0254-0050-22P Laticrete 254 Platinum White Thin-set 56 Piece
Product Details
Laticrete 254 Platinum, White Polymer Fortified Thin-set Mortar, 56 Piece Full Pallet of 50 lbs. Bags
Laticrete 254 Platinum is the ultimate one-step, polymer-fortified, thin-set mortar that provides unsurpassed strength, far exceeding all ANSI requirements. Ideal for interior, exterior and submerged applications on virtually all substrates and applications. Excellent for all ceramic tile, porcelain, glass and stone installations.
Features
- Tenacious Bond - Superior adhesion to a wide variety of substrates and veneers, allowing for installations in virtually all climates and conditions such as exterior façades, pools and fountains
- 40 Minute Open Time - Increases productivity and flexibility on the job site, resulting in fast, accurate installations
- Smooth Creamy Formula - Easy to trowel mortar assures proper coverage on both the substrate and the veneer
- Specially Formulated for Porcelain and Glass Tile - Provides 2.5 times the ANSI requirement for shear bond strengths
- Stable, Long-Life Formulation - will not deteriorate over time, making it suitable for interior and exterior applications, particularly continuous submersion
- Equipped with Microban antimicrobial technology
- Microban provides around-the-clock product protection from the growth of microbes including bacteria, mold and mildew
- Integrated antimicrobial technology stays present and active for the expected lifetime of a product at a cellular level to continually disrupt growth and reproduction of contaminating microorganisms
- Mixing - Mix approximately 5.5 quarts/50 lbs. (5.2 L/22.7 kg.) of water per bag
- Packaging - 50 lbs. Bags come 56 bags to a Pallet
Suitable Substrates
- Exterior Glue Plywood (interior only)
- Properly Prepared Vinyl (interior only)
- Concrete/Masonry
- Concrete Block
- Cement Mortar Beds
- Existing Ceramic Tile
- Cement Backer Board
- Gypsum Wallboard
- Gypsum Plaster
- Cement Terazzo
| Laticrete 254 Platinum Approximate Coverage | |
| 1/4" x 1/4" (6 mm x 6 mm) Notched Trowel | 80-95 ft² / 7.4-8.8 m² |
| 1/4" x 3/8" (6 mm x 9 mm) Notched Trowel | 60-70 ft² / 5.6-6.5 m² |
| 1/2" x 1/2" (12 mm x 12 mm) Notched Trowel | 40-45 ft² / 3.7-4.2 m² |
Common Questions
How long does LATICRETE 254 take to cure?
Note: 254 Platinum does not require a minimum cure time for concrete slabs. Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate.
How do you mix LATICRETE 254?
When using to install Large Thin Porcelain Tile use up to 6 qts (5.7 L) of water for 50 lbs (22.7kg) of powder. Add 254 Platinum. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5–10 minutes.waterproof layer. Weighing approximately 5 lbs., installation of these foam backer board panels is a quick and easy job.
