Pearl Abrasive Tile Saws & Stone Saws

View by:

Pearl Abrasive Tile Saws & Stone Saws

PA10KIT Pearl 10" Tile Saw and Stand

$952.10
  • Free shipping
  • Weighs only 73 lbs.
  • 24" rip cut capacity. 18" x 18" diagonal cuts
  • 5711 Pearl VX10.2XL PRO Tile Saw & Stand

    $1,220.70
  • Free stand and diamond blade.
  • Rip cuts 24" tile, diagonally cuts 18" x 18" tile.
  • Powerful 2 hp belt driven motor
  • Weighs only 83 lbs
  • 518940 Little Giant 170 GPH Small Submersible Pump PE-1F

    $70.20
  • Original replacement pump for MK saws, Dewalt D24000, and Pearl VX10.2XLPro tile saws as well as most 1-1/2 hp tile saws including Husqvarna.
  • V31003-SP Pearl Plastic Roller Assembly - Sold Individually

    $12.60
  • Fits older VX10.2XL & VX7.2XL saw carriage tray
  • PVC rollers assembly with ball bearings for easy cutting
  • 5712 Pearl VX10RS 10" Rail Saw

    $1,382.80
  • Rip cuts 37", diagonally cuts 26" tile
  • Heavy duty direct drive 1.5 hp motor, 115 volts
  • Free Shipping from Pearl factory warehouse to a commercial address in the lower 48 states
  • PA7PROKIT Pearl PA7PRO 7" Professional Tile Saw and Stand

    $700.15
  • Powerful 1 hp high torque motor
  • 20" rip & 14" diagonal cut
  • 7" professional diamond blade and water pump included
  • V31003M Pearl Metal Roller for VX10.2 Tile Saw

    $14.20
  • Fits VX10.2XL & VX7.2XL saw carriage tray.
  • Metal rollers with ball bearings for easy cutting.
  • Use only with stainless steel rails.
  • V38008 Pearl Side or Front Table Extension

    $53.49
  • Side Extension Table VX-10.2XL or CX10 tile saw
  • Get added support when cutting large tile
  • Table fits either side or front of cutting cart
  • V35011P Drip Tray for Pearl VX10.2XL Pro Wet Tile Saw

    $49.95
  • Drip Tray for Pearl VX10.2XL Pro Wet Tile Saw
  • V35010-UVXL Universal Pearl Tile Saw Stand

    $144.20
  • Fits all current model saws 2014 or later model VX10.2XL Pro PA10 and VX10.2L, wet tile saws
  • V35010-UV Pearl Abrasive Universal Tile Saw Stand

    $132.23
  • Fits old model saws before 2014 model VX10.2XL Pro, VX10.2L, and all models of CX10, PA7 wet tile saws
  • Please contact Pearl Abrasive @ (800) 969-5561 if you are unsure of which stand your saw may need
  • V370064 Pearl Abrasive Master Guide

    $68.88
  • Fits all Pearl wet tile saws
  • S1000-34 Pearl Tile Saw Miter Block

    $69.09
  • Adjustable miter box to 45 and 60 degree
  • Fits all Pearl wet tile saws
  • V31004-MA Pearl Abrasive Tile Saw Spacer Roller

    $0.95
  • Fits VX7.2XL & VX10.2XLPRO table assembly
  • Two spacers required by rollers assembly
  • V370060 Pearl Abrasive Angle Guide

    $68.88
  • Fits all Pearl wet tile saws