D24000K Dewalt Wet Tile Saw, 2 Blades & Stand
Dewalt D24000 10" Wet Tile Saw with Stand and XP4 Diamond Blades
Be eligible to receive a DW130V Mixing Drill with the purchase of this product during our Monthly Special!!
The D24000S is a powerful, versatile, and lightweight electric tile cutter. It features a 1.5 HP motor, 24" rip cut/18" diagonal cutting capacity, and a cantilevering cart/rail system. The plunge cutting head also tilts to make 45/22.5° miter cuts.
- Rip cuts tile up to 24" x 24"; diagonal cuts up to 18" x 18"
- Lightweight - only 69 lbs
- Stainless steel rail system
- Plunge cutting head
- 45/22.5° miter feature
- Dual water nozzles
- Rear and side water attachments
- 1.5 HP direct drive motor
- 5 gallon water pan
- Water pan comes with compartment for holding diamond blades and accessories
- For tips on squaring your carriage tray click here
- Dewalt D24000 Tile Saw
- Dewalt Tile Saw Stand
- Dewalt DW4762 10" XP Wet Porcelain Blade
- (2) Dewalt DW4764 10" XP4 Wet Porcelain Diamond Blade
- Rip/Angle guide
- Water Pump
- Water Pan
- Side Water Collector
- Back Water Collector
- Cutting Cart Extension
- Operator's Manual
|Dewalt D24000 Wet Tile Saw Specifications|
|Power||Direct Drive - 1-1/2 hp (15 amps)|
|Length of Cut||24 in|
|Diagonal Length of Cut||18 in|
|Blade Capacity||10 in|
|Depth of Cut||3-1/8 in|
|Dimensions||36 in x 29 in x 20 in|
My "New" Dewalt saw shows some signs of use on the carriage tray but the rest of the saw looks new, did I get a returned saw?
by Anonymous 7/15/2015 1:16:34 pm
We only sell new Dewalt tile saws we do not offer used or reconditioned Dewalt tools, we have brought up the issue of the carriage tray with Dewalt and these "scuff" marks happen during production of the rubber top.
Help, my blade is touching the tray on my Dewalt Tile Saw.
by Anonymous 11/24/2015 3:32:15 pm
The adjustment screw on the back of the Dewalt D24000 tile saw will prevent the blade from touching the tray when changing from 45 degree miter cuts to 0 degree cuts.
Can you get same model in 240V ?
by JV 7/6/2018 6:09:12 am
We can only offer the 110V model of this unit.
Great saw that is lightweight and very powerful. Great value with extra blades.
I purchased this saw in April 2013 and have finally used it extensively in the past months. The service from Contractors Direct was outstanding with quick delivery.
I cut tiles for a shower & 2 bathtub surrounds, foyer floor, and most recently a large family room. In the process I cut diagonals, holes, slots, etc. Floor tiles were all 1' x 2'.
I am very pleased with the saw. It has plenty of power, easy to set up, and maintain. I agree with others that a LED light would be beneficial. The other change I would make is to add 9 or 10 more inches to the front of the table to support 2' tiles all the way, though the way it is works. It is fairly noisy, but irrespective of the motor noise, cutting tile is simply noisy. Adequate hearing protection deals with the noise quite fine.
I took someone's suggestion & added an air hose quick connector in the water line to make setup/take down simpler and it is a great idea.
I have had no problems and have had no warranty issues nor any issues with Contractors Direct.
I am so pleased that I did not settle for a lower priced saw and would purchase the same one over again. Despite the cost, it would have cost me more to rent a tile saw for the number of times I used it.
Well built, cuts very good. Well worth the money. Great deal. Shipped very fast.
This is the 5th dewalt tile saw I've purchased over 8 years. You can't go wrong with this beauty. I haven't bought five cause they break down but cause they are so reliable I have them on different jobs. They are easy and cheap to repair yourself. A little maintenance over the years and a bearing or 2 and the saw will last years upon years. I've replaced bearing 3 times over the course of about 6 years on one saw but that saw has seen a lot of action... Great product and fast fast shipping!!!
After checking out a lot of different Wet Tile Saws, I decided to go for this model. Accuracy is great and plenty of power to cut through the 1" marble tiles I'm installing. Some other reviews mentioned the motor made a lot of noise. Not my experience. Runs great and not too loud at all. My only problem was readjusting the sliding table to make it more smooth. Once that was in order, the table works great. Still a 5 star rating.
Also, this is an amazing deal with the extra blades, the stand, and the drill. The drill is powerful! I tried to get Lowes to match the price, but they couldn't beat it and told me to order it here. They were pretty amazed that the price included all the extras!
So, great price and great saw. Very much worth the investment.
Owner of Superior Construction Inc
by Melissa S -
Extremely happy with the tile saw. However, we still haven't received the full order. The table that the saw attaches to, was on back order and still is!