99 Products

View by:

99 Products

9566 Pearl 17" TurboMax HD Pro Buffers

$939.00 to $1,319.00
  • Enjoy $50 off each machine from now until the end of January!
  • 1-1/2 HP Induction, Dual Capacitor Motor - choose between sealed induction and standard induction
  • 3 idle gear box - 175 rpm
  • Add to cart

    6091 Pearl DTL10HPXL P4 10" Porcelain Blade

    $61.00
  • 10" diameter 5/8" arbor.
  • Aggressive diamond matrix for wet cutting porcelain.
  • PA01HT Pearl Easy Hammer Trolley

    $1,189.00
  • Designed to Hold the Most Popular Demolition Hammers.
  • Easily Adjust the Hammer 20 to 80 Degrees for the Perfect Angle!
  • Fits 20 to 35 lbs hammers (not included).
  • TAK35PIN Pearl 1/4" Tuck Point Pin Diamond Bit

    $49.00
  • New Low Price!
  • Precise, Fast, Controlled Mortar Removal
  • Cuts away mortar in hard-to-reach places
  • Get close to window or door frames without over-cutting
  • 5711 Pearl VX10.2XL PRO Tile Saw & Stand

    $1,013.49
  • Free stand and diamond blade.
  • Rip cuts 24" tile, diagonally cuts 18" x 18" tile.
  • Powerful 2 hp belt driven motor
  • Only 23" long, New Stainless Steel water pan.
  • Weighs only 83 lbs
  • 9724 GreenSkin Flooring Underlayment Membrane

    $139.73 to $269.33
  • Enjoy 10% off GreenSkin products until the end of January 2017!
  • Zero VOC's or Solvents, Cuts install time by 50%
  • Crystal Clear Super Sticky PSA (Glue) Up to 1/2" Crack Strength.
  • Add to cart

    7005 Pearl Pro-V Diamond Blade

    $55.00 to $128.88
  • 12mm tall diamond segments.
  • Wet or dry cutting
  • Use on masonry saws, walk behind saws, & cut-off saws
  • Quantity pricing, buy 6 14" blades & Save 10% .
  • 1" & 3/4" (20mm) adaptor included.
  • Add to cart

    PEV1412XL Pearl Abrasive 14" Segmented Blade

    $49.00
  • New Low Price!
  • 14" blade, 1" arbor, large 12.5mm diamond segment
  • Max RPM: 5,400
  • Extremely versatile blade for use on a wide range of materials
  • 6093 Pearl Abrasive P4 Porcelain Reactor Blade

    $38.40 to $72.95
  • Enjoy 20% off all P4 reactor blades until the end of January 2017!
  • Ideal for cutting extra hard ceramics, porcelain and other hard/dense materials.
  • Add to cart

    6090 Pearl P4 Turbo Mesh Diamond Blade for Porcelain and Granite

    $27.50 to $61.75
  • Turbo-mesh rim eliminates heat caused by friction.
  • Thin Turbo-Mesh rim minimizes chipping.
  • Ideal for dry or wet cutting of extra hard ceramics, porcelain and other hard/dense materials.
  • Add to cart

    HEX17CBDCLT Pearl 15" Hexplate W Carbide Hexpin Assembly Complete

    $1,010.00
  • Super clutch will disengage if the Hexpin plate hits an obstruction.
  • Super clutch is self resetting, simply turn off buffer and restart, less downtime.
  • Safely prevents coupler breakage and buffer damage.
  • PA10 Pearl 10" Tile Saw

    $805.19
  • Additional free 10" DTL10HPXL premium porcelain blade.
  • Free shipping.
  • Weighs only 73 lbs.
  • 24" rip cut capacity. 18" x 18" diagonal cuts.
  • HEX1110B Pearl 11" Plate with 10 Blue Diamond Pins (hard bonded).

    $700.00
  • 11" Hexplates for 13" Buffers or 11" Single Head Floor Grinders.
  • Spring mounted pins to allow for uneven surfaces.
  • HEX1110G Pearl 11" Plate with 10 Green Diamond Pins (General Purpose).

    $641.00
  • 11" Hexplates for 13" Buffers or 11" Single Head Floor Grinders.
  • Spring mounted pins to allow for uneven surfaces.
  • 6564 Pearl VX141MSPRO 14" Masonry Brick Saw

    $1,308.60
  • Dual Voltage 2 hp, 115/230 Volts belt driven motor, 3600 Rpm.
  • Free 14" dry masonry cutting diamond blade
  • Free shipping from Pearl factory warehouse in the lower 48 states
  • 3010 Little Giant 170 GPH Small Submersible Pump PE-1F

    $70.20
  • Original replacement pump for MK saws, Dewalt D24000, and Pearl VX10.2XLPro tile saws as well as most 1-1/2 hp tile saws including Husqvarna.
  • 7548 Pearl P4 Double Row Diamond Cup Wheel

    $68.00 to $88.00
  • For fast grinding of concrete, masonry, stone and other masonry products.
  • Angled segments blow dust away from work area.
  • Fits most hand-held electric or air powered grinders.
  • Arbor: 5/8-11" threaded.
  • Add to cart

    7775 Pearl Carbide Hexpin Attachment

    $14.49 to $47.08
  • Replaceable four sided, abrasion resistant, carbide insert.
  • For scraping and removal of a variety of coatings and paints from concrete surfaces.
  • Add to cart

    6512 Pearl Diamond Hexpin® Attachment

    $42.00 to $57.00
  • Designed to be used for grinding and sanding concrete surfaces.
  • Choose from blue pin for Hard bonded for abrasive surfaces, coarse gold and green pin is for general purpose grinding.
  • Add to cart

    HEX1EZPAD-MFD Scrape and Grind Diamond Pad (sold individually)

    $80.00
  • NEW Pearl Scrape and Grind pads attachment scrapes away mastic, thinset, etc. and grinds the concrete at the same time.
  • Can easily be used with Hexpin® carbide plate (#HEX17CBD or #HEX17CBDCLT)
  • 7774 Pearl Hexplate Diamond Segmented Pads Attachment

    $6.04 to $151.10
  • Faster and more aggressive, hex pin diamond segmented pad attachment.
  • Can be used dry or wet on concrete surfaces 
  • Ideal for removing soft coatings & repairing, leveling, and grinding concrete.
  • Add to cart

    PA02TS Pearl Easy Hammer Tile Stripper Attachment

    $193.70
  • Machined out of a solid block of tool-grade steel, the Tile Stripper suits most jackhammer types and is built to last.
  • Included a durable 2mm (1/16") thick high tensile steel blade.
  • 9702 Pearl PA7PRO 7" Professional Tile Saw

    $650.00
  • Powerful 1 hp high torque motor.
  • 20" rip & 14" diagonal cut.
  • 7" professional diamond blade and water pump included
  • V31003-SP Pearl Plastic Roller Assembly (each)

    $12.60
  • Fits older VX10.2XL & VX7.2XL saw carriage tray.
  • PVC rollers assembly with ball bearings for easy cutting.