|
|
|
|
|
|
|
|
Gemini Taurus 3 Tile Shaper Ring Saw
- Light duty ring saw, using the same technology found in the Revolution wet saw.
- The tool's cutting blade is a veritable "ring" of stainless steel whose 360 degree surface is completely coated with diamond grit.
- You can feed a piece of wall tile or glass into the blade from any direction and get a clean, accurate cut.
- Since the blade cuts so precisely, no further grinding is necessary.
- It produces finished cuts with intricacies that are impossible with conventional cutters.
- Portable, as it is easy to lift the motor and saw housing from the basin.
- Tile Shaper Separating Blade sold separately.
Technical Data
- 17 3/4” x 16” work surface.
- 5-5/8” throat depth.
- 1-1/2” throat height.
- 1/5 horse power motor.
- 110 volt
Included:
- 1 Mega Blade (installed).
- Integrated spot light.
- Removable face shield.
- 1 Stabilizer Foot
- 1 Instructional DVD and user manual.
Handheld Unit
- The Taurus 3 is shipped with all of the components to use it as a hand held saw
- Bottom door ( soak bottom door in water
before using to lubricate blade).
- Thumb screw.
- Bottom door clip.
Taurus 3 Blades
- All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics
such as acrylic and lexan, and anything that has a similar density to these materials.
- All blades use the same belt and grommets. Blades are interchangeable with the same belt
and grommets and do not need to be changed unless they are excessively worn.
- Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for
each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.
| 4773 Gemini Taurus 3 Tile Shaper Ring Saw |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
