additional 3" on every size water pan. Example: 36"X48" pan will make the overall demensions to 39"X48".

10/18/2015 20:41:54

What are the measurement for the drain for the off centered pan? Also can it be cut to fit a 60" x 36" area?

The pan can be cut to fit your room size. Custom Sizes are also available. Please call us (800) 709-0002 for more information.

10/6/2016 6:13:50

Can this be used in basement with concrete floor?

Yes, concrete floors are a suitable substrate for the shower pans.

2/3/2017 21:46:37

I want to remodel from a bath tub to a handicap shower (borderless). The new shower will be 5 ft x 5 ft. I have to remove 1.5 to 2 inches of the existing concrete floor to accommodate the new floor so it will be flush. Would you be able to custom make a pre-slope shower pan with these dimensions?

Yes, please send the HYDRO BAN Pre-Sloped Shower Pan Custom Dimensions Form to orders@contractorsdirect.com and we will reply with a formal estimate for you to review.

7/10/2017 18:40:29

Shower is 48 x 104, stud to stud, with shower heads at both ends of the 104" measurement. Can two 48 x 48 center drain pans be connected and use extensions at both ends to reach the inside length? Or, what would a custom pan, to the aforementioned dimensions, cost?

Thank you for contacting Contractors Direct.
If you have two drains in place or the ability to alter the plumbing to accommodate each pan drain, you can install a shower with your described configuration.

You can order a custom pan with the exact dimensions and drain placement. Fill out the custom pan form and submit so we can obtain pricing for you. Lead time is generally 2-4 weeks for custom pans from Laticrete.

7/8/2018 19:09:40

Do you sell just the curb? I will be needing a curb on two sides.


The curb is available.

Part # 9372-0005-CRB.

Please call 1-800-709-0002 to order.

3/19/2019 20:48:01

I’m doing a 36” x 36” shower stall. Is it best to cut the 36” x 48” prefab pan on-site or is it recommended to have the custom pan made to those dimensions instead?

Either method will work. The Hydro Ban Shower Pans are fully waterproof. You would need to treat the cut edges with Hydro Ban Waterproofing Membrane. You can also create a customer pan here. Custom pans have a 2-3 week lead time and are non-returnable and non-refundable.

8/21/2019 20:27:06

Can the pre-sloped showe pans be used underneath electric radiant heat?

Yes it can.

Ratings & Reviews

No reviews available

Be the first to Write a Review