133 Products

View by:

133 Products

8311 Edco SS-26 Self-Propelled 26" Concrete Saw

$11,393.72 to $21,793.28
  • 1-3/4 in. steel arbor shaft.
  • Includes electric start, 12 Volt battery and heavy-duty 30 Amp charging system.
  • Locking depth control allows operator to easily return to same depth,
  • Add to cart

    7970 Edco Dyma-Serts For Concrete

    $158.31
  • Sold individually requires 3 per head.Holding case & wood wedges sold separately.
  • Long lasting- up to 30,000 sq feet (2,800 sq meters) of grinding action.
  • Add to cart

    A151 Edco DYMA-Slider Tool Box Kit for 2EC/2GC-NG, 2DP (Hard)

    $1,599.90
  • 18 Grit Dyma-Segs (6), 30 grit Dyma-Dots (6), 30 grit Dyma-Arrows Left (3), 30 Grit Dyma-Arrows Right (3), PCD w/ Backing Left (3), PCD w/ Backing Right (3).
  • Ideal for the removal of Hard Tacky Surfaces, Epoxy
  • 7889 Edco Scarifier Start-UP Kits

    $650.37 to $2,034.12
  • For use with Edco Scarifiers.
  • Models CPM-8, CPM-10, CPU-10FC, & CPU-12.
  • Shafts, Carbide & Pointed Steel, Kits Available.
  • Drum not included.
  • Add to cart

    97330 Edco 14" Electric Concrete Chain Saw

    $3,248.07
  • Cutting depth up to 14" with standard bar
  • Suitable to cut small openings, deep pockets and finishing corner cuts for walls
  • Includes guide bar & diamond chain
  • 8327 Edco DS18 18" Concrete & Asphalt Saw

    $2,389.00 to $2,466.12
  • Gasoline (13hp), electric (5hp 230V) options.
  • 18” blade capacity.
  • optional water tank assembly kit available.
  • Free shipping from factory warehouse.
  • Add to cart

    9713 Edco Quick Change Diamond Dots

    $37.12 to $65.50
  • Single or double diamond dots.
  • Available in grit sizes 30, 70 and 120.
  • For soft, medium and hard concrete.
  • Fits Edco 7" or 10" Turbo grinders.
  • Add to cart

    ALR-E 5 ft. EDCO Ergonomic Air Chisel Scalers C10342

    $874.38
  • Ergonomic design lets operator stand upright eliminating backaches.
  • Scraper blade available for vinyl floors, wall tile, thin set etc.
  • Weight 18.5 lb, 2,500 blows per minute.
  • Free Shipping
  • 8204 Edco TS-8-75L Tile Shark Floor Stripper

    $1,514.58
  • Folding handle for easy transport and storage. Folds to 20” to easily fit into a car trunk
  • Sharktooth wrench for easy blade changes
  • Push plate & built-in weight make material removal a quick & easy job
  • ALR-BS Edco Big Stick Ergonomic Chisel 27100

    $1,380.60
  • Removes tiles, carpeting, roofing materials, fireproofing, rubber coatings, waterproofing, linoleum, insulation, asbestos, mastics, paint build-up, & ice.
  • Free Shipping.
  • 7862 Edco 10" CPM-10 Scarifier

    $4,337.03 to $4,744.19
  • Edco Scarifiers will Clean, Texture,Level, Groove, and Remove material from concrete flooring.
  • 10" working width will scarify approximately 450-600 sq ft per hour at depth per pass of 1/8".
  • Includes drum with shafts.
  • Add to cart

    7874 Edco 10" Magna-Trap Turbo Grinder

    $4,135.08 to $6,517.86
  • Grind, repair and smooth rough surfaces and concrete slabs.
  • One of the best tools for removing epoxy or urethane thin-coats, thin-set and mastics, and industrial or paint build-ups.
  • Add to cart

    9726 Edco Magna-Trap Dual Disc Floor Grinder

    $4,203.15 to $5,145.84
  • New redesigned EDCO Magna-Trap concrete floor grinders!
  • Smooth rough surfaces, repair damaged concrete slabs.
  • Remove urethane or epoxy thin-coats, mastics and thin-set, industrial or paint build-ups
  • Add to cart

    58100 Edco 2D-HDE, 5 HP, 230 Volt Heavy Duty Floor Grinder/Polisher

    $7,959.00
  • 22″ Working Width grinds approximately 500 sq. ft. per hour at 1/32″, 1/16″ per pass with Magna-Trap™ Dyma-Dots.
  • GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap Slide-On Tooling.
  • 9960 Edco Hand-Held Core Drills

    $1,150.21 to $1,469.62
  • Soft Start Motor.
  • Lightweight, Compact, Easy to Use.
  • Capable of WET or DRY drilling.
  • 3 1/4" Garden Hose hook-up adapter for wet drilling.
  • Compatible with standard core bits.
  • Add to cart

    7872 Edco TMC-7 Turbo Max Combo 7" Floor Grinder

    $2,750.03 to $3,061.60
  • Electric model has a Flexible Head.
  • Gas model has a Rigid Head.
  • Smooth rough surfaces and repair damaged concrete slabs.
  • Remove urethane or epoxy thin-coats, mastics and thin-set, industrial or paint build-ups.
  • Add to cart

    58900 Edco TL-9 1.5HP 110V Turbo-Lite Direct Drive Grinder

    $2,650.00
  • Resurfacing hundreds of sq ft. per hour.
  • Removing hard coatings.
  • Working in compact areas.
  • Some Edge Grinding applications.
  • 8305 Edco 14" Downcut Concrete & Asphalt Saw

    $2,175.39
  • Choose from 9 hp, 11 hp or 13 hp Honda motor option.
  • New 8" Wheels provide smoother cutting action with less vibration.
  • New lifting bail assists with easy loading and unloading.
  • Add to cart

    59800 Edco Wedgeless Single-Disc Grinder (SEC-NG) 1.5HP-115V

    $3,253.25
  • 11″ working width will grind approximately 200-250 sq.ft. per hour at 1/32″ with EDCO Magna-Trap Dyma-Dots.
  • GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s NEW Magna-Trap Slide-On Tooling.
  • 7973 Edco Strip Serts

    $97.36 to $113.16
  • Assembly includes Strip Sert Case and 4-sided Carbide Chip. Sold individually requires 3 per head
  • Replacement pack includes an allen wrench and 6 of the following: 4-sided carbide chips, screws, & washers. 
  • Add to cart

    ALR-5 5 ft. EDCO Straight Air Chisel Scalers C10301

    $872.82
  • Use chisel for removing concrete, floor tile, etc.
  • Scraper blade available for vinyl floors, wall tile, thin set etc.
  • Weight 18.5 lbs. 2,500 blows per minute.
  • 4" chisel included.
  • Free Shipping
  • 98400 Edco 20" Automatic ProScrubber APS-20

    $4,999.90
  • Squeegee width 30” with 65 lb of scrubbing pressure.
  • Cleans 16,000 Sq. Ft. per Hour.
  • Ideal for cleaning grout tile lines typical of those found in shopping malls.
  • 7861 Edco 8" CPM-8 Walk Behind Scarifier

    $3,908.04 to $4,341.29
  • Edco CPM-8 Scarifier will Clean, Texture,Level, Groove, and Remove material from concrete flooring.
  • 8" Working width will scarify approximately 350-500 sq ft per hour at depth per pass of 1/8".
  • Includes Drum and six Shafts.
  • Add to cart

    53904 Edco Contrx Polishing Kit

    $1,473.78
  • Polishing Kit includes 6 each of 400, 800, 1800, 3500, Buffing grit V-Har Felt polishing pads