67 Products

View by:

67 Products

Laticrete Hydro Ban 5 Gallon Bucket with Troxell Knee Pads

$299.55
  • Enjoy a free pair of Troxell Super Soft Knee Pads during our Shamrock Savings Special!
  • Single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane
  • Laticrete HYDRO BAN® 3 x 5 ft. 1/2" Thick Board - 7 Piece Package with Screws and Washers

    $259.00
  • Enjoy a free box of screws and washers during our Shamrock Savings Special!
  • Lightweight! Under 5 lbs
  • 1/2 in. x 3 ft x 5 ft pane
  • Waterproof and ready to tile
  • 017703232K Laticrete 323 sq ft. Strata Mat Uncoupling Membrane

    $299.99
  • Use under ceramic, tile and stone installations with both modified and unmodified mortars.
  • Full roll 323 sq. ft. of coverage
  • Laticrete HYDRO BAN® Board 3' x 5' x ½" - Full Pallet (60 Units)

    $1,990.80
  • Lightweight! Under 5 lbs.
  • ½'' x 3' x 5' sheet panel
  • Waterproof and ready to tile.
  • Full 60 piece pallet

  • 7669 Laticrete Fracture Ban Primer

    $33.75 to $143.45
  • Fracture Ban Primer is a premium quality, water-based primer designed to be applied prior to the installation of the Fracture Ban membrane
  • Can be broom, roller or spray applied 
  • Add to cart

    0254-0050-21P Laticrete 254 Platinum Grey Thin-set Mortar 56 Piece Full Pallet of 50 lbs. Bags

    $1,919.00
  • Excellent for exterior and underwater applications, superior bond to exterior glue plywood and concrete.
  • Ultimate adhesion for porcelain and glass tiles.
  • HYDRO BAN 1-5/8" Screws 250 pcs Box

    $16.75
  • 250 piece Box of 1-5/8" screws for use in installing Hydro Ban Backer Board
  • Box designed for use with 7 Hydro Ban Waterproof Shower Panels
  • HYDRO BAN 1-1/4" Tab Washers 250 pcs box

    $21.60
  • 250 piece Box of 1-1/4" tab washers for use in installing Hydro Ban Backer Board
  • Only required for installing ceiling panels
  • 0254-0050-22P Laticrete 254 Platinum White Thin-set Mortar 56 Piece Full Pallet of 50 lbs. Bags

    $2,088.00
  • Excellent for exterior and underwater applications, superior bond to exterior glue plywood and concrete.
  • Ultimate adhesion for porcelain and glass tiles.
  • 9736 Laticrete Hydro Ban Linear Drain

    $341.99 to $744.00
  • Single slope to drain.
  • Allows for use of large format tile.
  • Tile in grate available to match floor tile.
  • Eliminates pre-slope and primary shower pan for a faster installation.
  • Add to cart

    3155 Laticrete Hydro Ban Shower Wall Niche

    $48.00 to $62.00
  • Multiple design options and sizes available adding utility and value to the shower installation.
  • Lightweight, durable, and ready to tile! Easy to transport, handle and adjust during installation.
  • Add to cart

    3156 Laticrete Hydro Ban Pre-sloped Shower Pan

    $144.00 to $620.00
  • Drain assembly can quickly and easily be modified to size on site.
  • Each unit comes with a curb, and one tube of Hydro Ban Adhesive and Sealant.
  • Stainless steel Grate is now sold separately.
  • Add to cart

    3159 Laticrete Hydroban Waterproofing Membrane 1 Gallon

    $75.00
  • 1 gallon (3.8 l ) pail liquid 50 s/f ( 4.7 s/m )
  • Forms a flexible and seamless waterproofing membrane.
  • 7358 StoneTech Stone Enhancer Water Based

    $32.00 to $441.00
  • Suitable for all natural stone surfaces including slate, marble, and saltillo.
  • Easier to use, water-based formula enriches color.
  • Standard protection against most stains for interior use.
  • Add to cart

    017703232 Laticrete Strata Mat Uncoupling Membrane

    $8.00
  • Uncoupling membrane for use under ceramic tile and stone installations.
  • For use with both modified and unmodified mortars.
  • 7668 Laticrete Fracture Ban Membrane

    $152.25 to $221.85
  • Fracture Ban Membrane is a pliable, light weight peel and stick membrane designed for use under ceramic tile, stone and other hard surface installations
  • Must be installed using Fracture Ban Primer
  • Add to cart

    0177-0150-XT Laticrete Strata Mat XT, Full Roll 150 sq. ft.

    $239.00
  • At 5/16" thick, this mat creates an even transition between 1/4” to 3/8" thick tile and 3/4" thick hardwood flooring.
  • For ceramic tile and stone installations serving as an uncoupling layer and vapor management layer.
  • using both modified or unmodified mortars.
  • 6201 Laticrete Latasil 10.3 oz Sealant Cartridge

    $13.99
  • High performance silicone sealant in 10.3 oz. caulking cartridge
  • For interior or exterior use in coves, corners, changes in plane and expansion joints in stone, thin brick or manufactured stone masonry veneers
  • Add to cart

    9200-0001-2-4 Laticrete Crack Suppression Kit

    $145.00
  • Two–part system consisting of a liquid rubber and reinforcing fabric.,
  • When cured, it forms a highly flexible membrane.
  • 9100-0200-2 Laticrete Tile & Drain Mat 200 sq. ft. Roll

    $879.00
  • 300% better flow rate than crushed gravel drain bed.
  • Engineered to permit maximum load transfer to structural deck while allowing lateral flow of infiltrated water to flow easily to drains.
  • JT750K L&M Laticrete JOINT TITE 750 Part A and Part B Kit

    $650.00
  • 5 gal (18.9 L) of “A” side and "B" Side
  • Fill and protect joints in industrial concrete floors subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges.
  • 0024-0001-2 Laticrete Latapoxy Waterproof Flashing Mortar 3.5 Gal

    $105.76
  • Waterproof Flashing Mortar is an epoxy-based 3 component, trowel applied, waterproofing, and vapor barrier membrane.
  • Can be used to waterproof seams, gaps or joints between a variety of substrates.
  • L310 Latapoxy 310 Stone Adhesive and Mixer

    $25.50 to $475.00
  • LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy adhesive.
  • LATAPOXY 310 Cordless Mixer is an exclusive dual component cordless mixer for LATAPOXY310 Stone Adhesive.
  • Add to cart

    S-310AB-NC-10 Laticrete Latapoxy 310 Stone Adhesive Full Unit Part A & B, 2 x 5 liters

    $475.00
  • Best speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation.
  • Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins.