|
|
|
|
|
|
|
|
|
|
Pearl 10" DTL10HPXL P4 Porcelain Blade
Super high performance blades for cutting hard tile & porcelain.
Tile Cutting Technology
- Smooth Thin Kerf for Chip-Free Cutting.
- High Strength Core Eliminates Wobble and Wrapage.
- Special Bond Design for Hard Porcelain.
- 8mm High Rim, .060" Rim Width.
- 10" diameter, 5-8" arbor.
- Laser Cut Cooling Holes Dissipate Heat for Extended Blade Life.
- Optimal Blade Thickness for Speed/Accuracy of cut.
- Outperforms Other Premium Porcelain Blades.
- Extra Hard Tile, Ceramic Tile, Natural Stone, Granite, Hard Tile, Hard Ceramics, Porcelain.
- Aggressive diamond matrix for wet cutting porcelain.
- Keeping your diamond blade cool, will extend life and improve performance, reduce dusty, remove cutting.
- Wet cutting diamond blades must be used with a continuous water flow to prevent heat build up, damage and hazard during cutting.
- Check saw or tool before using a wet cutting diamond blade.
| 6091 Pearl DTL10HPXL P4 10" Porcelain Blade |
EXCELLENT PRODUCT ..!!!!!!, 12/17/2005
By SIBER (MARCO ISLAND, FL)
I Highly Recommend it...... One of the best, 3/6/2006
By Builtmany (NJ, )
One of the best I have used. This lasted through 15+ jobs and thousands of cuts. Most of my jobs are porcelain tiles so less expansive blades cut slow in comparison and don't last like this one will. Better than the last blade I had!!, 6/14/2006
By Farmboy (Moses Lake, WA, )
I did a lot of checking and heard a lot of good things about this blade and another higher dollar one. Decided to give this a shot and it does very well. I have set about 600 sq ft of tile in a pinwheel pattern or on a 45 degree angle (a lot of short and long cuts on 18 inch tile) and the blade has done great. For the $$$, definitely a great deal! Best porcelain blade we have found., 6/23/2006
By The outdoor kitchen guy (Bridgeport, Texas, )
This is the most durable porcelain blade we have found in ten years of cutting nothing but porcelain. Every other blade we have tried has become dull, {some as fast as two days} or has gone out of round or starts cutting crooked. I have used one of these blades constantly 8hrs a day for up to four weeks with no problem. Needed for porcelain tile, 12/10/2006
By Dennis (Evergreen Park, Illinois, )
This blade was recommended by the on-line staff. It cuts easy and goes through porcelain tile well. After doing a couple of walls, I did dress the blade with the dressing stone that came with the MK100 tile saw. great blade, 12/24/2006
By Dman (Philly, Pa, )
this blade cuts all porcelain yet it will cut marble too when needed. Its super sharp i buy a different porcelain blade each time they go but this ones sweet VERY BEST WE HAVE FOUND FOR PORCELAIN, 5/25/2007
By THE OUTDOOR KITCHEN GUY (DALLAS, FT WORTH TEXAS, )
THIS IS THE VERY BEST LONGEST LIFE BLADE WE HAVE FOUND FOR PORCELAIN IN TEN YEARS OF WORKING WITH PORCELAIN MATERIALS. WE RUN A PRODUCTION SHOP BUILDING BARBECUE ISLANDS AND USE ONLY PORCELAIN TILE ON THEM. I HAVE HAD THIS BLADE OUTLAST ALL OTHERS BY TWO TO ONE. Great Blade, 11/25/2011
By Eric (GREENLAWN, NY)
I have only used this blade for one job but it works fantastic.
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
