This allows the Husqvarna carriage tray to be adjusted up and down. The purpose of this is to make the carriage tray perpendicular (90 degrees) to the tray. The 2 offset wheels should be placed on the same side of the tray. If you prefer all centered bolts we sell these bolts individually (item 581240201).
542030049 Carriage Tray Wheels (4) for Husqvarna, Target, & Felker Tile Saws
- Product code: 542030049
- Manufacturer: Husqvarna
- MPN: 542030049
Carraige Tray Wheels (4) for Husqvarna, Target and Felker Tile Saws
- Wheels fit Husqvarna Tilematic TS 250X, Tilematic TS 250XL, Target TileMatic G2, Felker Tilemaster Plus, & Tilemaster XL Plus Tile Saw.
Question & Answers
1-7/16" diameter wheel with 3/16" width groove.
Ratings & Reviews
Most Helpful Reviews
Just what the doctor ordered, saw is ten years old and the tray was sloppy , rolling like new now!
Transaction was very smooth and professional. Product was very satisfactory and solved my problem.
I received two sets of wheels for double trays thinking it would be a quick change but when I opened the bag two wheels where like the ones shown in the picture and two wheels were adjustable that was for both bags. It is a real pain to install especially on felker with double trays. Every time you think there are right you have to pick up the tray to tighten the wheels and they move and you have to adjust them again. All four wheels should be the same like the picture and it would take about 5 minutes to change not one hour.