9359 Wacker PG 3A 3in Centrifugal Dewatering Pump

Centrifugal dewatering pumps are the value alternative for keeping jobsites dry
WACKER's PG dewatering pump series has been designed to handle the removal of relatively clean job-site water.
With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.

Features and benefits

• Cast iron impeller and volute are wear resistant for long life and minimal service.
• Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
• High strength lightweight diecast aluminum housing increases the years of trouble-free pump life.
• A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.
• Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters.

Description	Metric		Imperial
Suction & discharge diameter	75	mm	3	in
Length x width x height	515 x 405 x 460	mm	20 x 16 x 18	in
Operating weight	31	kg	69	lb
Shipping weight (including packaging)	34	kg	75	lb
Shipping size	540 x 430 x 490	mm	21 x 17 x 19.5	in
Max. head	30	m	98	ft
Max. discharge	1.000	l/min	264	US gpm
Max. suction lift	7,5	m	25	ft
Solid size capacity	6,5	mm	.25	in
Engine Type	air-cooled, 4-cycle, single cylinder, gasoline engine Honda
Displacement	163	cm3	9.9	in3
Max. power output	4,1	kW	5.5	hp
at	3.600	1/min	3,600	rpm
Operating power	3,7	kW	5.0	hp
at	3.600	1/min	3,600	rpm
Fuel tank capacity	3,6	l	3.8	US qt
Fuel consumption	1,8	l/h	1.9	US qt/h